Tender For Vidhayak Niwas 2, Old Situated House No. 34B, Replacing The Floor And Wall Tiles Of All The Bathrooms, Replacing The Shatigrast Sewer Line And Payjal Line, Replacing The Shatigrast Fittings And Fixtures And Installing New Fittings, Related Civil Works - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1 2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (D.A.R No-15.56) 3 12 mm cement plaster of mix: 1:4 ( 1 cement 4 coarse sand) (DAR No- 13.4.1) 4 Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DAR No- 18.8.2 5 Providing and fixing of CPVC gate valve of 20mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 6 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.A.R No- 11.38) 7 Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm 8 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge 63mm dia. 9 Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 10 Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 11 Providing and fixing of Nahani Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 12 Providing and fixing C.P. brass wall mixture with tele phonic shower 3 in 1 (L&K make code 0457 ) or Equivalentquality. 13 Supply and Fixing C.P. brass bib cock 15mm. dia. Long body L&K 0047 including supply of all materials, labour, T&P etc. required for proper completion of the work. 14 Providing and fixing C.P. brass angle valve l&Kfor basin mixer and geyser points of approved quality 15 mm nominal bore. 15 Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete. 16 Providing and fixing of glass shelf 22 Acrylic make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work. 17 Providing and fixing of glass corner, CERA or Equivalent Make, including supply of all material labour T&P required for proper completion of the work. 18 Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work. 19 Providing and fixing white vitreous china Single Piece water closet Perryware make Camel (C8856 (S-220) size of 645x340x680mm, with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ). 20 Providing and fixing Cera make white vitreous china Anglo Indian type water closet (UNIVERSAL 570x460x380mm with S trap) with, C.P. brass angle valve, Cera make PVC cistern complete with fittings, PVC connection pipe 15mm dia 450mm long including flush pipe, with manually controlled device (handle lever), confirming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. including supply of all materials, labour and T&P etc for the proper completion of the work includingremoval of old pan etc. if so required. 21 Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal CERA MAKE with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work. (WHB Model :Cornet Size, 630x450mm, Cat No- S2040104). 22 Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete. 23 Providing and fixing CP towel Rod OF L&K or equivelent Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete. 24 Providing and fixing CP towelring L & K or equivelent fittings arrangement of approved quality. 25 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 26 Providing and fixing C.P. Soap Dish l&k make including supply of all material , labour T&P etc. complete. 27 Providing and fixing C.P. brass OVER HEADshower with arm heavy qualityL&K 0668) with 15mm inlet:100 mm diameter 28 Supply and fixingof steel kitchen sink 610X510X200 mm without drain board,with C.P.jali, P.V.C. waste pipe,bracket,including supply of allmaterial, labour, T&P etc. for proper completion of work. 29 Providing and fixing C.P. brass stop cock (concealed) of standard design and ofL&K make 15 mm nominal bore. 30 Providing and fixing of C.P brass extention piece of 15mm dia in different legnth of approved brand and quality. 31 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) DAR No- 21.1.2.2 32 Providing and fixing 19 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Typer II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc complete as per architecturat drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. DAR- 21.2.1 33 Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen platforms, vandy counters. Window sills facias and similar locations of required size, approved shade colour and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, Area of slab over 0.50 sqm DAR. No- 8.2.2.2 34 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement morter 1:2 (1 cemnt;2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindance E.C. 20% with 1% concentration. D.A.R No- 2.35.3 35 Providing and Fixing of cup board with mica laminated 19mm HDHMRboard out side with one side decorative lamination .depth of cupordis 30 cm back side of cup board made by 12mm thick HDHMRboard including cost of all accessories such as handle, hinges, lock etc complete work. 36 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats). (D.S.R No-13.81.1) 37 Disposal of malba from work site to 15km away out of muncipal limits, including its loading unloading labour T&P etc,. Complete work.
