Power Government Departments Closing in 0 days TDR #46912578

Tender For Repair And Maintenance Of 1 No R3,2 Nos R4 And 4 Nos R5 Type Quarters At 132 Kv Gss Rajakhera , Dholpur - Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raki

Issued by Government Departments · rajakhera, Rajasthan
Tender Value
5.40 Lakhs
Estimated cost
Bid Submission
07 Jan 2025
0 days left
EMD
10800
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
rajakhera → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Repair And Maintenance Of 1 No R3,2 Nos R4 And 4 Nos R5 Type Quarters At 132 Kv Gss Rajakhera , Dholpur - Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) (B-13.1) 2 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : One or more coats on old work. (B-12.46.2) 3 French sprit polishing :Two or more coats on new work including a coat of wood filler.(B.12.48.1) 4 Renewing glass panes with wooden fillets wherever necessary : 4mm thick plain glass panes.(B-13.5.1) 5 B-13/13.24:- Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 6 B-10/10.22:-Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. 7 B-8/8.13.2.1:-Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :30 mm thick . Commercialveneerboth side 8 B-14.43.1:-Dismantling G.I. pipes (external work) including excavation & refilling trenches after taking out the pipes & including stacking of pipes within 50m lead:15 to 40mm nominial bore 9 S-2/2.2.1:- P & F G.I. pipes (External Work) with G.I. Fittings excluding union (IS:1239 Mark) including trenching & refilling earth etc. 15 mm dia nominal bore B Class 10 S-2/2.2.3:- -do- 25 mm dia nominal bore 11 S-2/2.7.4:- P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. brass long body 15mm nominal bore weight not less than 690 gm 12 S-2/2.11.2:- P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,20mm 13 S-2/2.12.1:- P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm.Brass (IS : 8931 marked) 14 S-3/3.16.3:-P & F rigid PVC pipe (IS: 4985 mark ) class II/( 4 Kg./Sq. cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia 15 (S/2.6.1)P & F Pilllar Cocks (IS :8931:1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore 16 S-2/2.15.1-P & F Full way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 17 S-2/2.32.1)Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : (a) 15mm dia nominal bore. 18 S-2/2.32.3)Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : (b) 25mm dia nominal bore 19 (S-1.45.1)P & F looking mirror with P.V.C. frame of approved ( Atul/equivalent) size 500x400 (S-1.48.1) 20 (S-2.26.3)P & F PVC storage tank ( IS :12701 marked indicating the BIS license No.)of approved make with cover, 25mm dia 1mtr. Long G.I. Over flow pipe & 25cm.long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 liters capacity 21 (B-12.37.2b) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffoldingold work ( two or more coats ) over and including scraping and priming coat with Cement primer. 22 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete:Old Plastered Surface (two or more coats)(B-12.22.2) 23 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :stoper of aluminum with doublr rubber gutka(B-13.33d) 24 (B-12.43.2):-Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . old Work 25 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 87.5 110mm dia (S-3.17.9) 26 Bend 45110mm dia (S-3.17.8) 27 P& F waste Pipe with all fitting P.V.C with PVC nut 32 mm (S.1.43.2) 28 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete:(B-13.23) 29 Providing and fixing to existing door frames 30mm thick factory made polyvinyl chloride (PVC) door shutter made of stiles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2mm +/- 0.2mm with inbuiltdecorative moulding edging on one side. The stiles and rails mitred and joined and the corners by means of M.S.galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0mmand stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20 mm and 1mm +/- 0.1mm wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/galvanized M.S.tube ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 610mm,having overall thickness of 20mm and 1mm+/- 0.1mm wall thickness. B/16.18The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers.complete as per manufacturer’s specification and direction of Engineer-in-charge.(For W.C.and bathroom door shutter) B/16.18 30 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. B/16.19 31 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M Cement cover with frame (S-3.21.2) 32 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:in cement mortar (B14.09.02) 33 Supplying & fixing stone lintels /bed plates of aprroved quarry rough dressed in cement mortar 1:4 upto 15cm thick(B/6.18.1) 34 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area 3 square meter and below.(B-14.12.1) 35 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mmthickwith20mmthicknominalsizeaggregate. (B-11.3.1) 36 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia S/3.44.2 37 Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe.(Excluding cost of pipe)150mm dia S.W. pipe S/3.3.2 38 Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint,Add extra for double leaf shutters. (B-9.17.1) 39 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 800mm x 1200mm (B-7.20.2)

