Tender For Changing The Shatigrast Main Gate In Residence No. 14 Of Gautampalli Colony, Installing View Cutter On Boundary Wall, Changing The Shatigrast Doors/Panes Of Bathroom, Breaking The Damaged Plaster Of The Outer Part Of The Main Building And Bound, lucknow-Uttar Pradesh

Tender for Changing the Shatigrast main gate in residence no. 14 of Gautampalli colony, installing view cutter on boundary wall, changing the Shatigrast doors/panes of bathroom, breaking the damaged plaster of the outer part of the main building and boundary wall and plastering it again along with painting and other unnecessary repair works. - Dismantling old Plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dummping ground within 50 metres lead. DSR No.-15.56, Rs. 43.17 2 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR N0-10.2 3 Providing & Fixing UV Stabilised Fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8 mm dia, G.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3%, ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air Pockets and shall Conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as Specified. DSR No. 12.47.1, Rs. 1107.00 4 Providing and fixing 35 mm thick ISI marked flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. including ISI marked Stainless Steel butt Hinges with Necessary Screws.DSR N0-9.21.1, rs.1890.08 5 5.0 mm thick glass panes (weight not less than 12.50kg/sqm) DSR No. 9.7.7.2, Rs. 2054.23 6 12mm. Thick plaster with cement mortar in proportion of 1:4 cement & coarse sand DSR No. 13.4.1, Rs. 282.29 7 Removing white or colour wash by scrapping andsand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR N0 13.88, Rs. 15.60 8 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete.DSR N0-13.80), Rs. 123.27 9 Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade New Work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (Apex Ultima, Weather Coat All guard asian, Berger. (DSR N0-13.47.1), 135.16 10 Painting with synthetic enamal paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR No.13.62.1, Rs. 178.73 11 Disposal of moorum/building rubbish/malba/similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping groung for lead upto 10 KM for all lifts, complete as per directions of Engneer-in -charge.DSR No. 1.1.18, Rs. 494.10

INR 770 /-

INR 36900.0 /-

INR 3.69 Lakhs /-