Tender For Construction Work Of Tin Shed For Sitting Of Advocates In The New Court S. Rao Premises Of The External Court Of District Court Hathras. - Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/ manual means.S.I.NO. 251 (Excluding Cost of GST) 2 Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. S.I.No. 8 Chap. 4(Excluding Cost of GST) 3 Dismantling of girders, trusses and other steel work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).(Excluding Cost of GST) 4 Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.S.I.No. 275(a)(Excluding Cost of GST) 5 bricks of class designation-100 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) DSR No. 6.1.1(Excluding Cost of GST) 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR No. 6.4.1(Excluding Cost of GST) 7 Providing and laying D.P.C 40 mm thick with Cement concrete Consisting of 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 approved 10 mm graded Stone grit) and including water proofing martreial as approved by the Engineer-In-Charge in the proportion as specified by manufacturer. S.I.NO. 361(B)(Excluding Cost of GST) 8 12 mm cement plaster on brick work with cement mortar of mix upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) S.I. No. 584(Excluding Cost of GST) 9 Distempering (Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all material, Labour, T&P etc. complete required for proper completion of the work. S.I.NO. 649+650 (Excluding Cost of GST) 10 Finishing walls with Acrylic Smooth exterior paint (Apex) of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) S.I.NO. 21 Chap 15 (Excluding Cost of GST) 11 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. including cost of all material, Labour, T&P etc. complete required for proper completion of the work. S.I.No. 6Page 61 (Excluding Cost of GST) 12 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete(b) 40mm thick floor with 20 mm nominal size stone aggregate. DSR NO. 11.3.1(Excluding Cost of GST) 13 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (i) upto plinth level Ch. 5 Sr. No. 7(Excluding Cost of GST) 14 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² As Per SOR Ch. 11 Sr 10 12.1.2(Excluding Cost of GST) 15 Steel wok in built up tubular (round, square or rectangular hollow tubes etc.) truses etc. including cutting. Hoistingfixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finised welded type tubes. S.I.NO. 10 CH.P 10(Excluding Cost of GST) 16 Painting on Steel/G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. SOR Ch15 Sl.No. 5(13.53.1)(Excluding Cost of GST) 17 Mild Steel Iron grill, balcony & staircase railing of a approved qualitiy and drawingincluding supply of all materials, fabrication, labour, T&Pin all respect as per direction of Engineer-in-charge for proper completion of work at site. S.I.NO. 16 CH.P 10(Excluding Cost of GST) 18 Granular Sub-base with Well Graded Material (Table 400.1)(A)By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i)For Grading I Material(Excluding Cost of GST) 19 Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50Kg.) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work.100 mm (Rubber moulded Gray)(Excluding Cost of GST)
