Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark–Ii Hand Pumps And Construction Of Platforms At Village Palouta Camp W. No. 11 Of Mc Ramgarh District Samba On Turnkey Basis (Epc), Jammu-Jammu And Kashmir
TDR : 47143601
Tender Notice
BOQ
Expired
Jammu
Jammu And Kashmir
Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark–Ii Hand Pumps And Construction Of Platforms At Village Palouta Camp W. No. 11 Of Mc Ramgarh District Samba On Turnkey Basis (Epc)
Name of Work: Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at Village Palouta Camp W. No. 11 of MC Ramgarh District Samba on Turnkey Basis (EPC) under District Capex Budget 2024-25 (Untied Grants)
Sl. No.
Item Description
1
Deep drilling of bore hole 125 mm dia. as per the Strata encountered as per IS specification by using ODEX method and installation, testing and commissioning of Mark-II hand pump along with additional riser pipes/connecting rods if required. The job also includes construction of cement concrete platform as per site conditions. The job includes extraction of MS casing pipe if any required during the drilling work.
2
Providing of 125 mm dia. M.S.Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class, weight per mtrs = 18.11 kg) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments.
3
Cost of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly
4
Cost of Riser Pipe 32 mm extra additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1241 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector
5
Cost of connecting rod extra additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
