Tender For Construction Of Baraat Ghar In Village Daravanagar. (Mla-Alampur.Zafrabad) - 1 Boq 2 Excavation In Foundation In Ordinary Soil, Loam, Clay Or Sand Including Lift Upto 1.5M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Ea, alampur-Uttar Pradesh

Tender For Construction Of Baraat Ghar In Village Daravanagar. (Mla-Alampur.Zafrabad) - 1 BOQ 2 Excavation in foundation in ordinary soil, loam, clay or sand including lift upto 1.5m & lead upto 30m including filling watering & ramming of excavated earth into the space between the building & the siides of foundation trenches or into the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches SI. No. 251 3 Providing and Injefting of Chamical emulsion for pree constructionantitermite in complete in all chep.8 item NO-1 4 Concrete with 4 cm gauge brick ballast, fine sand and cement in proportion of 8:4:1 in foundation including supply of all materials labour and T& P etc required for proper completion of the work.( S.I.No. 275) 5 First class Brickwork in 1:6 cement and coarse sand mortar in foundation & plinth includiiing supply of all materials labour T & P etc. required for proper completion of work as per SI.No. 303 6 First class Brickwork in 1:4 cement and coarse sand mortar in foundation & plinth includiiing supply of all materials labour T & P etc. required for proper completion of work as per SI.No. 305 7 First class Brickwork in 1:6 cement and coarse sand mortar in Super Structureincluding supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 303+3.9+310 8 First class Brickwork in 1:4 cement and coarse sand mortar in Super Structureincluding supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 305+309+310(a) 9 First class Brickwork in 1:4 cement and coarse sand mortar in Super Structureincluding supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 305+309+310 10 12 mm cement plater in 1:3 with cement amd coarse sand mortar in single coat on fair side of single or half brick wall for interior plastering upto 2 level i/c internal rounded angles champers and or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. As per SI.NO.583 11 12 mm cement plater in 1:6 with cement amd coarse sand mortar in single coat on fair side of single or half brick wall for interior plastering upto 2 level i/c internal rounded angles champers and or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. As per SI.NO.586 12 Extra for rough surface plaster i/c all complete SI. No. 596 13 RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in P/L beam SI.No. 283(a) 14 RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in Slab SI.No. 284(a) 15 RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3but in verandha beam SI.No. 285 16 RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3but in T beam SI.No. 288 17 Mild Steel or iron work in plane work such as reinforced concrete for reinforced brickwork (when not included in an over all rates) wrought to required shape as necessary includeing bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks SI.No 504 18 Earth Work in filling in ordinary soil with 1.50 mt, & 30.00 mt lead including lab T&P all complete with 3.0 km cartege As per SI.No. 253 C 19 Sand filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 km from the site of work and including watering, dressing etc including all mateials, labs T&P complete as per SI.No. 255 20 2.5 cm thick plain C.C. floor 1:2:4 with cement c/sand and 20 mm gauge stone ballast in panel finished with 3mm floating coat of neat cement over 8 cm base conc. 1:4:8 , 40 mm S/grits including all complete SI.No. 601 21 2.5 cm thick plain cc floor 1:2:4 with cement c/sand and 20 mm gauge stone ballast including all complete SI.No. 601(a) 22 S/F of 3.15 mm thick and 2.2 cm depth glass strips joints of floor level including all complete SI.No 631a 23 Cement Concrete with 2cm gauge approved stone ballast, coarse sand & cement in proportion of 4:2:1 including supply of all materials labour T&P comp SI.No. 279(I) Hold and fast 24 20 mm Thick plaster in 1:2 cemen coarse sand mortar in dado skirting including all material lab T&P comp As per SI.No 581 25 Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.dsr 13.26 26 P/Lof Vctrified floor tiels in different sizes (thickness to be specified by the manufacturer ) with water absorptions less than 0.8% and conforming to IS:15622 of approved make in all colours and shades ,laid on 20m.m thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.,complete As per S.NO. Chp.14 D.S.R 11.41 27 S/F 6mm china white glazed tile in flooring or skirting dado with 1:3 cement & coarse sand mortar finished with white cement slurry joining and polishing complete all materiall