Tender For Repair Work Veterinary Hospital Pinan - Excavation of soil upto 1.5 m depth in foundation, trench, drain, tamping of bottom, watering, dressing of sides, removal of excavated soil, filling of voids after foundation and disposal of remaining soil upto a distance of 50 m In ordinary/soft soil Unit : Cubic metre2 Cement Concrete 1 cement : 4 gravel and 8 ballast / 1 cement, 3 gravel and 6 ballast stone of nominal size 40 mm in foundation including tamping and tamping etc. 1:4:8 Unit : Cubic metre3 Construction of floor/road with interlocking cement concrete blocks (Grade M-30, Manufactured from fully computerised automatic stationary hydraulic vibropressed machine and batching plant of class A as per BS 6717:2001) including supply and installation of edge blocks. In case edge block is not provided, 0.08 cu.m./running meter of rate of cement concrete 1:1.5:3 should be deducted. For 60 mm thickness Unit : Square meter4 Breaking of cement concrete floor and throwing of broken material upto 50 meters distance. Unit : Square meter5 Polished Kota stone flooring over 1:4 cement gravel mortar for 20 mm thickness, applying and grinding of scuttle (minimum 3 times) and joining of joints by filling them with cement slurry etc. For 901 to 2300 sq. cm. Unit : Square meter6 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concretee block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%]7 Providing and fixing Square bars or other flat welded to window, ventilatiors etc.8 Installing and supplying iron mesh of 14 mesh, 24 gauge in iron window and fixing it with 20 X 3 mm beading and tightening it with screws. Unit : Square metre9 Providing and fixing fully panelled/partly panelled/double leaf shutter frames for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - A and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete 30mm thick :Shesham wood grade I10 Foundation and Plinth First Class Brick Masonry in Cement - Gravel 1:6 or 1:8 mortar including closing of side gaps and tamping. Cement mortar 1:6 additional amount for masonry work in superstructure upto 4.5m height from plinth level. Unit : Cubic metre11 Cement plaster on wall using cement-gravel mixture in 1:6 ratio including ramming of joints and regular curing for 14 days.20 mmUnit : Square metre12 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 13 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).14 Laying of stone in foundation and plinth in cement-gravel mortar, including closing of side cracks and tamping etc. Cement gravel 1:6 Unit : Cubic metre15 Laying of stone in foundation and plinth in cement-gravel mortar, including closing of side cracks and tamping etc. Cement gravel 1:6 extra add-on amount, superstructure masonry, Item No. 21 to 24, for plinth and thickness more than 30 cm upto 4.5 m height. Unit : Cubic metre16 Cement concrete 1:2:4 mixture of 1 cement 2 gravel 4 stone or brick aggregate of 12 m., mixed with aggregate, pouring, ramming, compacting and tamping etc., in 50 mm thickness. Stone aggregateUnit : sq. metre17 Rough Chisel dressed Sandstone 35 mm thick flooring of approved shade setover 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointingwith cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : Red sand stone (Karauli stone)18 Removal of doors, windows, skylights including door frames and holding strips. Unit : Nos19 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of garbage to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)20 Breaking a stone wall, laying a slab of broken stones and throwing unusable material up to a distance of 50 meters. Unit of cement mortar: cubic metre.21 Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C22 Applying enamel paint in 3 layers to get uniform shine (To give even shade) Creating even surface on new work/old work Unit on new work : square metre23 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface andnecessaryrepairs. Colour Change24 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).25 110mm diameter PVC Pipe laying and other necessary materials Unit: Meter26 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : i) first layer of slurry of cement @ 0.488 kg/square meter mixed with water proofing cement compound. @0.253 kg//square meter .This layer will be allowed to air cure for 4 hours.ii) Second layer of slurryof cement @ 0.242 This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry.
