Tender For Go Down And Apni Dukan Material, ashoknagar-Madhya Pradesh

Tender For Go down And Apni Dukan Material; 1.01Profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep nbs will subtle square fluting in the five pan at nominal 203 mm center-to-centre. The end nb shall be designed for anti-capillary action to avoid any seepage of water through the lateral overlap. The profile sheet of 0.5 mm thik. Hi strength steel with mn 550 MPa yield strength metallic hot dip coated with Aluminum Zinc alloy (55% Alluminium, 45% Zinc) as per AS 1397. Zincalume AZ150 (min 150 gms/sq.mt. total on both sides) with steel quality paint coat. The paint shall have a total coating thickness of nominal 35µm comprising of nominal 20 µm exterior cost on to surface and nominal 5 µm reverse coat on back surface over nominal 5 µm primer coat on both surfaces. The sheet shall have brand making of the manufacturer given product details on the back of the sheet at every 1 meter c/c for confirming genuinely of the material. Size - 22X4.25 & 12X4.25 & 10X4.25 Total-7692 (Sq.Ft.)1.02G.S. Sheet roofing Providing and fixing pre coated gaivanised steel sheet roofing accessories 0.50 mm + 0.50% total coated thickness. Zinc coating 120 gsm as per IS 277 in 240 mpa steel grade 5.7 microns epoxy primer on both side of the steel and polyester top coat 15:18 microns using self dolling/self tapping screws complete 12:126:1 Ridge Ridges plain (500- 600mm)1.03Steel works in built up tubular (round square or rectangular hollow tubes etc) trusses/frame work etc. including cutting hosting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc, complete (10K15:1 Hot finished welded type tubes)1.04M.S. Rolling shutters with installation.I.S.-4454-part 1 and M.S. top cover of required thickness for rolling shutters 10.6.1.125 mm thick top 80X1.25 mm M.S. Laths with 1.25mm thick top cover.1.05ISI Rectangle Pipe for Shed stand Size - 4X4 (Inch) Approx 400 Kg1.06ISI Pipe for Chord/rafter/webs Size - 3X2 (Inch) Approx 1300 Kg1.07ISI Pipe for Batten. Size 2X2 (Inch) Approx 700 Kg.1.08ISI Pipe for shad side support. Size 2X2 (Inch) Approx 400 Kg.

INR 500 /-

INR 35000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document-1	0 KB
Click here to download tender document	Tender Document-1	0 KB
Click here to download tender document	Tender Document-1	0 KB
Click here to download tender document	Tender Document-1	0 KB