T&P as per SI.No. 628 28 supply of brick balls in filling of soak pit including labour T&P all compChapter 20 New Item -7 29 Mild steel or iron work of small size and section such as fabrication of door and window frame including cost of hinges as per SI.No. 502(b) 30 Mild steel or iron work of small size and section such as fabrication grill in door, window, ventilator including cost of hinges as per SI.No. 502-C 31 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.dsr N010.5.1 32 Mild steel or iron such as in heavy size trusses, builtup gates, door frame incl. all complete as per SI.No 503 33 P/F of fly proof galvanized M.S wire gauge to window and clerestory windwo using galvanized M.S wire as per SI.No. Ch 9 New Item No. 9.51.1 34 S/F of Hexagonal fan box with 1.00 MM Thick sides of fabrication from 16 SWG M.S. Sheet SI.No. 1149 35 Two coat painting over 1 coat primer including lab T&P all comp SI.No. CH 15 New Item 1+2+4(ii) 36 Three coat with oil bound distemper over one coat primer including all complete SI.No. 649+650 37 Finishing of walls withacrylic smooth paint of required shadeover new work include base coat of water proffing cement paint i/c all material ,labour andT&P as per S.I. 13.46.1 38 S/F of 10 cm internal dia A.C. down pipe complete with bends including supply of M.S. Clamp 2.5 cm X 3 mm fixed to wall & 15 cm Long wall Incl. T&P all comp. SI.No 730 39 Engrewing linein the plaster of outer surface vertically and Horizantallyto display the surface(Forming Grooves of uniform size) ncluding all comp SI.No. 598 40 Laying of B.O.E Soiling with SOB Brick Including sand filling lab T&P all comp. SI.no 762(b) 41 12mm thick plaster in 1:5 cement coarse sand mortar including lab T&P all comp. SI.No. 584(1) 42 S/F of Informative road sign of 1.20 X 0.90 mtrs in size made of 18 mm gauge M.S. Sheet with two nos angle iron post 40X40X5 mm and 3.20 m long & 25X5 mm. M.S Flat bracing compl. With coat of painting over 2 primer coat. In base letter writing on board as driected br Er. Incharge also fixing in Proper position comp. at site 43 Electrification WorkWiring point for light 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, inside the conduit using moduler board & moduler switch complete.a) Light Points (131C-187A) 44 b) Fan Points(133C-187A) 45 c) 5 Amp Plug (134C187-C) 46 Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A 250 volt flush type universal modular socket switch on concealed MS box including supply of all material. labour T&P etc. required for proper completion of work. (1139) 47 S/F surface/flush mounting spn distrbution board without mcb item no 1022(a) cate A 48 S&F of 6 Amp to 32 Amp. SPMCB (1002,CAT B) 49 Supply and fixing of electronic fan regulator Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work (1203C) 50 Supply and fixing of LED Tube Light butten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect (1413A CAT AAA) 51 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. (1421 CAT AA) 52 Basic Price for 1200 mm sweep BLOC Ceiling fan i/c all accessories/fittings/ supports etc. DSR 4400 53 Instaling, Testingand commissioning of ceiling fan, including the down roads of standard length with1.5 mm FRLS PVC insulate copper condutor single core cable including and providing fixing phenolic laminated sheet cover on the fan box etc.DSR 1.45 54 Water supply and saintary workSF of PVC Pipe 100mm dia including all complete.Chapter-1 item N0 24 55 SF of PVC bend 100 mm dia including all complete DSR Item N0 56 Providing and placing on tarees polithene water storage tank as per DSR 18.48. 57 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.--Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes DSR 18.8.1 58 20mm nominal dia Pipes DSR 18.8.2 59 PF of white vetreous china Orissa pattern w.c pan of size 580x440 mm & foot rest intrigal type complete of work as per DSR 17.1.1. 60 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 dsr 18.53.1 61 PF of white vetreous china Flat back wash Basin of size 630X450 mm complete of workas per DSR 17.25.1 62 PE Stainless steel a ISI 304 (18/8) kitchen sink as per SI.No. 3983 with CI brackets and stainless steel plug 40mm incl. painting & fitting and brackets cutting and making good the walls Kitchen sink without drain board 470x420 mm bowl depth 178 mm dsr 17.10.2.3 63 PE of CP. hrass bib cock of 15mm dia nominal bore........ including all complete of work as per DSR 18.49 1 64 PF of CP brass long body bib cock of 15mm dia nominal bore........ including all complete of work as per DSR 18.51.1. 65 PEof CP brass Stop cock of 15mm dia nominal bore... including all complew of work as per DSR 18.52.1.

INR 2354 /-

INR 44100.0 /-

INR 22.03 Lakhs /-