Repairs To Day To Day Items, Roof Treatment, Cleaning Of Pvc Service Tanks And Replacement Of Roof Sheets Of Zone B (Maduravoyal, Saf Games, Ts Avadi, Inas 313, Ncb, Nsd, Nofra-Ii) Area Under Age(I) Navy Chennai-Attendingminor complaints of plumbing and sanitary fittings includingwater leakage from taps, WC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement ofBrass spindle, M seal, Screws ,nailing ,washers, check nuts, tightening of fittings of flushing cistern, cleaning of bolttle traps etcto makeit functional and stop leaking of any type of plumbing and sanitry items as in day to day maintainence work complete all as directed.Note:-(i)Ser No 2 to 21Supply only items will be measured and paid separately and fixing rate, screws, nails, plugs and greases are included in the quoted rate.(ii)In case Daily manpoweris not arranged as per direction of Engr-in-charge, recovery at double the market rate or double the CA rate whichever is higher will be made:- 2 Supply only20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) 3 ,-Ditto- all as per item No.2 above but 25 mm bore ball valves high pressure of PTMT 4 Supply only600mm longPVC connections 15 mm size with PTMT nuts 5 Supply onlyFancy type CP stop/angular cock 15mm dia 6 Supply onlyFancy type bib cock 15mm dia CP 7 Supply onlyFancy type pillar cock 15mm dia CP 8 Supply onlyFancy type shower 15mm dia CP 9 Supply onlySwan neck Sink fancy type tap 15mm dia CP 10 Supply only PTMT stop/angular cock 15mm dia 11 Supply onlyPTMT bib cock 15mm dia 12 Supply onlyPTMT pillar cock 15mm dia 13 Supply onlyPTMT shower 15mm dia 14 Supply onlyPTMT Swan neck Sink tap 15mm dia 15 Supply onlyFancy type 600 mm long towel rail 16 Supply onlyFancy type towel ring CP 17 Supply onlyFancy type SS Soap dish 18 Supply only600mm long x 180mm wideGlass shelf 19 Supply only300mm corner glass shelf 20 Supply only15mm dia of CP health faucet and 1mtr long flexible pipe 21 Supply only15mm dia of PTMT health faucet and 1mtr long flexible pipe 22 Attending minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard, drawers and the like door springs, etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functning to seating over with Each other with tightening of screws/nails, doorsprings etc, including petty repairs material like screws/nails, plug, grease etc to make it functional as in day to day maintenance work complete all as specified and directed.Note:-(i)Ser No 23 to 36Supply only items will be measured and paid separately and fixing rate, screws, nails, plugs and greases are included in the quoted rate.(ii)In case Daily manpoweris not arranged as per direction of Engr-in-charge, recovery at double the market rate or double the CA rate whichever is higher will be made:- 23 Supply only75mm size, Butt hinges, heavy weight, SS, 24 Supply only100 mm size, Butt hinges, heavy weight, SS, 25 Supply only125 mm size, Butt hinges, anodised aluminium of type B-21 26 Supply onlyaluminium handles cast type anodised for 100 mm 27 Supply onlyaluminium handles cast type anodised for 150 mm 28 Supply onlyStainless steel handles of 450 mm forglass doors 29 Supply only 150mm longaluminium, anodised barrel tower bolts 30 Supply only 200mm longaluminium, anodised barrel tower bolts 31 Supply only 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) complete all as specified and directed 32 Supply only 150 mm size Hasp and staple, safety type, aluminium anodised 33 Supply only75mm long Brass handles, cast type, polished bright handles 34 Supply only150mm longfloor door stopper of Brass 35 Supply only150mm longfloor door stopper of Aluminum 36 Supply only150mm longmortise lock brass type of 4 levers 37 Supply and fixin repair foraluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etccomplete all as specified and as directed. 38 Taking down and refixing the same opening of door Shutters of any descriptionexc 1 sqm but not exc 2 Sqm Each and including easing and adjusting before fixing of door shutter complete all as specified and directed. 39 dittio all as per item No 38 above but with out taking down 40 Taking down and refixing the same opening of door Shutters of any descriptionn exc 1 sqm but Each and including easing and adjusting before fixing of door shutter complete all as specified and directed. 41 dittio all as per item No 40 above but with out taking down 42 Supply and fix for Aluminum powder coated frame with doors shutters, with one or more rebates, Aluminum Partitions sides and middle sections,Aluminum powder coated sliding three track windows offrame with shutters and Fixed types Aluminum ventilators with louvers including fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and directed. 43 Supply and fix foraluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed. 44 Ditto- all as per item No- 43 above but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors includingteak wood beading for wooden doors etc etccomplete all as specified and directed. 45 Supply and fix for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, includingteak wood beading for wooden glazingwindowsin square not exc 0.50 Sqm in Each pane including hacking out old broken glass complete all as specified and directed. 46 Supply and fix for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed includingteak wood beading for wooden glazingwindows in square not exceeding 0.5sqm in Each etcincluding hacking out old broken glass all as specified and directed. 47 Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazingalu windows and fixed with aluminium glazing clips exceeding 0.5sqm in Each complete all as specified and as directed 48 Supply and fix for plain sheet glass,4 mm thick, ordinary quality and glazingaluminum fixed /sliding windows and fixed with aluminium glazing clips exceeding 0.5sqm in Each including hacking out old broken glass all as specified and directed. 49 Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazingdoors and fixed with aluminium glazing clips in square exceeding 0.5sqm in Each complete all as specified and as directed 50 Supply and fix for plain sheet glass, ,5.5mm thick, ordinary quality and glazingdoors and fixed with aluminium glazing clips in square exceeding 0.5sqm in Each including hacking out old broken glass all as specified and directed. 