|
| 1 | Surface dressing n exc 15 cm deep in soft/loose soil all as spd. |
| 2 | Excavation in trenches not exc 1.50 M wide and not exceeeding 1.50M in depth for foundation\"s soft well as its manhols, pier hales etc n exc 10 Sqm on plan and not exc 1.50m in depth and getting out soft/dis integrated rock\"s complete all as specified and directed. |
| 3 | Material & Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed includingwatering as required complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 6 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 7 | Material & labour Reinforced cement concrete Design mix (M-25) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed. |
| 8 | Material & labour Reinforced cement concrete Design mix (M-25) as inColumns, footing, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | Material & labour Reinforced cement concrete Design mix (M-25) as in roof beam, plinth beam,roof beam, lintel beams and Columns complete all as specified and directed. |
| 10 | Material & labour Reinforced cement concrete Design mix (M-25) as in chajjas complete all as specified and directed. |
| 11 | Material & labour Reinforced cement concrete Design mix (M-25) as in Slabs supported on walls, ,chajjas, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 12 | Material & labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, roof beam, plinth beam, slab,chajjas and similar work hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | Ditto all as peritem no 12above but 5 mm dia and over up to and incl 8 mmdia as in stirrups |
| 14 | Material & labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. |
| 15 | Material & labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc |
| 16 | Material & labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 17 | Material & labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 18 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide |
| 19 | Material & Labour for Brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) complete all as specified and directed. |
| 20 | M&L for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 |
| 21 | Material & labour for 15 mm thick rendering in CM 1:6 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. |
| 22 | Material & labour for 15 mm thick rendering in CM 1:4 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. |
| 23 | Material & labour for 5 mm thick rendering in CM 1:3 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. |
| 24 | Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed. |
| 25 | Material & Labour for providing and applying 1 to 2mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting. |
| 26 | Material & labour for preparation of newly plastered surfaces of wall and applying two coat of Ist quality exterior weatherproof water base emulsion paint over a coat of primer of same make on wall as specified and directedpillasters, cornices etc (upto G+3 storied building) scrapping down , brooming down or steel wire brushing, and washing with water after completion of precoat treatment applying two coats of Anti fungal Weather coat paint (Exterior emulsion) white or tinted over a coat of primer (X2) complete all as specified and directed. Note :-(a) Each stage i.e preparation of surfaces, application of primer, application of first coat.application of second coat will be got passed from Engr-in-Charge/GE.(b) Written Warranty for four years or as per manufacturer\"s instructions, whichever is more is required to be furnished by contractor for this item. |
| 27 | Material &Labour for preparation of surface and applying two coat of acrylic emulsion with roller on new treated surfaces of wall etc complete all as specified and directed. |
| 28 | Material & labour for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling surface complete allas specified and directed. |
| 29 | Material & Labour first or premium quality joint free vitrified cerameic tiles of any colour 9 to10mm thick light shade (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 30 | Material & Labour for vitrified cerameic tiles 9 to10mm thick light shade (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed in cement mortar 1:4 complete all as specified and directed. |
| 31 | M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 32 | M&L glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cementmortar 1:4 complete all as specified and directed. |
| 33 | M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill ofparapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE |
| 34 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 35 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 36 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ;barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 37 | Supply & Fixingfor 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 38 | Supply & Fixingfor IInd class Hard wood35 mm thick glazed and skeleton(doors)shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed. |
| 39 | Supply & Fixing for galvanised Stainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 40 | Supply & Fixing for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 41 | Material & labour 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified |
| 42 | Supply & Fixing for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified |
| 43 | Supply & Fixing 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified. |
| 44 | Supply & Fixingextruded aluminium alloy handles fabricated type anodised 150mm size as specified. |
| 45 | S & F aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 46 | S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame /wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete. |
| 47 | S & F in repair powder coated aluminium door seal 30mm wide and 1.82mm thick and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 48 | Material & labour Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty as directed. |
| 49 | S&F18mm thickfactory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade. |
| 50 | S & FModular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m to0.50 m x 0.53 m x 0.21 m(dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangementcomplete as specified and dirceted. |
| 51 | S&F 100mm size MS mat/glossy finish handle complete as specified and directed. |
| 52 | S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete as specified and directed. |
| 53 | S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete as specified and directed. |
| 54 | S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed. |
| 55 | S& F 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, conforming to ISfixed with screws timber frame work asin cupboard , wardrobe etc. |
| 56 | M & L0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, conforming to IS fixed with approved adhesive over 18/19 mm thick plywood as per manufacturer\"s instructions complete all as directed and specified. |
| 57 | M & L 2nd class hard wood n.exc 6 sq.cm Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads.complete all as directed and specified. |
| 58 | S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt, ISI marked complete all as specified. |
| 59 | S&F Aluminium handles, cast type anodised \"D\" shaped , 100mm long ISI marked all as specified. |
| 60 | S & F 100 mm length Hasp and staple, mild steel, wire type stove enemelled black , including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 61 | M & L for screed bed15mm thick in cement mortar 1:3 mixed with integral water proofing compoundwhile concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item). |
| 62 | M&L Water proofing treatment on \"Non approachable / non accessible roof\" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete.(i) Cleaning of new rendered surfaces properly and drying the surfaces.(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm(iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by \"torchon\" method.(iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats .Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete as per manufacturers instruction. |
| 63 | S & F 15mm dia GI Pipe incl jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete. |
| 64 | S & F 25mm dia GI Pipe incl jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete. |
| 65 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone/ brick walls all as spd. |
| 66 | S&F1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 complete. |
| 67 | S&F ball valve/float ballhigh pressure of PTMT 20mmwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed. |
| 68 | S & F Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mmcomplete all as specified and directed. Make :- Nirali , Diamond, Jain Brothers Sanitation Pvt Ltd |
| 69 | S & F swan neck Sink tap swinging/rotatable spout with connecting legs & wall flanges. Make : Plumber, Prayag or equivalent complete all as specified and directed |
| 70 | S & F 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed. |
| 71 | S & F Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified. |
| 72 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length withrubber ring joints,laid in floor/ trenchescomplete all as specified and directed. |
| 73 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length withrubber ring joints,fixed to wallscomplete all as specified and directed. |
| 74 | S & F 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 75 | S & F 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 76 | S&F 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof |
| 77 | S&F 25 mm dia stainless steel curtain rod as approved by GE complete all as spd and directed. |
| 78 | S&F 25 mm diaS/S decorative brackets with arrangements as approved by GE complete all as spd and directed. |
| 79 | M&L stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 mm thick |
| 80 | M & L 60mm thick Machine pressed precast concrete interlocking paver block fixing with grey cement and pigmentsof \" I \" shape or as approved by GE ,and anycolour and size confirming to IS 15658-2006 of M-35 Grade set , laid over 50 mm (average) thick dust sand cushioning,filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surface even and smooth complete all as specified and as directed. Note : Sand cushioning shallbe measured and paid separately . |
| 81 | M&L for point wiring with 1.5 Sq mmsingle corePVC insulated unsheathedcopper FRLSH multi stranded conductor cable in andincludingConcealed PVC conduitof size 20/25mm ISImarked inclusive oftees ,bend ,elbows etc upto and includingmodular sunken anodisedsteel box for housing modular switch socket , regulator etcincluding modular cover plate and cover frame of any moduleISI marked of suitable size complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for One light point /fan controlled by one, one way switch 5 Amps |
| 82 | All as per item No 01 here in above but for One Light point / fan point/ controlled by one, one way switch 5 Amps . |
| 83 | All as per item No 01 here in above but forOne 3 pin, 5 Amps , socket outlet point controlled by one switch on the same board. |
| 84 | All as per item No 01 here in above but for One 3 pin, 5 Amps , socket outlet point controlled by one switch onIndependent board. |
