|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 2 | S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 3 | S&FPre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 4 | M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290.(Gde-E-165) complete all as specified and as directed. |
| 5 | Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 6 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm, complete all as specified and as directed. |
| 7 | S&FGypsum Board 10mm thick decorative type in ceiling fixed with screw as per manufacturers instructions, complete all as specified and as directed. |
| 8 | Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed. |
| 9 | Taking down Chowkats or frames not exceeding 1.5 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 10 | Taking down Shutters of any description not exceeding 1 sq.m each, complete all as specified and as directed. |
| 11 | Taking down Shutters of any description exceeding 1 sq. m and not exceeding 2 sq. m each, complete all as specified and as directed. |
| 12 | M&L for 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 13 | S&F 30 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed. |
| 14 | S&F 30mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed. |
| 15 | S&Fstainless steel Butt hinges 75mm size, medium weight, complete all as specified and directed. |
| 16 | S&F extrudedAluminium alloy handles 100mm size, cast type, anodised complete all as specified and directed. |
| 17 | S&FAluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and directed. |
| 18 | S&Fstainless steel Butt hinges 100mm size, medium weight , complete all as specified and as directed. |
| 19 | S&F extrudedAluminium alloy handles 150mm size, cast type, anodised, complete all as specified and as directed. |
| 20 | S&FAluminium, anodised, barrel tower bolts 150mm long of extruded section, complete all as specified and as directed. |
| 21 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed. |
| 22 | S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate , complete all as specified and as directed. |
| 23 | S & F sheet glass, pin head type and glazing with oil putty in squares3 mm thick, not.exceeding 0.5 Sqm in each panel as in ventilatorall as specified and directed. |
| 24 | S&FGalvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples, complete all as specified and as directed. |
| 25 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples, complete all as specified and as directed. |
| 26 | S&F 20mm bore mild steel cromium plated curtain rods, suitable for door/windows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, brackets and fixed to wall complete all as specified and directed. |
| 27 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed. |
| 28 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concretesurfaces with water proofing compound @2% by weight of cement and finished surface even and smooth without using extra cement including necessary scaffolding etc. (WPC paid seprately), complete all as specified and as directed. |
| 29 | Supply only WPC, complete all as specified and as directed. |
| 30 | M&L for 15mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement, complete all as specified and as directed. |
| 31 | M&L for Applying two coats of Distemper oil emulsion, white or tinted over and incl 2 mm thick wall care putty on new wall surface including preparation of surface, complete all as specified and as directed. |
| 32 | M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper over and incl 2mm thick birla white putty including preparation of surface complete all as specified and directed. |
| 33 | M&L for complete removal of existing treatment on ceiling and applying two coat of oil bound distemper over 2mm thick birla white putty including preparation of surface complete all as specified and directed. |
| 34 | M&L for complete removal of existing treatment and applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of old decorated walls etc , properly making of v shape crakes and filling of all crakes with crake sealof walls complete all as specified and directed. |
| 35 | M&L for applying two coat of exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surface of new plastered surface of walls complete all as specified and directed, complete all as specified and as directed. |
| 36 | M&L for Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface, complete all as specified and as directed. |
| 37 | M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 38 | M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer, complete all as specified and as directed. |
| 39 | M&L for Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface, complete all as specified and as directed. |
| 40 | Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises as specified and directed. |
| 41 | M&L for 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate, as in sub floor, complete all as specified and as directed. |
| 42 | M&L for Coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) as specified and directed. |
| 43 | Description all as per item No 42 above but as in skirting over 10 mm thick rendering/ backing coat in CM (1:4), complete all as specified and as directed. |
| 44 | M&L for coloured Glazed ceramic tiles in vertical surfaces350x250mmx7mm or 450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster/ backing in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 45 | S&F for Rotational moulded polyethylene 500Ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified and directed |
| 46 | S&F for Rotational moulded polyethylene 1000Ltr water storage tanks(cylindrical vertical with closed top)hoisted and fixed in position including dismantling all as specified and directed |
| 47 | S & F Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe & fixed. (min weight 15mm-142 gms) all as specified and directed. |
| 48 | S & F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 49 | Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 50 | Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 51 | M&L Lagging to pipes used in internal water supply or plumbing all round with, 40mm thick bonded mineral wool pre-formed mineral wool pre-formed `SNAP ON\" pipe secions of density 144 Kg/cum conforming to IS 9842 on pipe of internal dia 20 mm, complete all as specified and as directed. |
| 52 | M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 53 | M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 54 | Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthcomplete all as specified and as directed. |
| 55 | S & F in repair 15mm bib tap chromium platedwith crutch or butterfly handle screwed for iron pipecomplete all as specified and directed. |
| 56 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles, complete all as specified and as directed. |
| 57 | M&L forbrick work with sub class \"B\" bricks straight or curved on plan exceeding 6 M mean radius build in CM (1:6), complete all as specified and as directed. |
| 58 | Demolition ofconcrete in ground floors & pavings not exceeding 15 cm thickness (below or above ground level)(unreinforced), complete all as specified and as directed. |
| 59 | M&Lfor 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing, plinth protectionfinishing the surface even and smooth, incl filling of joint, complete all as specified and as directed. |
