|
| 1 | Demolition of reinforced cement concrete in floors, beams, chajjas, landing slab in any position or height and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 2 | Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete complete all as specified and directed. |
| 3 | Taking down cement plaster from old wallsand raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 4 | Taking down cement plaster fromceiling surfaces and racking out joints hacking for key, scrubing down with water etcbuilt in cement mortar complete all as specified and directed. |
| 5 | M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring finished fair and even without using extra cement complete all as specified and directed. |
| 6 | M&Lreinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in slabs supported on wallsand finishing exposed surfaces fair & evenall as specified and directed. |
| 7 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 8 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surfaces complete all as specified and directed. |
| 9 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and directed. |
| 10 | M&L for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the primises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/sqm and providing 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) on sunken slab portion. M&L for applying two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/s Pidilite industries Ltd or equivalent) and followed by a overlay protective rendering 15mm thick in CM (1:3) alongwith liquid water proofing compound of approved make and including filling of brick bats and finishing the top surfaces even and smooth without using extra cement . Sunken slab after prepration as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturer instructions complete all as specified and directed. |
| 11 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and directed. |
| 12 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even using integral water proofing compound all as per manufactures instruction complete all as specified and directed. |
| 13 | M&L for Sadarahalli Stone (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing using 20mm screed bed in CM 1:6 including dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 14 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 15 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 16 | Taking down Chowkhat or framesexceeding 1.5 Sqmbut not exceeding 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 17 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and directed. |
| 19 | S&F 35 mm thick 2nd class hardwood factory madeplain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedboard medium density, wood particle board with commercial face vineers complete all as specified and directed. |
| 20 | S&F 30mm thick flush shutter, solid core construction with block board core and ply wood face panel, commercial type on both side complete all as specified and directed. |
| 21 | S &F2nd class hardwood 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and directed. |
| 22 | Providing & Fixing of UPVC glazed 2 track-2 panel sliding windows made out of multi chambered uPVC sections with TPE gaskets having isolated drainage and reinforced with Galvanized iron profiles through the window. The outer frame having an overall size of 60 x 48 mm with reinforcement of 1mm thickness and sash with overall size of 38x61mm with reinforcement of 1.2 mm thickness, Glazing bead for fixing of glass shall be of size 16 x 19mm. Windows will be provided with 5mm plain float glass, with necessary hardware & single point locking system of flush lock. Wall thickness of frame & sash shall be 2-2.2mm complete all as specified and directed. |
| 23 | Providing & Fixing of UPVC glazed 3 track-2 panel sliding windows with mesh made out of multi chambered uPVC sections with TPE gaskets having isolated drainage and reinforced with Galvanized iron profiles through the window. The outer frame having an overall size of 108 x 48 mm with reinforcement of 1.2mm thickness and sash with overall size of 38 x 61 mm with reinforcement of 1.2 mm thickness mesh sash of overall size 38 x 58mm Fiber mesh reinforced with 1.2 mm of GI. Glazing bead for fixing of glass shall be of size 16 x 19mm and TPV gasket. Windows will be provided with 5mm plain float glass, with necessary hardware & Single point locking system of flush lock. Wall thickness of frame & sash shall be 2-2.2mm complete all as specified and directed. |
| 24 | S&F powder coated any colour(minimum thickness of powder coating 50 micron)anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc and aluminium grills for windows complete all as specified and directed. |
| 25 | S&Fpowder coated any colour(minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 26 | M&L for 19mm thick both side prelaminated PVC moulded shutter including 2mm thick PVC sheet Lipping with EPS lined as in cupboard as specified and directed . |
| 27 | S & F Stainless Steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainles steelwire staples complete all as specified and directed. |
| 28 | S & F 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 29 | S & F 250 mm mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 30 | S&F mild steel 300 mm, long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 31 | Supply & Fixing150 mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 32 | S & F 125 size Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 33 | M & L for mild steel powder coated pelmet rods 25mm outer dia including 2 Nos of brackets 2 Nos of pintals or side brackets as per site requirement complete all as specified and directed. |
| 34 | M&L floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm complete all as specified and directed. |
| 35 | Supply and fix 4.80mm thick plain glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 36 | M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying twocoat of synthetic enamel paint over a coat of pink wood primerall as specified and directed |
| 37 | M&L for prepration of oldsteel surface and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 38 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. |
