|
| 1 | Dismentling of brick work or stone work in lime or cement mortar and i/c staking or material as directed by the engineer-in-charge with ina distance of 60 meter (200 feet) with foundation |
| 2 | Deduction of old and workable brick 40% of item no-1 |
| 3 | Deduction of old brick bats 60% of item no-1 |
| 4 | Excavation in foundation in ordinary soil( Loam,clay or sand) including lift up to 1.5 M,and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the plinth and removal and disposal of surplush earth as directed by the Engineer-in-charge up to a distance of 30 M from the foundation trenches (Where machine con not reach/move) For building work only,(Excluding royalty) (Chap-04 251) |
| 5 | Earthwork in cutting or in embankment by manual mean in ordinary soil, excavation to be in the from of regular pits not exceeding1/2 meter (20\") depth and earth work in embankment to be in 20cm (8\") layers including ramming and dressing the surface to required level and slopes and also including 1.5 M(5\") lifts and 30M (100ft) lead.distanceas directed by the engineer-in-charge |
| 6 | Cement Concrete with 4cm gauge approved Stone ballast coarse sand and cement in proporation of 1:4:8 inculuding supply of all materail labour and T&P etc.required for proper completion. |
| 7 | M-150 brick work in 1:5 with one cement and Five course sand mortar in foundation or Sub structure including cutting necessary and moulding of brick inculuding supply of all meterials,labour and T&P etc.reuired for proper complete of work. |
| 8 | M-150 brick work in 1:5 with one cement and Five course sand mortar in Super structure including cutting necessary and moulding of brick inculuding supply of all meterials,labour and T&P etc.reuired for proper complete of work. |
| 9 | R.C.C work with cement approved coarse sand and 4 Cm gauge approved stone grit in proporation of 1:2:4 in R.C.C Raft foundation and footing excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 10 | R.C.C work with cement approved coarse sand and 2 cm gauge approved stone grit in proporation of 1:2:4 in R.C.C lighter beam having Spans upto 6mtr excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 11 | R.C.C work with cement approved coarse sand and 2 cm gauge approved stone grit in proporation of 1:1.5:3 in R.C.C coloum excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 12 | R.C.C work with cement approved coarse sand and 2 cm gauge approved stone grit in proporation of 1:2:4 in R.C.CT-beam,Slab Roof and RCC columns excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 13 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications complete as per MORTH IInd Revision 2019 Specification 1600. |
| 14 | 12mm thick Plaster in 1:4 with cement,coarse sand mortar including supply ofall material ,labour and T&P etc.required for proper completion of work |
| 15 | Providing and laying vitrified floor tiles (BELL/KAJARIA?SOMANI or other standard make) in differentsizes )thickness to be specified by the manufacturer) with waterabsoption less than 0.08% and conforming to IS 156522 of approved make in all colours and shaded laid on 20 mm thick cement mortar 1:4 (1 cement 4 coarse sand) including groutting the jointing with white cement and matching pigment etc complete size tiles 60x60cm |
| 16 | Supplying and fixing of anodized alluminium door having 2 mm thick alluminium section excluding coating and an average coating of 20 micron fully glaxed made of alluminium door tube size 83.5x44.65xmm as verticalmember and and 1140x44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminium tubler including coast of material fixtures 4 mm glass handle locks screw necessary including all complete of work |
| 17 | Mildsteel or iron work in heavy sizes such as trusses , builts up gates, door, frames record racks roof gate etc wrought to requriedfrom including drilling holes ,rivetting or welding where necessary and also including supply of steel bolts |
| 18 | Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hook, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead including a coat of approved dteel primer and two coats of approved paint on overlapping of sheets complete0.63mm thick with zinc coating not less than 275gm/m2 |
| 19 | Providing wall putty on new surfacewith approval quality material of Berger/JK/Birla or similar make 2 caots |
| 20 | Distempring two coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of british, shalimar asian paint after throughtly brushing the surface free from mortar droppings and other froeign matter and also including preparing the surface even and sand prepared smooth including cost of all materials. (Chap-15649) |
| 21 | Painting two coat over priming coat new steel and other metal surface after paint including preparing the surface by throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steen/wood scrappers sand paparing and knotting including coat of all and supplyof all material ,labour and T&P etc.required for proper completion of work (Superior quality). Chap-15New item 1a+2+3(iii) |
| 22 | Painting two coat over priming coat new steel and other metal surface after paint including preparing the surface by throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steen/wood scrappers sand paparing and knotting including coat of all and supplyof all material ,labour and T&P etc.required for proper completion of work (Superior quality). Chap-15New item 1a+2+3(iii) |
| 23 | Providing and fixing of ACP sheet orclading work including writing letter including supply of all meterials,labour and T&P etc.reuired for proper complete of work. |
| 24 | ADD Internal & External Electric fitting @4% for office building |
| 25 | ADD Internal & External Sanitory fitting @2% for office building |
| 26 | ADD or Less Say Amount |