| 60 | M&L for 25mm thick Cement concrete 1:2:4 type B-0 ((using 12.5 mm graded stone aggregate) in leveling course, benching etc, finished even & rough to receive cement mortar screed bed, complete all as specified and as directed. |
| 61 | Demolition of Reinforced cement cncrete in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 62 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed. |
| 63 | M&L RCC type A1 (1:1½ :3) using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 64 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality, complete all as specified and as directed. |
| 65 | S&F 5 mm thick PVC sheet fillet of width 35mm for all paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 66 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solven cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 67 | Taking down Chowkats or frames exceeding 1.5 sqm but notexceeding 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 68 | S&F Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and as directed. |
| 69 | M&L for Precast cement concrete hollow block masonry exceeding 10 cm in width set in cement mortar 1:6, type 1:3:6 using (20 mm graded aggregate) as per IS 383 and setting in mortar, complete all as specified and as directed. |
| 70 | M&L for Precast cement concrete hollow block masonry 10 cm thickset in cement mortar 1:4 type 1:3:6 using (20 mm graded aggregate) as per IS 383 and setting in mortar complete |
| 71 | M&L for Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 72 | M&L for 100 mm thick plain cement concrete type D2 1:4:8 in sub floors and pavings,complete all as specified and as directed. |
| 73 | S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box & crank handle Thickness of laths 1.25 mm, complete all as specified and as directed. |
| 74 | S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 75 | S & F ball bearing for rolling shutters complete all as specified and directed. |
| 76 | Demolition of Stone slabs and tile laid beddedand pointed in any mortar of any description or thickness in floors, aprons etc all specified and directed |
| 77 | M&L Machine cut kota stone slab flooring 18-22mm thick over 20mm thick screed in CM(1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing, complete all as specified and as directed. |
| 78 | M&L Kota stone slab 12-15mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing, complete all as specified and as directed. |
| 79 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out as inany type of soil, complete all as specified and directed. |
| 80 | M&L cement concrete work in pavement / hard - standing of flexural strength 40 Kg per sqm cm in field using minimum 400 kg of cement per cubic metre ,thickness of concrete 25cm or lesscomplete all as specified and directed.Note: Mix design shall be carried out from the apporved lab and cost of mix design shall be borne by the contractor. |
| 81 | M&L Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ 200mm thickness of slabcomplete all as specified and directed. |
| 82 | M & L Providing, cement concrete (1:2:4)type B-1(using20 mm graded agg)in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 83 | Removal of surplus soil not exceeding 50m and depositing where dirtected at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 84 | Taking down copper/alluminium point wiring (light,fan,socket or power) complete by removing all switch, socket,ceilling rose,pendent etc., excluding light fitting and making good the distributed surfaces as existing, complete all as specified and as directed. |
| 85 | Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface, complete all as specified and as directed. |
| 86 | Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through & including PVC Conduit, concealed wiring in wall/ceiling with miled steel modular sunken box & bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaustpoint/ bell point controlled by one switch 5Amps one way, using the cable of (1.5 sqmm for phase and neutral & 1.5 sqmm earthing) Note:- (a) wiring shall be done by using colur cording (b) Earth wire shall be of green colour, complete all as specified and as directed. |
| 87 | Descrition all as per item No 86 above but 5Amp socket outlet on same board, complete all as specified and as directed. |
| 88 | Descrition all as per item No 86 above but 5Amp socket outlet on indipendant board, complete all as specified and as directed. |
| 89 | Descrition all as per item No 86 above but for one socket outlet 15 Amps on indipendant board using cable 4 sqmm (for phase,neutral and earthing), complete all as specified and as directed. |
| 90 | Descrition all as per item No 86 above for one socket outlet 15 Amps on independent board using cable (2.5 Sqmm for Phase & neutral and 2.5 Sqmm for earthing), complete all as specified and as directed. |
| 91 | S&F Sheet metal enclosure single door for DBs when MCBs to be used SPN-8 way with 200 Amp rated bus bar complete all as specified and directed |
| 92 | S&F sheet metal enclosure single door for DBs when MCCBs to be used TPN-4 way,415 volts with 200 Amp rated bus bar IP 43/54, IS-8623 complete all as specified and directed |
| 93 | Supply and fixing 415V 10KA \"C\" curve miniature circuit breaker (MCB) of following poles & current carrying capacity in the DB complete with connection testing and commissioning of rating TPN 40 to 100 AMP, complete all as specified and as directed. |
| 94 | S&F for MCB SPN 40 Amps, 240 V, complete all as specified and as directed. |
| 95 | S&F for MCB SP 6 to 32 Amps 10 KA 240 V, complete all as specified and as directed. |
| 96 | S&F for switch piano flush type 5Amps one way, complete all as specified and as directed. |
| 97 | S&F switch socket combination outlet 2 in 1, 3 pin, 5 A, 230V flush type, complete all as specified and as directed. |
| 98 | S&Fsocket outlet 2 in 1, 3 pin, 5 Amp, 230 volt flush type all as specified and directed by Engr-in-charge. |
| 99 | S&F switch socket combination outlet 5/15 Amps 5 in one flush type complete in independant board, complete all as specified and as directed. |
| 100 | S&F ceiling rose 3 terminal size 50x 65 mm surface type, complete all as specified and as directed. |
| 101 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and as directed. |
| 102 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed. |
| 103 | Sub main wiring with two runs of single core PVC insulated (FRLS-H) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 6 sqmm single core copper conductor multistrandedPVC insulated (FRLS-H) unsheathed cableas earth wire continuity conductorcomplete all as specified and directed.Note : (i) Two run of cable6 sqmm and one run of 6 sqmm earth wire shall be measured and paid as one unit only.(ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour |
| 104 | Description all as per item No 103 above but, using cable 10 sqmm as main, neutral and earth, complete all as specified and as directed. |
| 105 | S&F 1x20 W LED 6000K (4 ft) decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp, complete all as specified and as directed. |
| 106 | Notes :- An amount of ` 59,386.00 on account of Credit Schedule for Schedule \"A\" Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum |
