Tender For Civil Maintenance Work In Various Houses From House No. A-101 To A-606 Of La Place Colony. - Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is: 3564, Embossed On Th, lucknow-Uttar Pradesh

Tender For Civil Maintenance Work In Various Houses From House No. A-101 To A-606 Of La Place Colony. - Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door with from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc complete.(DSR -9.84) 2 Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipe and fitting with one step CPVC solventcement and testing of joints complete as per direction of Engineer In charge . Internal work -Exposed on wall (15mm nominal outer dia pipe )DSR- 18.7.1 3 Providing amd fixing Chlorinated Polyyinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plains & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipe and fitting with one step CPVC solventcement and testing of joints complete as per direction of Engineer In charge . Internal work -Exposed on wall (20mm nominal outer dia pipe )DSR- 18.7.2 4 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apperture with matching wood beading. DSR No-9.7.8. 5 Providing and fixing ISI marked M.S pressed butt hinges bright finished with necessary screws etc complete. 125x65x2.12 mm(DSR -9.55.1) 6 Providing and fixing ISI marked oxidised M.Ssliding doorbolts with nuts and screws etc complete.(Copper oxidised as per IS 1378). 300x16 mm(DSR -9.62.1) 7 Providing and fixing ISI marked oxidised M.Ssliding doorbolts with nuts and screws etc complete. (Copper oxidised as per IS 1378). 250x16 mm (DSR -9.62.2) 8 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).(DSR -9.53) 9 Providing and fixing ISI marked oxidised M.S Tower bolt black finish (Barreltype) with necessary screws etc complete. (Copper oxidised as per IS 1378). 250x10 mm(DSR -9.63.1) 10 Providing and fixing ISI marked oxidised M.S Tower bolt black finish(Barrel type)with necessary screws etc complete(Copper oxidised as per IS 1378)200x10 mm.(DSR -9.63.2) 11 Providing and fixing ISI marked oxidised M.S handles conforming to IS: 4992 with necessary screws etc complete.(Copper oxidised as per IS 1378). 125 mm (DSR -9.66.1) 12 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete.250x10 mm(DSR -9.74.1) 13 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete. 200x10 mm(DSR -9.74.2) 14 Providing and fixing brass bib cock of approved quality (15 mm nominal bore)DSR-18.15.1 15 Providing and fixing brass stop cock of approved quality (15mm nominal bore)DSR-18.16.1 16 Providing and fixing ball valve(brass ) of approved quality , high or low pressure , with plastic floats complete:( 15 mm nominal bore)DSR-18.18.1 17 Providing and fixing ball valve (brass ) of approved quality , high or low pressure , with plastic floats complete:( 20 mm nominal bore)DSR-18.18.2 18 Providing and fixing ball valve brass (brass ) of approved quality , high or low pressure , with plastic floats complete:( 25 mm nominal bore)DSR-18.18.3 19 Providing and fixing C.P.Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( DSR-18.49.1) 20 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810 gms , ( 15 mm nominal bore) DSR-18.50.1 21 Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 ( m15 mm nominal bore)DSR-18.53.1 22 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35mm thick including ISI marked Stainless Steel butt hinges with necessary (DSR -9.21.1) 23 Providing and fixing water closet squatting pan (indian type W.CPan) with 100 mm sand cast Iron P or S trap. 10 liter low level white P.V.C flushing cistern. Including flush pipe, with manually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures complete. Including cutting and making good the walls and floors wherever required. (17.1) white vitreous china orrisa patter w. c. pan of size 580x440 mm with integral type foot rest (DSR-17.1.1 ) 24 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillor taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.(17.7) white vitreous china wash basin size 630x450 mm with a pair of15 mm c p brass pillar tapes(DSR-17.7.1 ) 25 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. DAR (17.7) white vitreous china wash basin size 550x400 mm with a pair of15 mm c p brass pillar taps.DAR (17.7.3) 26 Providing and fixing White Vitreous china pedestal forWash basin completely recessed at all the back for the reception of pipes and fittings. (DSR-17.8) 27 Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 meter long with S.S. trangular plate to Eureopean typeW.C. of quality and make as approved by Engineer-in- charge.(DSR-17.16A). 28 Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231with all fittings and fixtures complete.(17.18). 10liter capacity -white(DSR-17.18.1) 29 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.DAR (17.28).semi rigid pipe 32mm dia.DSR (17.28.1.1 ) 30 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (DSR-17.31). 31 Providing & Fixing white vitreous china water closet orissa pattern W.C squatting pan of size 580 X 440mm (indian type).(17.13.2). 32 Renewing Float glass panes of nominal thickness 4mm(weight not less than 10kg/sqm) and refixing existing wooden fillets. DSR-14.7.1. 33 Providing and fixing PTMT stop cock,15mm nominal bore,86 mm long weighing not less than 88 gms of approved quality and color.(18.55.1). 34 Providing and fixing PTMT soap dish holder having length of 138mm,breadth 102mm,height 75mm with concealed fitting arrangements,weighing not less than 106gms.(18.65). 35 Providing and fixing PTMT concealed stop cock,15mm nominal bore,108mmlong weighing not less than 108gms of approved quality and color.(18.55.3). 36 Providing and fixing C.P brass shower rose with 15 or 20mm inlet:100mmdiameter.(18.22.1).

INR 680 /-

INR 20000.0 /-

INR 2 Lakhs /-