Tender For Renovation/Upgradation Of Radiation Biology Lab And Other Miscellaneous Works At Iuac.; 1 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 150 metres lead: Thickness above 10 mm up to 25 mm Sqm 6.00 2 Removing/Dismantling Existing PVC flooring including removing of binding material in floors laid with gum/ fevicol /any other binding material including cleaning of the surface to receive new flooring, disposing of the debris outside campus, stacking of useful material within 150 Rmt lead etc. complete as directed by Engineer-in-Charge. Sqm 70.00 3 Dismantling & demolishing of wall /floor tile (thickness varies from 5 mm to 10 mm) including stacking same within 250-meter lead within campus, including disposal of malba, created due to above work complete as directed by IUAC engineer. Note: The bidder may see the exact and actual scope of work on site before quoting his rate. Nothing shall be payable extra beyond of scope to the contractor for extra difficulties on site. Sqm 6.00 4 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 150 meters lead as directed by Engineer-in-charge Sqm 20.00 5 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Sqm 180.00 6 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) Sqm 100.00 7 6 mm cement plaster of mix: 1:3 (1 cement: 3 fine sand) Sqm 20.00 8 Providing and fixing Granite stone slab colour black, Cherry/Ruby red, 18 mm thick gang saw cut, mirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including making chase in brick wall , rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels as per Engineer-in-Charge. Sqm 8.00 9 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 5.00 10 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.00 11 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multichambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.: Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Sqm 15.00 12 Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.: Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Sqm 2.50 13 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Cum 1.00 12 14 Providing & Fixing ISI marked 18mm thick block board with commercial ply veneering on both side including edge bending tape including ISI marked nickel plated bright finished M.S. hinges with necessary screws, with frame of 1st class hard wood. Sqm 35.00 15 Providing & Fixing 6mm thick ply wood, exterior grade (Grade I Type II), with necessary screws complete for making partition on backside of almirah. Sqm 2.00 16 Providing and fixing stainless steel soft closing spring hinges at 0-degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. Each 40.00 17 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge Each Set 10.00 18 Providing and fixing ISI marked, IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete: 75x60x3.10 mm Each 20.00 19 Providing and fixing bright /matt finished Stainless Steel handles of 100 mm size, of approved quality & make with necessary screws etc all complete. Each 18.00 20 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type Each 18.00 21 Providing and fixing PVC partitions with hollow PVC panels and M.S. tubular frames as per specification given and below given specification including 2 coats of enamel paint on M.S. tubes over one coat of primer.: PVC partitions shall be with hollow panels of size 78mm x 20mm. The partition frame will be made of electric resistant welded semi bright hollow steel tubes of 50mm x 25mm of 1.02mm wall thickness with tolerance according to I.S. 4923 – 1968 and the four corners having radii 2.44mm to 4.88mm. The vertical steel tube members, duly welded to the horizontal members shall be placed between 1000mm to 1200mm apart, and not more than 2 steel tubes will be used at any place for making a right angle or cross junction. The entire partition frame will be primed and painted with synthetic enamel paint. The infill inside the frame will be provided either entire PVC panels placed horizontally as per the colour choice or partly with PVC panels and partly with 4mm sheet glass held in position by means of PVC angles 12mm x 20mm screwed to the steel frame on outer side and with PVC beading on inner side screwed to the steel frame by means of (No 6), self-tapping steel screws placed at suitable intervals. Sqm 15.00 13 22 Providing and fixing PVC doors with hollow PVC panels & M.S. tubular frame as per specifications given and drg. including 2 coats of enamel paint on M.S. tubes over one coat of primer.: PVC Door: PVC door, single or double leaf with hollow panels of size 78mmx20mm. The door shutter frame will be made of electric resistant welded semi – bright steel tubes of 1.02mm wall thickness with tolerance according to I.S. 4923 – 1968. M.S. Box of 150mm x 40mm of 18-gauge sheet will be fixed in the steel frame to act as a lock rail to house the mortise lock. The door will be held in position by means of 3 MS hinges per shutter. The steel frame of shutter will be filled with PVC panels (or partly glazed) which will be held in position on the outer side with PVC angles 12mm x 20mm screwed to the frame & M.S. box and on the inner side with PVC beading screwed to the frame work with (No. 6) self-tapping steel screws fixed at suitable intervals. Sqm 2.50 23 Providing and laying Epoxy floor coating to flooring and skirting surface in lab area, as per below mentioned items: (i) Chemical cleaning of the surfaces with Chemistic Florklin Chemical Floor Cleaner (or equivalent product of approved makes) mixed with water allowing 15-20 minutes for reaction time, then rinsing the area thoroughly and allowing to dry. (ii) Cleaning the existing glass strips, joints and existing damaged concrete floor holes, patches etc. with wire brushes of dust and loose material and repairing/ applying the same with Epoxy putty (of approved makes) mixed with silica sand and making it smooth and even to take the epoxy floor coating. (iii) Grinding with hand grinding machine to clean the existing cement concrete flooring and removing any loose material /oil, grease stains and dust particle and applying one coat of Epoxy primer (of approved makes) on the prepared surface. (iv) Applying two coats of dust proof solvent free epoxy floor coating/screed in average 2 mm (1 mm + 1 mm) thickness with Chemisol EP PLUS-800 (High Built Epoxy Flooring) (of equivalent product of approved make) over the primed surface of approved colour to make the surface dust proof, water proof, chemical resistance and Abrasion resistance. Note: Epoxy colour theme will be decided in consultation with IUAC. No extra amount will be paid for using 2 or 3 colors at designated locations. Making yellow lines at designated places will be included at no extra cost. Sqm 110.00 24 P/F White vitreous China laboratory sink, minimum size 600x450x200 mm complete as per direction of Engineer In charge Each 1.00 25 Providing and fixing PTMT Waste Coupling (31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms) for wash basin and sink, of approved quality and colour Each 1.00 26 Semi Rigid PVC waste pipe for sink and wash basin: 32 mm dia with length not less than 700 mm i/c PVC waste fittings Each 1.00 27 P&F CP swan neck Pillar cock (Parry ware Catalogue, Ease series No T4402A1 or similar item of Jaquar, Cera and Hindustan) including supply, fixing of approved quality complete Each 1.00 14 28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes Rmtr 5.00 29 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre Sqm 150.00 30 Wall painting with premium acrylic emulsion paint (Two coats) of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Sqm 350.00 31 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work Sqm 300.00 32 French spirit polishing: One or more coats on old work Sqm 150.00 33 Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 200.00 34 Providing and fixing required Stainless-Steel Fitting (Coupling/Socket For 28 mm outer dia pipe) of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Each 1.00 35 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of blockboard construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 12.00 36 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Rmtr 30.00 37 Extra for Providing and fixing flush doors with decorative veneering, minimum 1 mm thick instead of non-decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) : On one side only Sqm 24.00 38 Providing and fixing panic bar/latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Each 2.00 15 39 Providing and fixing approved brand and manufacture SS304 Lever Handle D-type fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. Each 4.00 40 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc complete as per direction of Engineer- incharge. Each 3.00 41 Providing and fixing approved brand and manufacture SS304 grade Tower bolt 250 mm long with 10mm Dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. Each 8.00 42 Extra for providing vision panel not exceeding 0.2 sqm in all type of flush doors (cost of glass included) (overall area of door shutter to be measured): Rectangular or square Sqm 9.00 43 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Sqm 9.00 Electrical Works 44 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 15.00 (b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 30.00 45 Supplying and fixing following size/ Modules, GI box along with Modular base & cover plate for modular switches in recess etc. as required Nos 5.00 (a) 3 Module (100mmX75mm) Nos 13.00 (b) 6 Module (200mmX150mm) Nos 8.00 46 Supplying and fixing following Modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required (a) 5/6 A switch Nos 4.00 (b) 15/16 switch Nos 25.00 c) 3 pin 5/6 A socket outlet Nos 4.00 (d) 6 pin 15/16 A socket outlet Nos 25.00 47 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required (a) 25 mm Metre 45.00
