Tender For Construction Of Acr At Enayetnagar Mi High Madrasah (Hs).; 1 Earth work in excavation for foundation trenches in all sorts of soil including removing spreading of staking the spoils within a lead of 75m as directed including trimming the side of trenches leveling, dressingand ramming the button, bailing 2 Earth Work in filling of foundation trenches of plinth with good earth in layers not exceeding 15cmm including watering ramming etc.layer by layer complete (payment to be made on the basis of measurement of finished quantity work). 3 Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand. 5 Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor, (A) [Pakur Variety]...1:3:6 6 25mm thick Damp proof course with stone chips ( 1:1.5:3 ) double chequered with admixture of water proofing compound (approved quality @ 2% by weight of cement content). 7 Ordinary Cement concrete (M-20) 1:1.5:3 with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In ground floor as per relevant IS codes. 8 Ordinary Cement concrete (M-20) 1:1.5:3 with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In 1st floor as per relevant IS codes. 9 Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting ground floor. 10 Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting 1st floor. 11 Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction(i) Tor steel/Mild steel. a) For works in foundation, basement and upto roof of ground floor/ upto 4 m 12 Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction(i) Tor steel/Mild steel. a) For works in foundation, basement and upto roof of 1st floor. 13 Brick work with 1st class bricks in cement morter (6:1) In foundation 14 Brick work with 1st class bricks in cement morter (6:1) in Superstructure 1st floor 15 125mm thick brick work in cement mortar (4:1) in ground floor 16 125mm thick brick work in cement mortar (4:1) in 1st floor 17 Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr)(a) 20mm thick plaster. (i) With (6:1) cement morter. 18 Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (1st flr)(a) 20mm thick plaster. (i) With (6:1) cement morter. 19 Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr)(b)15 mm thick plaster 4:1 20 Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (1st flr)(b)15 mm thick plaster 4:1 21 Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (ii) With (4:1) cement morter, (c) 10mm thick plaster. 22 Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (1st flr) (ii) With (4:1) cement morter, (c) 10mm thick plaster. 23 Artificial stone in floor, dado, staircase dtc woth cement concrete(4:2:1) with stone chips, laid in panels as directed, with topping made with oridinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg./ sqm all complete including all materials and labour. 24 Artificial stone in floor, dado, staircase dtc woth cement concrete(4:2:1) with stone chips, laid in panels as directed, with topping made with oridinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg./ sqm all complete including all materials and labour. i) 35mm thick, 1st floor 25 M.S. or W.I. Ornamental grill of approved design joints contiously welded with M.S., W.I. Flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i)Grill weighing above 10Kg/sq.m. and upto 16 Kg/sq.m. 26 Wood work in door and window frames fitted and fixed complete, including a protective coat of painting at the contact surface of the frame. (a) Sal, Siliguri. 27 Panel shutter of door and window, as per design (each panel consisting of shingle planks without joints) including fittings and fixing the same inposition but excluding the cost of hinge and other fittings. 28 Supplying, fitting and fixing M.S. clamp for door and window frame made of flat bar, and bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per design. (i) 40mm x 6mm- 200 mm long. 29 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100 mm x 75 mmx 3.50 mm 30 Iron socket bolt of approved quality fitted and fixed complete. 31 Iron hasp bolt of approved quality fitted & fixed complete… 32 Anodised alluminium D-type with continuous base plate hexagonal/round base .. Etc. 150 mm x 10 mm 33 Supplying, fitting and fixing hinge cleat Sal Malayasian 34 Supplying, fitting and fixing Buffer block Sal Malayasian 35 Supplying 1.5mm thk. M.S sheet as per design including cost of all labour and materils… 36 Ordinary grating bars made of round or square M.S. rods fitted & fixed in holes of window frames etc. complete. 37 Supplying, fitting and fixing UPVC Pipe110 mm with all necessary clamps nails including making holes in walls. 38 Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc.(a)On steel window 39 Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc.(b)On panelled door 40 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary.With other than hi-gloss of approved quality (i) Two coats ( with any shade except white)(a) On timber or Plaster surface . 41 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary.With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (b) On Steel or other metal surface . 42 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification)… 43 Supplying and fixing double-door (2+4) way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. 1 no 40 Amp MCB isolater and 4 Nos 6-16 Amp MCB(Legrand/Havells/Simens) inter connection with suitable size of copper wire and neutral link & provision for earthing attachmen 44 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]i)Average run 6 mtr 45 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] i) On board 46 Supply &fixing 250 volt Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc 47 Supply &fixing 250 volt 1200 mm(48”) A.C ceiling fan (Decorative)complete With fan blade canopy ctc.and connection by necessary wire. (make-crompton/orient ) 48 Supply &fixing 250 volt 4’ long single box type tube light fittings Complete with electronics ballast/chock and( make-philips –Cat No –TMC 501/136 EBE)with 1no 40 watt tube light fixing on Wall. 49 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. 1 Set 1369.00 Set 1369.00 long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level . 50 Supply & Fixing250 Volt 16 Amp SPN Sheet Steel Main Switch (Havells/standard Make Rewirwable type) on Flat IronFrame/ 1 No 600.00 Set 600.00 Angle Iron Frame on wall 51 MS strucral works with hollow section including cutting to requisite shape and size including welding etc. with vertical post at 65mmx45mm 52 Supply fitting fixing Zn-Al alloy coating of 150 gm. Per sqm. Steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approvedmake. 53 Supplying, fitting and fixing Name Plate. 54 Add GST,as applicable (CGST+SGST)@ 18% 55 Labour welfare cess @ 1%
