Tender For special Repair To Bldg No Ds-15 (Hrdc) Of 9 Arty Bde Camp Under Ge (North) Meerut Cantt- 1 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed. 2 M&L brick work old size with sub classfly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed. 3 M&L brickwork old size with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed. Note :- Old serviceable bricks obtained form demolation shall be re-used under this item after cleaning. 4 Demolition of cement concrete in ground floor n exc 15 cm in depthin any position nototherwise specifically provided for complete all as specified & directed. 5 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed. 6 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg)25 mm thick for Sub base flooring complete all as specified & directed. 7 M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor colour cemnt to match including 15 mm thscreed ded in CM 1:6 complete all as specified & directed. 8 S&Fnon skidcoloured ceramic tiles of7 to 8 mm thick (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed inneat cement slurry and pointed with whiteor coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. 9 All as per item No 8.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. 10 S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4)joint free with grout of matching shadecomplete all as specified & directed. 11 Preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth complete all as specified & directed. 12 Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified & directed. 13 Supplied and fixed Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions complete all as specified & directed. 14 Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions complete all as specified & directed. 15 Demolition of Stone slabs and tiles of any description or thickness in floors, apronslaid and pointed in any mortor etc complete all as specified & directed. 16 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed. 17 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed. 18 Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed. 19 Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed. 20 M&L factory made gauged shutter shall be made out of U Frame 35x35x5mm and 25x25x5mm and 1.5mm thick, 10mm Square bars grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing complete all as specified and directed by Engr-in -Charge. 21 S&F for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified & directed. 22 S&F powder coated anodised aluminium windows slidingtype (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick plain sheet glass complete all as specified and directed. 23 S&F forSteel ventilator with top hung shutter including hinges, steel peg stay complete all as specified & directed. 24 S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 25 Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed. 26 S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified & directed. 27 S&F aluminium slidingdoor bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed. 28 S&F mild steel heavy weight butt hinges 100mm in sizecomplete all as specified and directed. 29 S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified & directed 30 S&F mild steel 150mm size helical door springincluding roller and roller plate fixed with screws to wooden chowkat or welded to steel frame complete all specified and as directed. 31 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed. 32 M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 33 M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4,surface finsihed even and smooth without using extra cement complete all as specified & directed. 34 M&L Rendering 10 mm thickon fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3) complete all as specified & directed. 35 Preparation of old plastered surface of wall after complete removal of existing treatment by mechanical means complete all as specified and directed. 36 M&L for 1 coat of prime on wall using roller complete all as specified and directed. 37 Preparation of old steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 38 M&L for Two coat of OBD and2mm two coat putty using roller for painting complete all as specified and directed. 39 M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed. 40 Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm andtwo coat putty using roller for painting complete all as specified and directed. 41 Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed. 42 All as per S aboveitem41 above but 20 mm bore pipe complete all as specified and directed. 43 Supplying and laying of CPVC 16mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed. 44 Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed. 45 Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed. 46 S&F 1000 litre rotational moulded triple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) including nipple nuts, washers for fixing inlet, outlet/ washout pipes and air vent pipes and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I and including dismantling water tanks any type and removing from site complete all as specified and directed. 47 S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed. 48 S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwedfor iron pipe or for brass ferrule complete all as specified and directed. 49 S&F in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. 50 S&F in repair 15 mm dia stop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with crutch or butterfly handle, flenchscrewed both ends for iron or for union complete all as specified and directed. 51 S&F in repair of vitreous chinawashdown closet pan (pedestal type) white (excluding fixing bolts ,flushing cistern and flush pipe) squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. 52 S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. 53 S&F in repair 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. 54 S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. 55 S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. 56 Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 57 S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed. 58 S&F in repair CP brass soap dish complete all as specified and directed. 59 S &FGrating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. 