Tender For Construction Of Building For Anganwadi No.26Ward 4Budhanoor Gp, Alappuzha-Kerala

Tender For Construction of building for Anganwadi no.26Ward 4Budhanoor GP-- Stone Aggregate(Single Size) 40 mm nominal size 2 Stone Aggregate(Single size)20 mm nominal size 3 Coarse Sand(Zone III) 4 Portland Cement 5 Hire Charges of concrete mixer 0.25 to 0.40 cum with hopper 6 Vibrator(Needle type 40 mm) 7 Sundries 8 Stone Aggregate(Single Size)10 mm nominal size 9 wall form panel1250x500 mm 10 Corner Angle 45x45x5 mm 1.50 m long 11 100 mm channel shoulder 2.5 m long 12 Double clip(bridge clip) 13 Single Clip 14 M.S.Tube 40 mm dia 15 Hire Charges of Diesel road Roller-8 to 10 tonne 16 Diesel oil 17 Solid blocks of size 30x20x15 cm 18 Solid blocks of size 30x20x20 cm 19 Solid blocks of size 40x20x10 cm 20 Structural steel such as tees,angles,channels and R.S. joists 21 Red oxide zinc chromate primer 22 Adjustable span ESO+SI(2.35-3.40) 23 Adjustable telescopic prop 3 m(2.02-3.75 m) 24 Beam clamp 300-380 mm (450-1070 mm) 25 Second class kail wood in planks 26 Second class kail wood in scantling 27 Hollock ballies 125 mm diameter 28 wall form panel 1250x450xmm 29 corner angle 45x45x5 mm 2.50 long 30 column clamp 450x1070 mm 31 Prop 2 m(2-3.5 m) 32 Twisted steel/deformed bars 33 Anjili wood scantls 34 Mild steel round bar above 12 mm dia 35 Flats up to 10 mm in thickness 36 Rawl plug 50 mm(designation 10 nos) 37 Anjiliwood planks 38 Pincoda wood planks 39 Float glass sheet of nominal thickness 4mm (weight not less than 10 kg/sqm) 40 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 41 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 42 Bright finished or black enameled mild steel screws 40 mm 43 Bright finished or black enameled mild steel screws 20 mm 44 Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm 45 Bright finished or black enameled mild steel screws 50 mm 46 Anodised Aluminium handles 125 mm with plate 175x32 mm 47 Chromium plated Brass screws 25 mm 48 Anodised aluminium hanging type door stopper 49 Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles 50 Anodised aluminium tower bolt(barrel type)200x10 mm 51 Chromium plated brass screws 30 mm 52 Iron hooks&eyes 100 mm 53 Fine sand(zone IV) 54 Vitrified floor tile 50x50 cm 55 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy ,bottle green black 56 Water thinnable cement primer for interior wall surface ,havingVOC content less than 50 gms/litre 57 Plastic emulsion paint 58 Pink primer (for wood) 59 Synthetic enamel paint in black or chocolate shade 60 Vitreous china orrisa type w.c.pan size 580 mm 61 Flushing cistern P.V.C. 10 lts capacity(low level )(white)(with fittings ,accessories and flush pipe) 62 100 mm S.C.I trap with vent heel 63 vitreous china flat back wash basin 630x450mm 64 15 mm C.P brass tap 65 C.P brass waste 32 mm 66 C.I.bracket for wash basin and sinks 67 Stainless steel kitchen sink-without drain board 470x420 mm bowl depth 178 mm 68 semi rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 69 PVC pipe 20 mm outer dia 10 kfg/cm2 70 PVC pipe 25 mm outer dia 10 kgf/cm2 71 PVC pipe 50 mm outer dia 6kgf/cm2 72 PVC pipe 63 mm outer dia 6kgf/cm2 73 PVC pipe 110 mm outer dia 6kgf/cm2 74 PVC Elbow 63 mm dia 75 PVC vent cowl 63 mm dia 76 Polyethylene water storage tank with cover and suitable locking arrangemnet 77 15 mm PTMT bib cock 78 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished(matt finished) 79 Powder coated M.S.butt hinges 100 mmx58 mm x1.9 mm

INR 2760 /-

INR 26527.0 /-

INR 10.61 Lakhs /-