Tender For Mwc (Sr) To Upgradation Of Interpretation Center At Bharhut, Dist. Satna; 1 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. [Window Guard bars grill of approximate size 2.1x2.15 square meter, having three horizontal angle of size 50x50x5 mm, two at both ends and one at center and eighteen MS square bars of size 16x16 mm with c/c 100 mm & five vertical MS angle of size 50x50x5 mm, on two ends and three at center and 16 MS square bars of size 16x16 mm with c/c 100 mm.] 2 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 4 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture 5 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .: With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) 6 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade 7 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone - exposed face fine dressed with rough backing 8 Re fixing of door panel with hinges and installation of L drop, stopper and handle complete 9 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 10 Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturation level and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls. (02 Coats) 11 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required,to achieve even shade and colour. Two Coat 12 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-incharge.[12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.] 13 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 14 Provision for supply and installation of sandstone CNB of approximate size 1.90 m x 0.90 m or more as per text & thickness 100 mm over already constructed platform with engraved text (both Hindi and English) as provided and approved by circle office, including design, engraving, placing and installation complete with all labour, material and lead and lift. 15 Electrical Work at interpretation center 16 Supply and laying of branded armoured four core three phase electrical cable with PVC pipe laid under groud ground and making all necessary connection to main power supply and to interpretation center MCB Box 17 Supply and fixing required MCB at MCB box with all necessary connections with main supply line to room of interpretation center 18 Supply and fixing of Electrical boards with all necessary switches, power plug, fan regulator, light switches complete with all necessary wiring and connecting to electrical supply line complete 19 Supply and fixing of Electrical boards with single switches & power plug complete with all necessary wiring and connecting to electrical supply line 20 Supply and fixing of branded copper electrical ceiling fan of blade size 1200 mm complete including hanging with hook and all electrical connection complete 21 Supply and fixing of branded 20W tube light with all necessary article and electrical connection with switch boards complete 22 Supply and fixing of branded 20W LED bulb with all necessary article and electrical connection complete 23 Supply and fixing of branded exhaust fan with all necessary article and electrical connections 24 Provision for repairing and maintenance of exisiting electrical wiring and making complete with all necessary wiring, connections, joints, casing, insulation complete. 25 Supply and installation of branded invertor with 01 battery, trolley complete including all necessary fitting, connections 26 Supply and installation of branded false ceiling light of size 2x2 feet with necessary wiring, supply and installation of switch board, cabling with electrical line, fitting including all necessary electrical connection complete 27 Plumbing Work at interpretation center 28 Laying of PVC water pile line of decreasing size from existing bore well to interpretation center and connecting with it water storage tank at interpretation center with all decreasing diameter PVC pipe from 2.5 to 1 inches, sockets, union, elbows, jointer, one way and two way valve complete including digging and refiling of earth. 29 Supply and fixing of water motor submersible pump 2HP with starter at interpretation center complete with electrical connection and connecting water motor pump to supply water pipe line 30 supply and installation of 1000 Liter water storage tank and connecting with water supply and distribution line. 31 Supply and installation of brande 80L water cooler with inbuit purifier complete with all necessory material 32 Supply and installation of stainless steel taps complete with all labourer and material 33 Provision for supply and installation of necessary articles need in interpretation center 34 Supply and installation of branded 98 inches Ultra HD LED TV including all backside plyboard pannel with sheet including all necessary connection with power supply and TV wall stand complete 35 Provision for supply and installation of branded 2 Ton Tower AC, of 05 star rating, split system installation type complete with all necessary material and fitting charges(Interpretation Room & Meditation Room 02 in each ) 36 Provision for supply and installation of branded 2 Ton Split AC , complete with all necessary required material and installation charges of indoor and outdoor unit complete at first aid room. 37 Purchase of T&P and other miscellaneous items necessary during work
