Tender For Renovation Works Of Cafeteria At Terrace Floor Phase Ia - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, of approved brand & manufacturer,in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Full body Vitrified tile of 600x1200 mm 2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm 3 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm 4 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. 5 Providing and fixing PTMT grating of 100mm dia approved quality and colour sundries of materials and fixing charges 6 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 7 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish.Non-asbestos multipurpose cement board reinforced with cellulose fibre cement manufactured through autoclaving process(high pressure steam cured)as per IS : 14862 with suitable fibre cement screw 8 mm thick 8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including scaffolding for all heights. The rate inclusive of all material charge, labour, transportation, Scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights, complete as per the direction of engineer in charge. 9 Steel work in build up tubular (round, square or rectangular hollow tubes etc)trusses etc.including cutting, hoisting.fixing position and applying priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finishined seamless type tubes and painting with two coats of primer as per the instructions of the Engineer in charge 10 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 11 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work 12 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work 13 Finishing wood work with Melamine polish thinner(30%):New work(Two or more coat applied @2.2ltr/10sqm)over and including two coats of melamine sealer with thinner(30%)@2.2ltr/10sqm wood filter wherever required all complete as per direction of engineer in charge. 14 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board of size 610x460 mm bowl depth 200 mm 15 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms with 15 mm nominal bore 16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore 17 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes 18 Providing and fixing table top wash basin with Providing and fixing of single 15 mm C.P Brass Pillar Taps of approved make and design, conforming to IS:1795 standards,32 mm C.P. brass waste coupling of standard pattern,CERA equivalent make ISI mark 89:31, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin of size 550x 400 mm,including CP Brass valve for basin mixer geyser points of approved quality confirming to IS:8931. including necessary washers, tightening, and fixing complete as per the direction of the Engineer-in-Charge. 19 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:Rectangular shape 453x357 mm 20 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length and 15 mm nominal bore 21 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete with 25 mm nominal bore 22 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete with flexible pipe of 40 mm dia 23 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms 24 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