| 85 | All as per above item No 1 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent boardincluding necessary running of2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.Complete all as specified and directed. |
| 86 | All as per above item No 1 here in before butusing 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point connecting to metal plug and socket DB incl necessary running of4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.Complete all as specified and directed. |
| 87 | S & F for Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified. |
| 88 | S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified. |
| 89 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 modulecomplete all as specified. |
| 90 | S & F forModularSocket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 modulecomplete all as specified. |
| 91 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified |
| 92 | M&L for Sub main wiringwith two runs of single core FR LSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, includingPVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian :- Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 93 | M&L for Sub main wiringwith Fourruns of single core FR LSHPVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable (Two runs of 6 Sq mm cable for earth wire) connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Note: Four Run of Single Core FRLSH ( 6Sq mm) Cable and two runs for same size as earth wire(6 Sq mm). 4 X 6 Sqmm ( For R Y B (For Phase) and B (for Neutral) + 2 X 6 Sqmm ( ForEarth wire)Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian & Make Of wire - Make - HPL/L&T/HPL/Havells |
| 94 | Supply and Fix flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08,with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of sapce for TP/FP 100-125 amps G FrameMCCB as incomer and SP/TP MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge.Make - HPL/L&T/HPL/Havells |
| 95 | S & FMCCB FP 125 Amps ,415 V Fixed type ,with breaking capacity 25 KA including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/HPL/Havells |
| 96 | S & F in repairs MCCB FP 100 Amps ,415 V Fixed type ,with breaking capacity 25 KA including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/HPL/Havells |
| 97 | Supply and fixdouble door TPN DBs four wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/HPL/Havells |
| 98 | S & F in repairs MCB TP 25 to 63 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/HPL/Havells |
| 99 | S & F in repairs MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/HPL/Havells |
| 100 | S & F for sheet metal enclosure MCBDBSPN8 way, IP-43, IK 09 with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 101 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 102 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 103 | S & F for metal clad box suitable for 230 volt 50 Hz for ACconnection three pin and socketwith MCB SP 20/32 Amps one complete all as specified and as directed complete all as specified and as directed |
| 104 | Supply and fixing ceiling fans complete with blades, down rods , With remote control and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service valuegreater than 7.50BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed. |
| 105 | S&F in LED ceiling light fittings 34/36 watt surface mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc including taking down the existing. Make Jaguar Cat No. LULT02S036XC, Crompton Cat No. LCTLRN-36-FO-CDL, BajajCat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells Wipro. |
| 106 | Supply and fix integrated LED tube light fitting 1x18/20 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro |
| 107 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm diamedium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat No ENXT P 36L WH CR PC SD ofBajaj or equivalent make in Philips, Wipro/Havells |
| 108 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPEinsulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 3.5 core x 35 Sqmm complete all as specified and directed |
| 109 | Excavationin trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation ,laying of cable or pipe ( where provide for protection of cable or fixing poles and stay and getting out insoft/loose soilincluding trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engr-in-charge. |
| 110 | Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cmafter laying of cables including spreading, levelling, and well ramming complete all as specified and directed. |
| 111 | Removing surplus excavated soil to a distance n.exc. 50 metre anddepositing where directed at a level n.exc.1.5 metre high from the starting point. |
| 112 | M & L for Local sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protectioncomplete all asspecified. |
| 113 | M&L for bricksslightly over burnt (kiln burnt) , modularbricks , best quality, locally available , laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brickfor cable protection all as specified and as directed. |
| 114 | Supply laying and jointing GI pipe\"light grade\" 80 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittingscomplete all as specified and directed. |
| 115 | Earthing complete with galvanisedsteel earth plate electrode60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate notless\"than 1.5 metres below normalground level, connected togalvanised earth lead wire 4.0mmdia by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion.Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
