Zone-1 Chhata Room No. 67, Repair Work Of Gandhi Ashram Located In Nawalganj. - DismentlingExisting damage PlasterIncluding disposal of refuse as directed by E/IC with in a distance of 60 meters etc. all complete. {Chapter No. 17 S.I. No.16 (706)} 2 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (17-Chapter SI.No.16) 3 Earth work in Excavation in foundation in ordinary soil (loam, clay or sand) including, lift up to 1.50 m and lead up to 30m and including filling watering and ramming of excavated the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge up to a distance of 30 M form the foundation trenches. (Rate including Royalty of earth also) (4-Chapter Si.No.1) 4 Cartage of Malva, Silt, sludge kankar and other disposable organic material etc. all complete with labour T&P including cartage of 8 km. (Chapter No.3 Si.No.8) 5 Providing and laying Cement Concrete in 1:5:10 (1 cement :5 fine sand 10 Stone ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter Sr.No.1) 6 Class-150 Brick Work in 1:4 Cement and Coarse Sand, mortar in foundation and plinth including supply of all materials, laborand tools and plants, etc. Required for proper completion of the work. ( Chapter No. 06 Sr.No. 2) 7 Class-150 brick work in 1:4 cement and coarse sand, mortar in Super Structrure including supply of all materials, laborand tools and plants, etc. Required for proper completion of the work. ( Chapte No. 06 S.I. No. 2+5) 8 12mm thick cement plaster in single coat of fair side of single of half brick wall forinterior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive.(c) 1 Cement : 4 Coarse sand.(Chapter No.13 Si.No.1) 9 Providing and Stacking 22.40-53mm guage stone aggregates of specific sizes to water bound macadam specification including etc all complete.(NS) 10 Supply and Laying stone dust etc all complete. 11 Consolidation/Compaction of stone ballast 10cm thick (loose) coat including repairing of patches picking up to old surface spreading, ballast making medhies to retain water and carriage of metal upto 30m carriage of water upto 200m maintenance of barriers and all labour T&P including road roller charges etc. required for proper completion of work the stone ballast is to be supplied to the contractor free of cost at site. 12 Supply and laying ofShaped precast Interlocking tiles of thickness 60mm thick Rubber Molded Coloured (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mmn thick local sand base levelling and dressing of surface to required level and slope etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. (Tiles shape decided by Engineer-in-charge with ISI Mark){Chapter No.20 Si.No.17(C)} 13 R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 in R.C.C Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 bwgi binding wire and including necessary centring and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150.(5-Chapter Si.No.8) 14 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (b) 10mm to 12mm tor.(Chapter No. 10 As per M.R.) 15 Supply and Fixing of M/S fabricated Grill/Stair case including supply of steel and its wastage including cost of Bolt/Nut if required for proper completion of work including febrication of holes in Grill/Stairs case railing etc. all complete. (Chapter No.10 Sl No. 502(c) 10-21) 16 Providing and fxing lSl marked flush door shutters conforming to lS : 2202 (Part l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including ISI marked Stainless Steel butt hinges with necessary screws. (A) 35mm Thick. (Excluding cost of Flttings) (Chapter No.9 Si.No.1-9.21.1) 17 Fixing Door chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. (Chapter No.9 Si.No.7a-14.2.1) 18 Providing and fixing water closet squatting pan (Odisa type W.C. pan) with 100mm Sand Cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required : White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with with integral type foot rests. (Chapter No.24 SI. No.1) 19 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standared size C.P. brass flush pipe, spreaders with union and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fitting and cutting and making good thg walls and floors whereever required: Single half stall urinal with 5 litre PVC. Automatic flushing cistern. (Chapter No.24 Si.No.6A) 20 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 32mm nominal outer dia pipes.(Chapter No.23 Si.No.2D) 21 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc.(d) 15mm nominal outer dia pipes.(Chapter No.23 Si.No.2A) 22 Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete.110mm diameter. (Chapter No.23 SI.No. 30(iii)) 23 Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete.140mm diameter. (Chapter No.23 SI.No. 30(iv)) 24 Kota stone slab flooring over 20 mm (average) thick base laid over and joined with gray cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) :25 mm thick. (Chapter No.14 Si.No.12-11.26.1) 25 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - exposed face fine dressed with rough backing. 30 mm thick (Chapter No.18 Si.No.7) 26 Providing and Laying Vitrified Tiles 500x500mm Size(thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Including 75mm thick base with concrte 1:4:8 complete as per E/I etc. all complete. (Chapter No.14 Sr.No.20) 27 Supply and fixing 6mm (1/4) thick Chine white glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar and approved coarse sand mortar finished with whitecement jointed and polishing complete including supply of all materials, labor for porper completion of the work. (Chapter No.14 S.I. No. 628) 28 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. including curing the cost of all material, labour, T&P etc. complete. (Chapter No.15 Si.No.1) 29 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. (Chapter No.15 Si.No.5) 30 Paint of the two coat over primer coat wood surface and etc. all complete.(15-Chapter Si.No.8+10+11) 31 Paint of the two coat over priming coat including cost of priming coat on steel work etc all complete.{15-Chapter Sr.No.9+10+11} 32 Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: (White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps) {Chapter No.24 Si.No.5A} 33 Providing and fixing C.P. brass bick cock fo approved quality confirming to IS:8931. 15mm nominal bore. (Chapter No.23 Si.No.19a) 34 Providing and fixing C.P. brass stop cock (concealed of standard design and of approved make conforming to IS:8931.15mm Nominal bore. (Chapter No.23 Si.No.22) 35 Supply & Fixing 1000 Ltr P.V.C. Water Storage Tank Syntax or equivalent etc. all complete. (None Scheduled) 36 Supply and Fixing of Light Fitting Switch Board. (None Sheduled) 37 Supply and Fixing Wiring of Light Point. (None Sheduled) 38 S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. 39 Supply & Fixing of wiring Sub Main. 40 Supply & Fixing of Plug Point 15Amp. 41 Supply & Fixing of 27watt. CFL etc. all complete. 42 Lettering & Painting of wall etc. all complete. 43 Sub Total (A) 44 Deduction Cost of old brick 45 Deduction Cost of old brick bats 46 Sub Total (B) 47 Sub Total (A-B) = (C) 48 Add/Deduction Rs. For Estimate Figure Amount Match 49 Grand Total
