Tender For Up-Gradation Of Canteen At Csir-Iict, Hyderabad.; 1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 4 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) 5 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of all colour and texture except black, Cherry/Ruby red Area of slab over 0.50 sqm 6 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 7 Providing and laying Ceramic glazed anti skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Somany/kajaria/Johnson or equivalent approved make. 8 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Somany/kajaria/Johnson or equivalent approved make. 9 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) 10 Demolishing cement concrete manually/ by mechanical means including disposal of material outside IICT campus to the approved GHMC dumping groundas per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 11 Dismantling tile work in floors and roofs laid in cement mortar including stacking material outside IICT campus to the approved GHMC dumping groundas per direction of Engineer - in - charge. 12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking with inIICT campusas per direction of Engineer - in - charge. 13 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 14 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Modi guard/saint gobain or equivalent approved make 15 Exposing the corroded steel around its full circumferenceand cleaning the same to remove all loose scales and corrosion deposits by hard brush with emery paper or, by any suitable mechanical means as directed by Engineer-in-Charge, so as to get bright conditions and removing the corrosion deposits from pits and imperfections within its surface by compressed air and water at a high pressure and providing and applying one full coat of anti corrosive treatment of epoxy (Nitozinc primer/ Zinc rich primer of FOSROC Product) or any other equivalent approved compound over the cleaned and prepared surface as per manufacturers specifications. 16 Providing and applying a bond coat of Nitobond-EP of FOSROC product to the exposed surfaces of all structural members as per the manufacuturers specifications at all levels as directed by Engineer-in-Charge. 17 Providing and spraying bond coat Nito Bond-SBR of FOSROC Product )for the entire surface to receive the coat prior to application of cement plaster. 18 Providing and applying Brush bond RFX of Fosrac productin two coats as per the manufacture specifications including crack filling where ever required at all levels as directed by Engineer in charge. 19 Providing and fixing of CP bib cock long body make Jaquar Aspire series C.NO;PR-CHR-101107 20 Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:two or more coats on old workincluding removing the old existingpealed off paint(OBD /EMULSION )by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches with interior primer etc. to RCC beamscompleteas directed by Engineer in-charge. Asain make 21 Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade :twocoats on old work as directed by Engineer in-charge. Asain Make 22 Providing and laying PVC Flooring homegeneous 2MM thick cost including preparation of surface uniform before laying for fixing PVC sheet flooring by using the fullAdhesive Pidilite brandfloor fix with thermalwelding the jointsby usingweilding rodsshade Beige ofPoly floor vinyl flooring IS: 3462 or equivalant approved make,color,design will be selected by canteen committee/ Engineer incharge. 23 Providing and laying 3mm Thick PVC sheet with UV coated for vertical coloum with aluminum corner guard 25x25xx3mm thickfixing with fulladhesive fevicol SR, shade marble patteren imported materials with water prooforshade design,patteren. will be selected by canteen committee/ Engineer incharge. (see the below picture) 24 Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. 25 1 x 1.5 sq.mm 26 2 x 1.5 sq.mm 27 3x2.5 sq.mm 28 3x4 sq.mm 29 5x4Sq.mm 30 S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories on Metal Angular frames, pipes with necessary weldings to fix pvc pipe/ surface/recess cutting the wall and making good the same in case of recessed conduit as required. Make: Sudhakar(i) 25mm 31 Supply of single phase, 230 V, 50Hz, 450 mm sweep, 900 RPM Heavy duty exhaust fan complete set as directed by Engineer incharge.Make: Crompton/ Havells/ Almonard 32 Installation of exhaust fan in the existing opening/ MS window/ GI Sheet with necessary mechanical supports including making and Fixing MS flat frame of required size to suit the window Structure/ GI sheet with necessary weldings and grouting if required, making good the damage, connection, testing, commissioning etc. as required and as directed by Engineer Incharge.(i) Upto 450 mm sweeep 33 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes as directed by Engineer incharge. 34 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 35 6 Module (200mmX75mm) 36 12 Module (200mmX150mm) 37 S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required. 38 5/6 A switch 39 15/16 A switch 40 3 pin 5/6 A socket outlet 41 6 pin 15/16 A socket outlet 42 Disconnecting and removing of existing oldDB/ Switchboards and all electrical Gadgets: Disconnecting and removing of Existing Switch boards, MCB Enclosure boxes, Old DB, Light fittings & Exhaust Fans, ceiling fans of all types including existing wiring and transporting all the dismantled materials with out any damage from the site to departmental stores/ debries yardas directed by the Engineer in charge. 43 ITC ceiling fan: Installation, testing and commissioning of ceiling fan, including down rods oflength(upto 3 feet) with all mechanical supports if necessary, connections, paintings etc; should be done as directed by Engineer incharge. 44 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(i) 12 way , Double door 45 Supplying and fixing following way, Verticle type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 46 8 way (4 + 24), Double door 47 12 way (4 + 24), Double door 48 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 49 Supply of poly carbonate 1x18 watts, 4feet, LED Tube light set,along with 1xTLED fixture, LED Tube-1no, complete with all accessories as directed by Incharge Electrical.Cat.no.TMC501P 1xTLED 20W-14# LED tube 18watts, 865, T8Make:Philips 50 Supply of poly carbonate 2x18 watts, 4feet, LED Tube light set,along with 2xTLED fixture, LED Tube-2no, complete with all accessories as directed by Incharge Electrical.Cat.no.TMC501P 2xTLED 20W-14# LED tube 18watts, 865, T8Make:Philips 51 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED Fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required and as directed by Engineer incharge. 52 Supply of 50w smart LED outdoor fixture completely with all accessories as directed by Engineer incharge.cat.no.BVP161 LED43/CW 50W 220-240 V WB GREY INMake:Philips 53 Supply of 100w smart LED outdoor Flood light fixture, 120 Lumen/watt, CRI>70, 5700 K, IP66, Aluminium pressure die cast Housing material, Polycarbonate optical cover material, 4kV inbuilt surge protector completely with all accessories as directed by Engineer incharge.cat.no.BVP282 LED120 CW FG SY5WB 100W PSUMake:Philips 54 Fixing of LED outdoor Flood light fixture on sruface/ MS Angular frames complete with connections including Clamps and all accessories as directed by Engineer incharge. 55 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required. 56 Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required.Make: Legrand 57 Providing of 105mmx50mm DLP PVC trunking with all accessories and joints on the wall /table/Wall panelling as directed by Engineer incharge.Make:Legrand 58 Note: The Contractor has to visit the site before quoting the rates in e-tender.