| 40 | Rendering 5mm thick in CM (1:3) on ceiling on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M&L for Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed in CM 1:6, complete all as specidied and as directed. |
| 42 | M&L for Glazed ceramic tiles invertical surface of size 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc and dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing), removingrubbish off the premises complete all as specified and as directed. |
| 43 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil,returning, filling in and ramming earth or broken rubble mixed with earth ground, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 44 | Supply and fixing MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290, Gde-E-165 complete all as specified and directed. |
| 45 | Supply and fixing of MS fencing posts/struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 46 | Material and labour for Cement Concrete 1:3:6 type C2 (using 40 mm gradedcrushed stone agg as in fdn of posts water troughs and the like including weathering,slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 47 | Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed. |
| 48 | Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and directed. |
| 49 | Supply and fixingMS round bars/strengthening bar 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm & backing ends and binding with & include MS wire (anealed ) not less than 0.90 mm dia or securing with clips quality confirming to Fe-410W(grade E-250)Quality A or Fe 290 (gde-E-165) complete all as specified and directed. |
| 50 | Supply and fixingFlat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified and directed. |
| 51 | S&F MS tube /Square bars/Angle square bar iron using various section such as poles, rafters, purlins, ladders and cleats all as specified and directed. |
| 52 | S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed. |
| 53 | M&L for preparation of new steel surfaces and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide/ primer complete all as specified and directed. |
| 54 | Material & Labour for preparation of new plasteredsurfaces of ceilingand applying three coat of white (lime) wash complete all as specified and as directed. |
| 55 | Material & Labour for preparation of old surfaces of ceiling(Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as specified and as directed. |
| 56 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying onecoat of synthetic enamel paint complete all as specified and directed. |
| 57 | M&L for Complete removal of existing treatment on new /old plastered sufrfaces and applying water proof cement base putty of average thickness 1mmand make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall care primer complete all as specified and directed. |
| 58 | S&F for 8 feet 4 pipespulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm,made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit . Make : Easydry or equivalent make. |
| 59 | Provn of modular kitchen of cabinet with depth of 600 using 16-18mm plywood with factory pressed laminate (1mm colour laminate external and fabric textured 0.5mm internal) and 1mm PVC edge binding on every edge of the frame complete all as specified and directed. |
| 60 | S&F Auto closing hinges 35mm of 0 crank for kitchen cabinet shutter fixtures and all as specified and directed. |
| 61 | S&F Auto closing hinges 35mm of 8 crank for kitchen cabinet shutter fixtures and all as specified and directed. |
| 62 | S&F Auto closing hinges 35mm of 120 crank for kitchen cabinet shutter fixtures and all as specified and directed. |
| 63 | S&F Ball bearing runners 500mm Telescopic full load extension load capacity of 50 kgs fixed on basket and cabinet walls complete all as specified and directed. |
| 64 | S&F Stainless steel handles 150mm size for kitchen cabinet shutters and all as specified and directed. |
| 65 | S&F Chromium plated stainless steel wire basket (storage basket ) pull out type , size 940x580x580mm of grade 304 with necessary fixing clips etc and all as specified and directed. |
| 66 | S&F Chromium plated stainless steel wire basket (cutlery basket ) pull out type, size 480x500x100mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 67 | S&F Chromium plated stainless steel wire Bottle pull out basket (storagebasket) pull out type, size 100x150x750mm of grade 304 with necessary fixing clips etc complete all as specified and directed. |
| 68 | S&F Chromium plated stainless steel wire Thali basket (storagebasket) pull out type, size 480x150x200mm of grade 304 with necessary fixing clips etc complete all as specified and directed. |
| 69 | S&F Chromium plated stainless steel wire saucer basket (storagebasket ) pull out type, size 480x500x150mm of grade 304 with necessary fixing clips etc fixed complete all as specified and directed. |
| 70 | S&F Double bowl kitchen sink made of stainless steel 1mm thick with plugs, washer and wastes including fixing in cement mortor 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 940x455mm,bowl size 405 mmx 355 mmx 200 mm including CP waste coupling complete all as specified and directed. |
| 71 | Dismantling of boarding, any description, fixed in any position with nails (in floor etc) complete all as specified and directed. |
| 72 | M&L for factory made WPC single extruded board of 18mm thick prelaminated shutter for cupboard prelaminated side with different density and other side plain with density not less than 600kg/cum the 18mm board should be 100% lead free water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified cupboard cabinet and including necessary fittings like hinges handle and hanging rod all as specified and directed. |
| 73 | S & F aluminium anodised hasp and staple, 125mm safety type with mild steel hinge pin including bolt type all as specified and directed. |
| 74 | M&L for new/old plastered surfaces and applying water proof cement base putty of average thickness 1mm andmake the surface free from dust and applying two coats of exterior oil emulsion paint (weather coat) over one coat of exteriorwall care primer complete all as specified and directed. |
