Tender For Repair And Maintenance Work At Govt.Ambedkar Hostel Salumber - Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engi, salumber-Rajasthan

Repair And Maintenance Work At Govt.Ambedkar Hostel Salumber - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. IN CEMENT MORATAR 2 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 3 BrickworkwithF.P.S.bricksofclass designation75insuperstructureaboveplinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) 4 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.RAJASTHAN BLACK 5 Wallpaintingwithplasticemulsionpaintof approvedbrandandmanufacturetogivean even shade including all scaffolding: Oldwork (One or more coats ) 6 Paintingwithsyntheticenamelpaintof approvedbrandandmanufactureto givean even shade : Two or more coats on old work 7 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 8 Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished : 20 mm thick 9 Providing and fixing to existing door frames 24mm thickfactorymadePVCdoorshuttersmadeof stilesandrailsofauPVChollowsectionofsize 59x24mmandwallthickness2mm+/-0.2mm withinbuiltedgingonbothsides.Thestilesand rails mitred and joined at the corners by means of M.S.galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mmand stainlesssteelscrews.Thestilesoftheshutter reinforced by inserting galvanized M.S.tube of size 20x20mm and 1mm +/-0.1mm wall thickness. The lockrailmadeupof‘H’section,auPVChollow sectionofsize100x24mmand2mm+/-0.2mm wall thickness fixed to the shutter stiles by means of plastic/galvanizedM.S.’U’cleats.Theshutter frame fitted witha uPVCmulti-shamberedsingle panel of size not less than 610mm, having overall thickness of 20mm and 1mm +/- 0.1mm wall thickness. The panels fitted vertically and tie bar at twoplacesbyinsertinghorizontally6mm galvanizedM.S.rodandfastenedwithnutsand washers, complete as per manufacturer’s specificationanddirectionofEngineer-in-charge (For W.C.and bathroom door shutter). 10 Providing and fixing 1st quality standard white, grey,ivory,fumeredbrown,lightgreen,light blue and other light shades glazed tiles confirmingtoIS:13753&IS:15622ofsize 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tilecomplete(excludingthecostofcement plaster on walls and pillar). 11 Renewing glass panes,with putty and nails wherever necessary.Float glass panes of thickness 4mm 12 Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. 13 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:30 mm thickdecorative teak veneer both side 14 P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :Fire clay glazed kitchen sink (I.S 771-1985Marked) size 600 x 450 x 250mm. 15 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). 16 Providingandapplyingwhitecementbased putty overplasteredsurfacetopreparethe surface even and smooth completeNew Plastered Surface (three or more coats) 17 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 18 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 19 P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) size 510mm 20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) havingthermalstabilityforhot&coldwater supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenchingrefilling&testingofjointscomplete as per direction of Engineer in Charge. (External work). 21 15 mm nominal size 22 25 mm nominal size 23 P & F Ist quality WVC Urinal (IS : 2556 Mark) with 25 mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screw etc. Complete Flat back (small) or half stall size 456 x 355x 265mm 24 P&F WVC wash basin (Ist quality (IS : 2556 Mark) of approved make with C.I. brackets duly painted, 1 no. 15 mm. C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm 25 P & F bib cock ( IS : 8931 mark) superior quality of approved make C.P. brass bib cock, 15 mm nominal bore. 26 P & F rigid PVC Pipe (IS : 4985 mark) class II/ ( 4 Kg. /Cm2) approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant 110 mm dia 27 P&F PVC pipe fittings ( IS :4985 mark) of approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant 28 Plain Tee 110 mm dia 29 Bend 87.5 110 mm dia 30 Pipe Clip 110 mm dia

INR 500 /-

INR 12500.0 /-

INR 6.25 Lakhs /-