51 M&L for 6mm thick bakilight hard sheet decorative grade 1 (with BWR resin) with decorative face veneers on one side and other side white; and fixed todoors and Partitions etc and fixed with aluminium glazing clips etc complete all as specified and as directed 52 Ditto- all as per item No- 51 above but fixed in repair to aluminiumPartitions and Aluminium doors etc complete all as specified and directed. 53 Supply and fix in repair for75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed 54 Supply and fix in repair for125 mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed 55 Supply and fix in repair for125 mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed 56 Supply and fixin repair aluminium handles cast type anodised for 100 mm complete all as specified and directed 57 Supply and fix in repairaluminium handles cast type anodised for 150 mm complete all as specified and directed 58 Supply and fixin repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed 59 Supply and fix in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed 60 Supply and fixin repair for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed 61 Supply and fixin repairfor 30 mm Width of flaps (when open)Continuous (piano) hinges, brass, bright finish or electrogalvanised 62 Supply and fix in repair for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed. 63 Supply and fix in repair forBrass handles, cast type, polished bright handles 75mm long fixed to plywood or framecomplete all as specified and directed 64 Supply and fix in repair for 150mmRim latch for glass door with two levers, ofbrass body, polished bright. with brass knob or lever handle and fixedcomplete all as specified and directed 65 Supply and Fixin repairs for20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Planstic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work)etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. 66 Ditto as in item No. 65but for25 mm dia complete all as specified and directed. 67 Ditto as in item No.65 but for32 mm dia complete all as specified and directed. 68 Supply and Fixin repairsPPR gate valves (brass insert) outer dia of pipe 20 mm complete all as specified. 69 Ditto as in item No. 68 but for25 mm dia complete all as specified and directed. 70 Ditto as in item No. 68 but for32 mm diacomplete all as specified and directed. 71 Supply and Fixin repairfor 20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) 72 -do- all as per tem No 71 above but 25mm dia.complete all as specified and directed. 73 S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified. 74 Supply and Fixin repairfor low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection all as directed. 75 Supply and Fixin repairforWash basins counter type, vitreous chinaof 550x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling and 1mtr waste pipe all as specified and as directed. 76 S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed. . 77 Supply and Fix in repair forFancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure withhalf turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed . 78 Supply and Fix in repair forFancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy withhalf turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed 79 Supply and Fix for in repairpillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipefixed all as specified and as directed. 80 Supply and Fix in repair for 125 mm dia Fancy type brass CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed . 81 Supply and Fixin repairfor 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. 82 Supply and Fixin repairfor tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed. 83 Supply and Fixin repairfor PVChealth faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tubeand ABS wall hook complete all as specified and directed. 84 Supply and Fix in repair for stainless steel sink 1mm thick made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including 40mm waste coupling , bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm bowl size 510mm x 330mm x 230mm 85 Supply and Fix for 32 mm PVC waste hose Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. Cm for WHB / SS Sinks with coupling of length 0.90 mtr etc complete all as specified. 86 S&F plastic water closet seat cover, black,whiteclosed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deviceas in repairs complete all as specified and directed 87 S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed 88 S&F in repairs Door closer hydraulically of (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed 89 S&F in repairs for 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipecomplete all as specified and directed 90 S&F in repairs for 32/40 mm diachromimun plated waste coupling fixed in WHB/Sinkcomplete all as specified and directed 91 S&F in repairs for parts of double actionshy fun for Vitreousflushing cistern and cleaning of cistern etccomplete all as specified and directed 92 S&F in repairs for parts of Single actionshy fun for PVC flushing cistern and cleaning of cistern etccomplete all as specified and directed 93 S&F in repairs for parts of PVC 15mm float valve with ball for PVC flushing cistern and cleaning of cistern etccomplete all as specified and directed 94 S&F in repairs for parts of Spindelfor Bib tap/ stop cock of half turn type and cleaningetccomplete all as specified and directed 95 S&F in repairs for parts of long body Spindelfor Concealed stop cock of half turn type and cleaningetccomplete all as specified and directed 96 Supply and Fixin repairfor PVC OHT Cover with frame thread type with suitable locking arrangementupto 1000 litres capacity complete all as specified and directed. 97 Supply and fix stainless steel plate rack kitchen 1 mm thick of size 75 cm x 95 cm with racks and shelfs including complete fixing arrangements as per manufacturers instructions and taking down the old stainless steel plate rack and taken as credit complete all as specified and as directed. 