| 75 | S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore ofpipe 15mm. including taking up or down old steel tubingand connection cleaning for refixing andmaking hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4. complete all as specified and directed. |
| 76 | S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore ofpipe 20 mm. including taking up or down old steel tubing connection cleaning for refixing andmaking hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4, complete all as specified and directed. |
| 77 | S&F for PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs all as specified and as directed. |
| 78 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps incl dismantaling of old unserviceable cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and directed |
| 79 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps incl dismantaling of old unserviceable cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and directed. |
| 80 | S & F PVC (SWR)junction single(single T)equal or unequal with access door bore of pipe 75 mm complete all as specified and directed. |
| 81 | S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed. |
| 82 | S & F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 83 | S & F Stainless steel Plate rack of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed. |
| 84 | Supply and fixing Kitchen sink tap chromium plated for 15mm bore of pipe of cat part No (QQP-7347PM) of jaquar or equivalent complete all as specified and directed. |
| 85 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and directed. |
| 86 | S & F waste coupling of PTMT (half or full threaded) 32 mm dia complete all as specified and directed. |
| 87 | M & L for PVC waste pipe 32 mm dia flexible with cup & pressure rating 6 kgf/cm2to fit wash hand basin waste coupling complete all as specified and directed. |
| 88 | Taking down carefully copper/aluminum pointwiring(light, fan,Power) completefittings such as switches , ceiling roses pendents , regulatorssockets light fittings etc and making good disturbed surface of wall, floors, roofetc complete all as specified and directed. |
| 89 | M&L for point wiring complete with 1.5 Sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC CasingCappingwith accessories in wall/roof/ceiling etc incl steel modular terminal boxes, concealed surface to wallscovered with modular plates with cover blanking plate etc and 1.5 Sqmm PVC insulated, unsheathed copper conductor multistrandedcable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified and directed.Make of Casing Capping : Polycab/ Modi/ Presto PlastMake of Wire : Plaza/ Polycab/ HavellsNote: (a) Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely).(b) Blanking plate,Modular cover plate and Modular box shall be deemed to include in quoted rates. |
| 90 | Description all as per item 89above but with 4 sqmm copper conductor for 15 amp switch socket outlet combinationincluding 4 sqmm copper earth wire complete all as specified and directed. |
| 91 | S & F Ceiling rose 3 pin flush type 6 Amps, 250 volts ACISI marked, complete all as specified and directed. |
| 92 | Supply and Fixmodular switch1 way 16 Amp.1 module, complete all as specified and directed. Make :Legrand/ Crabtree/ Anchor/ Indoasian |
| 93 | Supply and Fix modular Socket, 16A - 2/3 pin combined 2 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/ Indoasian |
| 94 | S&F electronicfan regulator modular type 230 volts, step type socket type, hum free 100 watt, complete all as specified and directed.Make :Havells / Anchor/ Crabtree/ Indoasian. |
| 95 | Supply and Fixing 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white aluminium extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. Make : Philips/ Bajaj/ CG/Havells.. |
| 96 | Supply and Install kitchen electrically operated Chimney silent suction type having output not less than 1000 meter cube per hour having variable speed control complete with all accessories and suitable length of exhaust duct to be connected to suitable hole reqd as persiterequirement and connected accessories provided by contractor without any extra cost all as specified andas directed (Make Faber model no - STI LUC 3D Max 90BK or equivalent)Note:- (i) Also Cost includes for provision of 40x40x5mm MS angle frame suitably painted with one coat of primer and two coats of synthetic enamel paint duly fixed on walls/ceilings to support the chimneys. |
| 97 | Supply and fixsheet metal enclosure distribution board SPN, 4 way 240 volts, without bus bar, with IP 42 protection and Double Door, suitable for mounting MCBs, complete all as as specified and as directed. |
| 98 | S&F MCB single pole and neutral 240 volts 40 Amps, 10 KA rupturing capacity.C series all as specified and as directed. |
| 99 | M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 Sqmm drawn through in and incl suitable size surface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 6 Sqmm surface PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed.Note: (a)2 runs of 6 Sqmm cable along with one run of 6 Sqmm cable for earth conductor shall be measured as one lengthMake:- Havells/ Polycab/ Plaza. |
| 100 | Supply and Fixing 2 feet surface mounted batten type luminaire, lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white aluminium extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ, complete all as specified and directed. Make : Philips/ Bajaj/ CG/Havells.. |
| 101 | Supply and fixing building security/ LED street light fitting 36 Watt, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, including bracket with impact and corrosion resistant including thermal, management in multiple optics complete, with IP 65/66 protection complete all as specified and directed.Make: Philips/Bajaj/CG/Crompton |
| 102 | Taking down existing fan, (ceiling fan,wall mounting fan,exhaust fan) sealing cable end, dismantling blades and removing fan and blades anddeposit to E/Mstore all as specified and directed. |
