|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering all work uo to plinth level.1:4:8 (1cement:4manufactured sand derived from recycled concrete aggregate RCA : 8 graded stone aggregate 40mm nominal size recycled aggregate (RA). |
| 3 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering all work uo to plinth level.1:1.5:3 (1cement:1.5manufactured sand derived from recycled concrete aggregate RCA : 3 graded stone aggregate 40mm nominal size recycled aggregate (RA). |
| 4 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering all work uo to plinth level.1:1.5:3 (1cement:1.5manufactured sand derived from recycled concrete aggregate RCA : 3 graded stone aggregate 40mm nominal size recycled aggregate (RA). |
| 5 | Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing.1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).R.C.C. Lighter Beam |
| 6 | Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing.1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).R.C.C. Slab, |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on bothfaces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 13 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws D.S.R. 9.21.3 |
| 14 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer.M.S. tube |
| 16 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes D.S.R. 10.30.1 |
| 17 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (250x16mm) D.S.R. 9.96.2 |
| 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (300x10mm) D.S.R. No. 9.97.1 |
| 19 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (125 mm) D.S.R. No. 9.100.1 |
| 20 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper D.S.R. No. 9.101.2 |
| 21 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm D.S.R. No. 9.79.2 |
| 22 | 12 mm cement plaster of mix :-1:4 (1 cement: 4 fine sand) |
| 23 | 12 mm cement plaster of mix-1:6 (1 cement: 6 fine sand) |
| 24 | 12 mm cement plaster of mix-1:6 (1 cement: 6 fine sand) |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 27 | 12 mm cement plaster finished with a floating coat of neat cement of mix :-1:3 (1 cement: 3 fine sand) |
| 28 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shadecomplete. |
| 29 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including waterthinnable priming coat with cement primer |
| 30 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 31 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 32 | Providing and fixing 20 mm cement plaster with ratio ( 1 cement : 4 coarse sand As per D.S.R. No.13.6.1 |
| 33 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 34 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 35 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers ,Slab |
| 36 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. (a) 32 mm dia |
| 39 | Providing and fixing terminal guard : Sand cast iron S&S as per IS - 1729 75 mm |
| 40 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :75 mm |
| 41 | Providing and fixing Slotted Cowl guard in the 75 mm dia.Ventilater pipe. |
| 42 | Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore 45 cm long. D.S.R. 18.21.2.1 |
| 43 | Providing & fixing soil, waste and vent pipes. |
| 44 | (a) 100 mm dia centrifugally cast iron S & S pipe. |
| 45 | (b)75mm dia centrifugally cast iron S & S pipe. |
| 46 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 47 | (a)For 100 mm dia pipe |
| 48 | (b)For 75 mm dia pipe |
| 49 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. |
| 50 | (a)For 100 mm dia pipe |
| 51 | (b)For 75 mm dia pipe |
| 52 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :(b)For 75 mm dia pipe |
| 53 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :(b)100 mm inlet and 100 mm outlet |
| 54 | Providing and fixing cost iron coller. |
| 55 | (a)For 100 mm dia pipe |
| 56 | (b)For 75 mm dia pipe |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Exposed on wall |
| 58 | (a) 25 mm dia nominal bore |
| 59 | (b) 40 mm dia nominal bore |
| 60 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :(a) 15 mm dia nominal bore |
| 61 | Providing and fixing uplasticised PVC connection pipe with brass unions :(a) 15 mm dia nominal bore |
| 62 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(a) 25 mm dia nominal bore |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(a) 25 mm dia nominal bore |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Capacity (500 Ltr.X1 ) |
| 65 | Providing and fixing brass stop cock of approved quality :(b) 15 mm dia nominal bore |
| 66 | P/F of ISI marked CP brass bib cock 15 mm. with flage of approved quality Short body Cock ( Jaquar 037 or equivalent) |
| 67 | Making soak-pit 2.5 m. diameter and 3 m. deep with 45 x 45cm dry brick honey comb shaft with F.P.S bricksandSW drain pipe completeasper standard design. |
| 68 | Constructing Septic tank with brick work in cement mortar 1:4(1 cement and 4 coarse sand), cement concrete 1:2:4 (1cement,2 coarse sand, 4 graded stone aggregate 20 mm. nominal size ) in foundations/base, baffle walls in half brick masonary in 1 : 4 (1 cement : 4 coarse sand), RCC slab 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm. nominal size ) 12 mm. thick cement plaster 1:3 (1 cement, 3 Coarse sand ) inside finished with a floating coat of neat cement. The rate includes all necessary excavation in all kind of soils, refilling and disposal of surplus earth with in the site or away from site as directed with out any extra cost including centering,shuttring etc. complete with required Nos heavy duty SFRC type MH/IC covers and frames, vent pipe and all other assessories as per the drawing. |
| 69 | Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. earth continuity wire and piano type switch etc. complete in all respects. |
| 70 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 140( B) but in PVC conduit with 1.5 sq. mm FR PVC insulated multisrand copper conductor cableas earth wire drawn inside the conduit. |
| 71 | Wiring point for 5 amp Plug with 141( B) but in PVC conduit with 1.5 sq. mm FR PVC insulated multisrand copper conductor cableas earth wire drawn inside the conduit. |
| 72 | As in item 221 (B) but in 20 mm dia (2mmthick) PVC conduit with one no. 2.5 sq. mm for PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit. 2x4.00+ 1x2.5 Sqm |
| 73 | Supply and wiring of submain in PVC insulated 1100 V grade single core Copper conductor cable in heavy gauge rigid PVC conduit partly laid in slab along with reinforcement before concreting with continuity wire etc. complete in all respects. 2x6 Sqm+1x2.5 Sqm |
| 74 | Supply and wiring of sub main with two number 10 Sq.mm. FR PVC insulated 1100 V grade multi strand single core copper conductor cable in 25 mm. dia heavy duty (2 mm, thick) PVC conduit with one No. 6 Sq.mm. multi strand single core copper conductor cable as earth continuity wire drawn in conduit partly conccaled in wall and partly laid in slab along with reinforcement before concreating including matching color wash etc. complete in all respects. |
| 75 | Supply and fixing of factory wired, HPF box type, fluorescent tube light fitting suitable for 1 x 40 watt fluorescent tube complete including tube etc. on surface complete in all respect. But with electronic ballast. |
| 76 | Supply and fixing of electronic fan regulator 120-280 V ISI marked, on the existing switch board including making connection, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge. |
| 77 | Supply and fixing of 240 volts \"L\" series miniature circuit breaker in existing MCB, DB complete with connections as required. |
| 78 | Supply & fixing of 63 Amp. SP ISOLATOR (10KA) |
| 79 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 1.75mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. |
| 80 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 81 | Supply of Ceinlling fan 48\"\" Usha/Khaitan/ Orient/Bajaj ISI mark with resistance type speed requlator. |
| 82 | Supply of fan/fresh air fan |
| 83 | S/F LED BULB 9 WATT |