98 Supply and fix cabinet mirror of size 335x140x430mm with approved colour complete including necessary fixing arrangements and taking down the old mirrorand taken as creditcomplete all as specified and as directed. Make -Water Tech 99 Demolition of cementConcrete (unreinforced) of any description and in anypositionnot otherwise specifically providedand including removing of old APP membrane and plaster etc complete all as specified and as directed. 100 Material and labour for PCC Padding (1:2:4) type B-0 (12.50 mm graded aggregate) avarage thickness as specified to bring uniform slope in floors/ roof slab and including over apply with brushing neat cement slurry with 3.0kg/Sqm after cleaning of existing roof top surface with water etc complete all as specified and directed. 101 Material and labour for 10mm thick rendering on roof top surfaces in CM 1:3 with using withWPC @ 3% by weight of cement. Finishing the even and smooth surface etc complete all as specified and directed. 102 Material and labour for applyinga tack coat of hot bitumen 85/25 @1.20 Kg/sqm over compatable primer at 0.40 ltr/Sqm complete all as specified and directed. 103 Cutting chases, pinning in. making good to facings for inserting galvalume sheet/ APP Membrane into the e brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to the existing surface, cutting not exc 10 cm girthcomplete all as specified and directed. 104 Material and labour for APP polymeric water proofing minimum weighing3.00 Kg per sqm and minimum 3 mm thick reinforce with polyster non wooven fabric laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over and including cleaning plastered surfacesand applying two coats of solar reflector aluminium paint on APP membrane complete all as specified and directed. 105 Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed. 106 M & L for brick work with fly ash bricks old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6)complete all as specified and directed. 107 Taking down cement Plaster , any description, on brick walls or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 108 Material and labour for rendering 15 mm thickon brick or concrete external wall surface in CM (1:4) onfair facesandfinishing the surface fair and even and using WPC 3% by weight of cement as per manufacturer instructions complete all as specified and as directed. 109 Supplied only Integral water proofing compoundcomplete all as specified and directed. 110 Material and labour for Preparation of new surfaces of wall and applying two coats of 100% anti fungal acrylic emulsion paint over one coat primerall as per manufacturer instruction and including necessary scaffoldings upto G+4etc etc complete all as specified and directed.(The makes of exterior grade acrylic emulsion shall be : Asian Paints Apex Ultima, Nerolac paints Excel Anti Peel Emulsion, ICI Dulux Weather Shield Max / Ultra Clean Emulsion, BergerWeather Coat All Guard Emulsion 111 S&F in repair PP-R Gate valves (brass insert) for 32 mm dia bore pipecomplete all as specified and directed. 112 Supply and fix for PVC pipe in repair 110mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 6mm dia round iron stays, including bolts and nuts every 1.5mtr interval and securing ends of stays to wall or roof upto G+8 Stories complete all as specified and directed. 113 Supply and fix for PVCbends/ shoes any radius bore of dia 110mm with access door complete all as specified and directed. 114 Disconnecting existing tanks , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required andincludingCleaning repairing, etc reconnecting and re-fixing in the same position. capacity of tank exc 250 ltrs and not exc 500 ltrs complete all as specified and directed. 115 Disconnecting existing tanks , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required andincludingCleaning repairing, etc reconnecting and re-fixing in the same position. capacity of tank exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed. 116 Supply and fix for rotational moulded polyethylene water storage tank of 1000 ltrs capacity (cylindrical verftical with closed top) including dismantling of existing tank including all fittings i.e tank nipple,of 25mm dia Ball brass valves, high pressure, with polythene float and flynutetc make- SINTEX hoisted and fixed in position complete all as specified and directed. 117 Supply and fix for rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical verftical with closed top) including dismantling of existing tank including all fittings i.e tank nipple,of 20mm dia Ball brass valves, high pressure, with polythene float and flynutetc make- SINTEX hoisted and fixed in position complete all as specified and directed. 118 M&L for 10mm thick rendering on roof top surfaces in CM 1:3 with using withWPC @ 3% by weight of cement. Finishing the even and smooth surface including taking downexisting surface and opening of cracks and cleaning of existing roof top surface with water etc complete all as specified and directed. 119 M&L for Cleaning of roof top/sunken new or old surfaces and clean/ cutting of existing cracks and filling of Dr fixit Code No 190 Roof seal flex andapplyingone or more coat of Dr fixitCode No 148 Roof seal@ 0.9 ltr/ Sqm complete all as specified and directed. 120 Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. 121 Dismantling wrought iron or mild steelbwork of any description not otherwise provided for complete all as specified and directed. 122 Supply and fix forrolled sections as in main or cross beams, rafters, purlins of specifed angular/tubular section, beams or channel sections with flange plates caps, bases, cleats and other connections Fe-410 W (Gde E-250) quality B complete all as specified and directed. 123 Supply and fix for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screwsas in roof/sunshade etc all complete all as specified and directed. 124 Material and labour for preparation of new steel surfaces over 10 cm width or girth andapplyingtwo coats of polyurethane paint over a coat of polyurethane primeretc complete all as specified and directed. 125 Removal of demolished materials/debris to a distance exc 1.50 KMbut n exc 5.00 KM complete all as specified and directed.