BOQ

Name of Work :-R&M of 1nos R-3, 2nos R-4 & 4nos R-5 quarters at 132kv GSS Rajakhera, Dholpur
Sl. No. Item Description
1Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) (B-13.1)
2Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : One or more coats on old work. (B-12.46.2)
3French sprit polishing :Two or more coats on new work including a coat of wood filler.(B.12.48.1)
4Renewing glass panes with wooden fillets wherever necessary : 4mm thick plain glass panes.(B-13.5.1)
5B-13/13.24:- Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.
6B-10/10.22:-Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design.
7B-8/8.13.2.1:-Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A\" :30 mm thick . Commercialveneerboth side
8B-14.43.1:-Dismantling G.I. pipes (external work) including excavation & refilling trenches after taking out the pipes & including stacking of pipes within 50m lead:15 to 40mm nominial bore
9S-2/2.2.1:- P & F G.I. pipes (External Work) with G.I. Fittings excluding union (IS:1239 Mark) including trenching & refilling earth etc. 15 mm dia nominal bore \"B\" Class
10S-2/2.2.3:- -do- 25 mm dia nominal bore
11S-2/2.7.4:- P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. brass long body 15mm nominal bore weight not less than 690 gm
12S-2/2.11.2:- P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,20mm
13S-2/2.12.1:- P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm.Brass (IS : 8931 marked)
14S-3/3.16.3:-P & F rigid PVC pipe (IS: 4985 mark ) class II/( 4 Kg./Sq. cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia
15(S/2.6.1)P & F Pilllar Cocks (IS :8931:1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore
16S-2/2.15.1-P & F Full way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore.
17S-2/2.32.1)Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : (a) 15mm dia nominal bore.
18S-2/2.32.3)Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : (b) 25mm dia nominal bore
19(S-1.45.1)P & F looking mirror with P.V.C. frame of approved ( Atul/equivalent) size 500x400 (S-1.48.1)
20(S-2.26.3)P & F PVC storage tank ( IS :12701 marked indicating the BIS license No.)of approved make with cover, 25mm dia 1mtr. Long G.I. Over flow pipe & 25cm.long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 liters capacity
21(B-12.37.2b) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffoldingold work ( two or more coats ) over and including scraping and priming coat with Cement primer.
22Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete:Old Plastered Surface (two or more coats)(B-12.22.2)
23Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :stoper of aluminum with doublr rubber gutka(B-13.33d)
24(B-12.43.2):-Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . old Work
25P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 87.5 110mm dia (S-3.17.9)
26Bend 45110mm dia (S-3.17.8)
27P& F waste Pipe with all fitting P.V.C with PVC nut 32 mm (S.1.43.2)
28Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete:(B-13.23)
29Providing and fixing to existing door frames 30mm thick factory made polyvinyl chloride (PVC) door shutter made of stiles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2mm +/- 0.2mm with inbuiltdecorative moulding edging on one side. The stiles and rails mitred and joined and the corners by means of M.S.galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0mmand stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20 mm and 1mm +/- 0.1mm wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/galvanized M.S.tube ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 610mm,having overall thickness of 20mm and 1mm+/- 0.1mm wall thickness. B/16.18The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers.complete as per manufacturer’s specification and direction of Engineer-in-charge.(For W.C.and bathroom door shutter) B/16.18
30Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. B/16.19
31Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M Cement cover with frame (S-3.21.2)
32Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:in cement mortar (B14.09.02)
33Supplying & fixing stone lintels /bed plates of aprroved quarry rough dressed in cement mortar 1:4 upto 15cm thick(B/6.18.1)
34Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area 3 square meter and below.(B-14.12.1)
35Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mmthickwith20mmthicknominalsizeaggregate. (B-11.3.1)
36Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia S/3.44.2
37Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe.(Excluding cost of pipe)150mm dia S.W. pipe S/3.3.2
38Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint,Add extra for double leaf shutters. (B-9.17.1)
39Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 800mm x 1200mm (B-7.20.2)

