Tender For In Siddharthnagar District Construction Work Of Permanent Room And Toilet At Kakrahwa Ssb Check Post - Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out An, siddharthnagar-Uttar Pradesh

Tender For In Siddharthnagar District Construction Work Of Permanent Room And Toilet At Kakrahwa Ssb Check Post - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer in charge. (0.30 m and above) 2 Anti termite treatment in foundations 3 PCC work in foundation with 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size 4 RCC Work in foundations, footings, bases for columns including the cost of centering, shuttering, propping etc with 1:1.5:3 (1 cement : 1.5 coarse sand : graded stone aggregate 20 mm nominal size) 5 Steel used in above RCC work @ 1.5% 6 Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in all shapes and sizes with cement mortar with 1:6 (1 cement : 6 coarse sand) 7 RCC work in plinth beam excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : graded stone aggregate 20 mm nominal size) 8 Steel used in above RCC work @ 1.5% 9 Brick work with common burnt clay (non modular) bricks of class-150 in super structure above plinth level upto floor V level in all shapes and sizes with cement mortar with 1:6 (1 cement : 6 coarse sand) 10 RCC work in columns & beams excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : graded stone aggregate 20 mm nominal size) 11 Steel used in above RCC work @ 1.5% 12 RCC work in Jambs of doors and windows excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : graded stone aggregate 20 mm nominal size) 13 Steel used in above RCC work {2 nos of steel bars (8 mm) been used} 14 RCC work in Slab, sunshades, chhajja etc. excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : graded stone aggregate 20 mm nominal size) 15 Steel used in above RCC work @ 1.0% 16 Earth Filling 17 Sand Filling in Flooring 18 Base Concrete in floor, plateform, ramp & apron with 1:4:8 (1 cement: 4 fine sand: 8 brick ballast) 19 Providing & laying ceramic glazed fllor tiles of size 300x300 mm of 1st quility, of approved make laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement complete 20 12 mm Cement Plaster of mix 1:4 (1 cement : 4 coarse sand) 21 Providing & fixing 1mm thick MS sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junctions & corners, all necessary fittings complete, including supplying & priming coat of approved steel primer, using flats 30x6 mm for diagonal braces and central cross piece.(Weight of Steel 20.40 kg/sqm) 22 Roof Terrecing with mortar 1:3 (1 cement : 3 coarse sand)DPC 23 Finishing Walls with water proof cement paint (2 coats) 24 Painting on Iron work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint including all materials 25 MS Handrail for Ramp

INR 944 /-

INR 130000.0 /-

INR 13 Lakhs /-