| 103 | Supply and fixing Ceiling fan 1200mm sweep, energy efficient ISI mark withstar rating 230 Volts AC 50 Hz, single phase including provision of fixing arrangement, nut and bolt andflexible cable 3 core of size 1.5 sqmm not less than 0.5 m long complete, writing MES No. with synthetic enamel paint all as specified and as directed. Make : Havells/Bajaj/ Orient. |
| 104 | Supply and fixingExhaust Fan 300 mm sweep, 230/240 volt AC single phase, heavy duty,1400 RPM, corrosion less mild steel body of motor, fixing arrangement with MS pipe 350 mm dia of required length for protect reshape of stone masonry, suitable hold fast with necessary nut, bolts / screws writing MES No. with synthetic enamel paint all specified and directed. Make : Havells/Bajaj/ Orient. |
| 105 | Supply and fix Air circulator fans metal body 230 Voltssingle phase oscillating 450mm sweep suitable for wall mounting all as specified and directed. Make : Havells/Bajaj/ Orient. |
| 106 | M & L for drain out the water and taking down thewater heater any capacity and depositto E/M store yard all as specified and directed. |
| 107 | Supply and installwater heater storage type (Geyser) vertical of capacity 25 Ltr, suitable for high pressure up to 8 barpowder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode,efficient long life copper heating element, wattage 2 KW electrically operated, AC 230 Volt, BEE5 Star Rated with complete fittings/partsand accessories for fixing on wall/surfaceall as per site required andspecified anddirected .Make:- Bajaj / Racold / Havells |
| 108 | Supply and installwater heater storage type (Geyser) vertical of capacity 50 Ltr, suitable for high pressure up to 8 barpowder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode,efficient long life copper heating element, wattage 2 KW electrically operated, AC 230 Volt, BEE5 Star Rated with complete fittings/partsand accessories for fixing on wall/surfaceall as per site required andspecified anddirected .Make:- Bajaj / Racold / Havells |
| 109 | M&L for point wiring complete with 1.5 Sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC CasingCappingwith accessories in wall/roof/ceiling etc incl steel modular terminal boxes, concealed surface to wallscovered with modular plates with cover blanking plate etc and 1.5 Sqmm PVC insulated, unsheathed copper conductor multistrandedcable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified and directed for following points :-Make of Casing Capping : Polycab/ Modi/ Presto PlastMake of Wire : Plaza/ Polycab/ HavellsNote: (a) Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely).(b) blanking plate, Modular cover plate and Modular box shall be deemed to include in quoted rates). |
| 110 | (a)One fan/Exhaust fanpoint controlled by one switch. |
| 111 | (b)One 5A 2pin/ 3pin switch socket out let multipurpose on independent Board. |
| 112 | Supply and Fixmodular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/ Indoasian |
| 113 | Supply and Fixmodular switch1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/ Indoasian |
| 114 | M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable sizesurface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed.Note: (a)2 runs of 4 Sqmm cable along with onerun of 4 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. |
| 115 | Supply and fix single pole and neutral sheet encloser with a two pin and earth plug socket complete including one double pole MCB of 20Amp, C curve 10 Ka rupturing capacity complete all as specified and directed. |
| 116 | S&F MCB single pole240 volts 5 to 30 Amps, 10 KA rupturing capacity.C series all as specified and as directed. |
| 117 | Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising of 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installationcomplete all as specified and directed.Make : Model HTSP 317 of safeTrode or equivalent in OBO Betterman/ FURSE/ERICO. |
| 118 | The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. |
| 119 | (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. |
| 120 | (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. |
| 121 | (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor before commencement of work. |
| 122 | (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. |
| 123 | (vi) Copper strip of size 20 x 3 mm (99.99% molecularly copper) shouldbe fixed on proper post insulator at the instrument end ( copper strip upto 7.5 RM will be considered in unit quoted rate and extra will be measured and paid separately). |
| 124 | (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concerned. |
| 125 | (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. |
| 126 | (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintened duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. |
| 127 | (x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. |
| 128 | (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock. |
| 129 | (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. |
| 130 | (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor from final bill for the guarantee period. |
| 131 | (xiv) The electrode shallcarry manufacturer\"s name . |
| 132 | (xv) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination. |
| 133 | (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. |
| 134 | (xvii)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. |
| 135 | (xviii)The contractor shall submit CPRI India certified document for copper bonded rod to ensure genuity of material. |
| 136 | (xix) Sign boardof mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr-in-charge. |
| 137 | Material and labour for Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mmfor each electrode pit complete all as specified and directed. Make : Model SEPC 250 of SAFE TRODE/ Electrogrip Model/ EGTEK3LC of ISG Global or equivalent. Note :- The contractor shall submit load bearing capacity certificate from the manufacturer. |
| 138 | S&F Copper strip of size 20 x 3mm thick (99.99% molecularly copper) as earthing lead fixed to wall/roofs etc complete all as specified and directed. Note : All Joints should be joined by Exothermic Welding or Brazing. |
| 139 | Note :- An amount of Rs 15,701.60 on account of credit schedule for schedule \"A\" part II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