AI Tender Summary

OUR REF NO 46912578
AUTHORITY Government Departments
TENDER VALUE 5.40 Lakhs
LAST DATE 07-01-2025
Authority
Authority Name Rajasthan Rajya Vidyut Prasaran Nigam Ltd
Work Description Tender For Repair And Maintenance Of 1 No R3,2 Nos R4 And 4 Nos R5 Type Quarters At 132 Kv Gss Rajakhera , Dholpur - Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) (B-13.1) 2 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : One or more coats on old work. (B-12.46.2) 3 French sprit polishing :Two or more coats on new work including a coat of wood filler.(B.12.48.1) 4 Renewing glass panes with wooden fillets wherever necessary : 4mm thick plain glass panes.(B-13.5.1) 5 B-13/13.24:- Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 6 B-10/10.22:-Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. 7 B-8/8.13.2.1:-Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :30 mm thick . Commercialveneerboth side 8 B-14.43.1:-Dismantling G.I. pipes (external work) including excavation & refilling trenches after taking out the pipes & including stacking of pipes within 50m lead:15 to 40mm nominial bore 9 S-2/2.2.1:- P & F G.I. pipes (External Work) with G.I. Fittings excluding union (IS:1239 Mark) including trenching & refilling earth etc. 15 mm dia nominal bore B Class 10 S-2/2.2.3:- -do- 25 mm dia nominal bore 11 S-2/2.7.4:- P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. brass long body 15mm nominal bore weight not less than 690 gm 12 S-2/2.11.2:- P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,20mm 13 S-2/2.12.1:- P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm.Brass (IS : 8931 marked) 14 S-3/3.16.3:-P & F rigid PVC pipe (IS: 4985 mark ) class II/( 4 Kg./Sq. cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia 15 (S/2.6.1)P & F Pilllar Cocks (IS :8931:1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore 16 S-2/2.15.1-P & F Full way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 17 S-2/2.32.1)Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : (a) 15mm dia nominal bore. 18 S-2/2.32.3)Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : (b) 25mm dia nominal bore 19 (S-1.45.1)P & F looking mirror with P.V.C. frame of approved ( Atul/equivalent) size 500x400 (S-1.48.1) 20 (S-2.26.3)P & F PVC storage tank ( IS :12701 marked indicating the BIS license No.)of approved make with cover, 25mm dia 1mtr. Long G.I. Over flow pipe & 25cm.long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 liters capacity 21 (B-12.37.2b) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffoldingold work ( two or more coats ) over and including scraping and priming coat with Cement primer. 22 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete:Old Plastered Surface (two or more coats)(B-12.22.2) 23 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :stoper of aluminum with doublr rubber gutka(B-13.33d) 24 (B-12.43.2):-Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . old Work 25 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 87.5 110mm dia (S-3.17.9) 26 Bend 45110mm dia (S-3.17.8) 27 P& F waste Pipe with all fitting P.V.C with PVC nut 32 mm (S.1.43.2) 28 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete:(B-13.23) 29 Providing and fixing to existing door frames 30mm thick factory made polyvinyl chloride (PVC) door shutter made of stiles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2mm +/- 0.2mm with inbuiltdecorative moulding edging on one side. The stiles and rails mitred and joined and the corners by means of M.S.galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0mmand stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20 mm and 1mm +/- 0.1mm wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/galvanized M.S.tube ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 610mm,having overall thickness of 20mm and 1mm+/- 0.1mm wall thickness. B/16.18The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers.complete as per manufacturer’s specification and direction of Engineer-in-charge.(For W.C.and bathroom door shutter) B/16.18 30 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. B/16.19 31 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M Cement cover with frame (S-3.21.2) 32 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:in cement mortar (B14.09.02) 33 Supplying & fixing stone lintels /bed plates of aprroved quarry rough dressed in cement mortar 1:4 upto 15cm thick(B/6.18.1) 34 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area 3 square meter and below.(B-14.12.1) 35 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mmthickwith20mmthicknominalsizeaggregate. (B-11.3.1) 36 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia S/3.44.2 37 Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe.(Excluding cost of pipe)150mm dia S.W. pipe S/3.3.2 38 Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint,Add extra for double leaf shutters. (B-9.17.1) 39 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 800mm x 1200mm (B-7.20.2)
Basic Detail
Tender No SE/CIVIL/KOTA D558 DT 18.12.2024
Bidding Type Tender
Location
City rajakhera
State Rajasthan
Key Dates
Publish Date 26 Dec 2024
Submission Date 07 Jan 2025
Open Date 08 Jan 2025
Finance
Tender Value 5.40 Lakhs
Tender Fee 590
EMD 10800
Exemption Available
Document List
Amendmentcontractagreement.pdf
BOQ_790758.xls
030b8d7f-2789-4014-b374-35157fe854c7.html
circularofunbalacedbid.pdf
FinalContractagreement.pdf
RNMRAJAKHERABIDDOC.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 26, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 07, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 08, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Amendmentcontractagreement.pdf

xls

BOQ_790758.xls

html

030b8d7f-2789-4014-b374-35157fe854c7.html

pdf

circularofunbalacedbid.pdf

pdf

FinalContractagreement.pdf

pdf

RNMRAJAKHERABIDDOC.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender