Vidhayak Niwas 2 Naya Darulshafa stith residence no 125/126B, complete renovation of both the bathrooms, replacing the old GI and CI line and laying CPVC line, replacing damaged fittings in the bathrooms and bathrooms, replacing the damaged and broken tiles and kitchen top in the kitchen and replacing them, replacing the damaged table grills and mirrors of the entire residence, replacing damaged doors and other unnecessary civil related work. - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1 2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (D.A.R No-15.56) 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Lime mortar. D.A.R No-15.7.3 4 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below. D.A.R No-15.12.1 5 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Windows Chowkhats. (DAR No- 14.2.2) 6 Brick work with common burnt clay (non modular) brick of class-150 in superstructue above plinth level up to floor V level in all shapes and sizes in. Cement mortar 1:4 ( 1 cement 4 coarse sand) (DAR No- 6.4.1) 7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. D.A.R No- 18.8.3 8 Providing and fixing Clorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DAR No- 18.8.2 9 Providing and fixing C.P. brass stop cock (concealed) of standard design and ofL&K make 15 mm nominal bore. 10 Providing and fixing of CPVC ball valve of 20mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 11 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia. 12 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge, 63 mm dia. 13 Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 14 Providing and fixing of PVC T of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 15 Providing and fixing ofPVC Nahani Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 16 Providing and fixing ofPVC P Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 17 Providing and fixing ofPVC Elbow of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 18 Providing and fixing ofPVC Socket of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 19 Providing and fixing ofPVC Door T of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 20 12 mm cement plaster of mix: 1:4 ( 1 cement 4 coarse sand) (DAR No- 13.4.1) 21 Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.A.R No- 11.40) 22 Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm 23 Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal Sepia, Size, 565x450mm, Cat No- C8872 with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work. 24 Providing and fixing white vitreous china Single Piece water closet Perryware make Camel (C8856 (S-220) size of 645x340x680mm, with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ). 25 Providing and fixing Cera make white vitreous china Anglo Indian type water closet (UNIVERSAL 570x460x380mm with S trap) with, C.P. brass angle valve, Cera make PVC cistern complete with fittings, PVC connection pipe 15mm dia 450mm long including flush pipe, with manually controlled device (handle lever), confirming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. including supply of all materials, labour and T&P etc for the proper completion of the work includingremoval of old pan etc. if so required. 26 Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete. 27 Providing and fixing C.P. brass wall mixture with tele phonic shower 3 in 1 (L&K make code 0457 ) or Equivalentquality. 28 Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work. 29 Providing and fixing C.P. brass angle valve l&Kfor basin mixer and geyser points of approved quality 15 mm nominal bore. 30 Providing and fixing of glass shelf 22 Acrylic make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work. 31 Providing and fixing of glass corner Acrylic make, including supply of all material labour T&P required for proper completion of the work. 32 Providing and fixing C.P. brass OVER HEADshower with arm heavy qualityL&K 0668) with 15mm inlet:100 mm diameter 33 Providing and fixing C.P. Brass Two way angle valve 15 mm dia( L &K 0327 make) with wall flange including supply of all material, labour T&P etc. complete. 34 Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete. 35 Providing and fixing CPtowel Rod OF L&K Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete 36 Providing and fixing CPtowelring L & K or equivelent fittings arrangement of approved quality. 37 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.A.R No-17.31) 38 Providing and fixing CP Brass Extention pieces 15mm dia nickel plated for fixing of brass fittings. 39 Providing and fixing C.P. Soap Dish l&k make including supply of all material , labour T&P etc. complete. 40 Supply and fixingof steel kitchen sink 610X510X200 mm without drain board, with C.P.jali, P.V.C. waste pipe, bracket, including supply of allmaterial, labour, T&P etc. for proper completion of work. 41 Supply and Fixing C.P. brass bib cock 15mm. dia. Long body L&K 0047 including supply of all materials, labour, T&P etc. required for proper completion of the work. 42 providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DAR No-4.2.2 43 Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. DAR No- 5.22A.6 44 Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen platforms, vandy counters. Window sills facias and similar locations of required size, approved shade colour and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, Area of slab over 0.50 sqm DAR. No- 8.2.2.2 45 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, rallings, brackets, gates and similar works. DAR No- 10.25.2 46 Providing and fixing of ISI mark Steel almirah shutters of approved brand including supply of all materials, labour T&P etc,. Required for proper complition of the work, as per directed by Engineer-in-charge. 47 Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work. 48 Supply and Fixing of Stainless Steel Curtain rod including fancy knob and brackets including supply of all material, labour, T&P etc. required for proper completion of the work. 49 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.A.R No- 15.40
