Tender For Repairing Of Anthropology Department. (Sh : Roof Treatment, Repairing Of Lab. And Repairing Of Audio Visual Lab).; 1 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet 2 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 3 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80mm thick with zinc coating not less than 275gm/m2 4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m2 5 Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheetgutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m2 6 Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : Local best quality Tolhao wood. 7 Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : Local best quality Uningthou wood 8 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Local best quality Tolhao wood.35 mm thick shutters 9 Providing & fixing 38 mm local best quality Uningthou plain panelling with skirting chair rails & cornice with necessary screws, priming coat on unexposed surface surface etc. 10 Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): Natural colour insulating board. 12 mm thick 11 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre 12 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitableshade withordinary paint of approved brand and manufacture. 13 Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. 14 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer:- 15 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. 16 Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. 110mm dia 17 Providing and lining P-Form of superior quality on wall with sofa nail, necessary screws, wooden plugs, fixing the joints of P-Form with synthetic glue to ensure air tight/damp proof and to ensure receipt of wooden beading over it (frame work to be paid seperately) 18 Providing and lining 50mm thick thormo cool of superior quality fixing on P-From against wall surface with synthetic etc complete. 19 Providing and filling with coconut coir in gaps provided for acosting fill as directed by engineer in charge. 20 Providing and fixing15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceilingtiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of mainT runner suitably placed at joints to get required length and of size 24 x 38 mm made from o.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross T of size 24 x 28 mm made from o.33 mm thick (minimum) sheet, 1200 mm long spaced between mainT at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross T of size 24 x 28 mm made from o.33 mm thick (minimum) sheet to be interlocked at the middle of the 1200 x 600 mm panel to form grid of size 600 x 600 mm, resting on periphery walls, partitions on a Perimeter wall angle pre-coated steel of size (24 x 24 s 3000 mm made of 0.40 mm thick .(minimum) sheet with the help of rawl plugs at 450 mm centre towith 25mm long dry wall screws @@230mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including cutting/ making opening for services likediffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 25 x 35 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along mainT, bottom exposed with 24 mm of all T sectiond shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawing and as directed by Engineer-in-Charge. 21 Providing and laying jute carpet of approved quality stitching the joints as directed by the engineer in charge. 22 Varnishing with varnish of approved brand and manufacture: Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. 23 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coat 24 Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4 coarse sand)
