Tender For Construction Work At Govt.Sr.Sec.School Rajpura Block Laxmangarh Dist. -Sikar - Mjsy 2022-23 M.Repair Work At Govt.Sr. Secondary School Rajpura , Block-Laxmangarh, Dist-Sikar Sl. No. Item Description 1 Part-A : Civil Work 2 Demolishin, rajpura-Rajasthan

Tender For Construction Work At Govt.Sr.Sec.School Rajpura Block Laxmangarh Dist. -Sikar - MJSY 2022-23 M.REPAIR WORK AT GOVT.SR. SECONDARY SCHOOL RAJPURA , BLOCK-LAXMANGARH, DIST-SIKAR Sl. No. Item Description 1 Part-A : Civil Work 2 Demolishing cement concrete and disposal of material within 50 meter lead. (a) 1:3:6 or richer mix. (B-14.2.1) 3 P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size). 4 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm 5 Level Coarse -Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). 6 P&F APP (Atactic Polypropylene Polymer) modified free fabricated five layer 3mm thick water proofing membrance, black finished reinforced with glass fibre matt manufactured by Bitumat Company Ltd. Soprema or Tamkoj, consisting of a coat of bitumen primer for bitumen mebrance @ 0.40 Qtl/ sqm by the sub-membrance manufactured of density of 25 degree C, 0.87-0.89Kg/ ltr and viscosity 70-160 CPS over the primer coat the layer of membrance shall be laid using butancetorch also sealing all joints etc. and preparing the surface complete. The vital physically and chemical parameters of the mebrance shall be as under- Joint strength in longitudinal and transverse direction at 23 degree C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150 Degree C. Cold flexibility shall be upto 2 C when tested in accordance with ASTM, D-5147 (The laying of mebrane shall be got done through the authorized applicator of the manufacture of membrane). 3mm thick 7 Gola Providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stoneaggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. 8 Brick masonary in foundation and plinth with bricks of class designation 75 mm in : 9 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 10 Outer Plaster:-Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick 11 Exterior Finishing: Finishing wall with water proofing cement paint of appd brand & manufacture and of reqd. shade to give an even shade including all scafolding New work (three or more coats applied at the rate of 3.84 kg/10 sqm) 12 Internal Finishing: Distempering with oil bound washeble distemper of approved brand and manufacture to give an even shade including all scaffolding new work (two or more coats) over and including scrapping and priming coat with cement primer 13 P/S/F of rigid pvc pipe II class for rain water disposal 110mm dia(S- 3.19.3) 14 P/S/F of rigid pvc pipe(IS 4985 mark) approved quality & make including joining the with solvant cemet rubber ring and lubricant 110 mm dia(rain water disposal)(S- 3.17.9) 15 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Pipe clip S3- 3.17.15 16 PANTING ON DOORS & WINDOWS:- Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shadenew steel work (2 or more coat on new work).

INR 1000 /-

INR 9720.0 /-

INR 4.86 Lakhs /-