Tender For 3- Repair And Renovation Work Of Dak Bungalow And Kitchen Store Building Located At Sandi Of Zila Panchayat - Dismantling brick work or stone work in lime or cement mortarincluding stacking of materiala as directed by te Engineer-in-charges with in a distanceof 60 meters (200ft.) 3 Dismantling exiting plaster including disposal of refuse as directed by te Engineer-in-charges with in a distanceof 60 meters (200ft.) 4 Dismantling cementconcrete or brick or granolithic floors including base cocrete and including stacking of dismmantled materials as directed by the Engineer-in-charges with in a distanceof 60 meters(200ft.) 5 Dismantling dooror window including stacking of dismantled material as directed by te Engineer-in-charges with in a distanceof 60 meters (200ft.) 6 Disposalof malba . (5 Km.) 7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 8 12 mm. Cement plaster in single coat on rough side single or half brick wall for interior plasterup to floor two level including arises internal rounded angles not exceeding 80 mm. in grith and finished even and smooth. Outer side ratio 1: 6 ( 1 cement :6 Coarse sand ) 2.25 FM 9 15 mm. Cement plaster in single coat on rough side single or half brick wall for interior plasterup to floor two level including arises internal rounded angles not exceeding 80 mm. in grith and finished even and smooth. Outer side ratio 1: 6 ( 1 cement :6 Coarse sand ) 2.25 FM 10 C.C. 1:3:6 (FLOORING) 11 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete. Tile Size 600x600 12 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Tile Size 500x500 13 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 14 Providing and applying white plaster of parisputty of average thickness 2mm approved brand and manufacture over the plastic wall surface to prepare the surface even and smost complete. 15 Finishing walls with acralic smooth exterior & interiorpaint . New work ( two or more coat applied @1.67lit/10 sqm over and including priming coat of exterior primer applied @.09 lit/10sqm) 16 Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, alongthe external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved materialsuch as Heptrachlor or chordancewill be used. The rate of application of chemical emulsion shallbe asfollows : 17 (1)Treatment for masonary & foundation 5 liters per/sqm. 18 (2) Back fill in immediate contact with foundation 7.5 liters/sqm 19 (3) Treatment of topsurfaceof plinth filling 5 liters/ sqm 20 (4)Treatmentjunction of wallandthe floor 7.5 liters / sqm 21 (5)Treatmentofsoilalong external perimeter of building 7.5liters/sqm. 22 (6) Treatment of soil under apronalong external perimter 5 liters/ sqm. 23 CHAUKHAT DOOR 24 CHAUKHAT WINDOW 25 32 mm thick Flush door with all accessories 26 WINDOW 27 VENTILATOR 28 SS. RAILING ( CHABOOTRA) 29 Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. 30 Wiring points for Fan /Fresh air fan (light duty exhaust fan )with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire, piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. 31 Wiring points for Plug with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socketsheet etc.complete in all respects.as directed including matching colour wash. 32 Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. 33 Addition for light / fan points with modular type switchin place of piono type switch. 34 Addition for plugpointswith modular type switchin place of piono type switch. 35 Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable inPVC conduitpipe partly concealed including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. 36 Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in20mm dia heavy duty (2mm thick ) PVC conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. 37 Supply & fixing of single wall bracketon matching M.D.F.E.G.boardbase etc. complete in all required. 38 Cat. AAA 39 Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. 40 Cat. AAA 41 Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 42 5 - 32 amps.Cat. A 43 Supply and fixing of 40/63 Amp MCB(10KA)C Curve 44 40 Amp. 4 Pole MCB Cat. A 45 63 Amp. 4 Pole MCB C Curve-Cat. A 46 Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 47 600x480x200 mm. size 48 Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 Vflush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. 49 Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. 50 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. 51 Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. 52 Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 53 Supply and erection of AC 1200/1400 mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required 54 Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 55 370mm sweep. 56 S& INST. Connection wire pole to residence 57 PLUMBING WORK 58 SUNMERSIBLE