60 Supply and fixin repairs 75mm bore PVC (SWR)Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in wastecomplete all as specified & directed. 61 Supply and fix in repais 110mm borePVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in waste and rain water pipes complete all as specified & directed. 62 Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed. 63 Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed. 64 S&F110mm PVC (SWR) vent cowl complete all as specified and directed. 65 S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 66 S&F 110mm PVC (SWR) Strap complete all as specified and directed. 67 S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. 68 S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia.fixed in repair) complete all as specified and directed. 69 S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) complete all as specified and directed. 70 S&F in repair 15mm dia chromium plated fancy type wall mixerfor mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. 71 Supply and fixingPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed 72 S & F 25 mmbore Harison railscurtain rod mild steel chromium plated with fixing brackets stops ,rollers and ring complete all as specified and directed. 73 Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. 74 M&L injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. 75 Treatment of soil under existing floors using ATT emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified and directed. 76 M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 complete all as specified and directed. 77 Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall complete all as specified and directed. (WPC will be measured and paid seperately as supply only rate). 78 Cutting groovesin brick/ concretewall 75 mm wide and 65 mm deep and shaping horizontal face of grooveand making good disturbed surfacein CM 1:3 after inserting APP membrane(Chasing shall be cut where height of parapet wall is more than 300mm.) complete all as specified & directed. 79 Supply only liquid water proofing compound complete all as specified and directed. 80 Material & labour for cleaning of concrete or plasteredsurfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followedevenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thickAPP modified polymeric waterproofing membrane reinforced with non-woven polyester fabric (weightnot less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction andapplying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymericwater proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same positionconnecting) complete all as specified and directed. 81 Treatment the soil under plinth protection using ATT emultion at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and directed. 82 M&L for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. 83 M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 complete all as specified and directed. 84 M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggragate) as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed. 85 M/L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and directed. 86 M&L for chequered cement concrete colourtiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified & directed. 87 Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed by Engineer - in - Charge. 88 Material and labour for point wiringwith 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- 89 One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 90 One Fan /Exaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 91 One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. 92 One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. 93 All as per serial item No 88.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed. 94 All as per Item No. 88.03 above but with 4sqmmmulti stranded PVC insulated, unsheathed copper conductor,FR, cable in and including in rigid PVC conduit 20 mm dia or higher medium grade complete all as specified and directed. 95 Supply and fixswitch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge. 96 Supply and fix insocket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge . 97 Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed of make Cona/Legrand/SSK. 98 Supply and fix inswitch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 99 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed. 100 Supply anfd fixing Led lamp 9/10 watt complete all as specified and directed. 101 Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed. 102 Supplying & fix LED tube light fitting T/5 surface mounting poly carbonate batten 240 volts 10 watts, 6500K complete all as specified & directed. 103 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. 104 Supply and fixing 1x36/40W LED Building security lightenergy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed. 105 S&F in repairs LED Recess mounted, ceiling panel, 2x2, 36 watts, 240V light fitting with heat exchanger unitcomplete all as specified and directed. 106 Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. 107 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed by Engineer - in -charge. 108 Supply and fixing MCB, SP, AC, 240 volts C series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed. 109 Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps to 40 Amps10kA and making connections complete all as specified & directed. 110 Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 54 & IK 09 protection, with the inbuilt provison forfixing of 1 No MCCB and 12 Nos MCBS inside of DB, with metal double door and flush to wall including grouting and cutting in existingwall and making good disturbed surfacewith two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed by Engineer - in - Charge. 111 Supply and fixIingMCCB 4 pole 125 Amps 16 kA complete all as specified and directed. 112 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed. 113 Supply and fixing fan ceiling complete with blades, down rods, electronic regualtor and accessories ,230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.Five Star rated with Brushless direct current motor (BLDC) complete all as specified & direced. 114 supply and fixing PVC Exhaust fan with louver and fixing accessories 230 Volt and250 mm sweep complete all as specified and directed. 115 S&F SPN enclosure with 2 pin earth plug socket complete with one MCB 20Amps complete all as specified and directed.
