|
| 1 | site clearance( including dewatering desilting ,making of bandh ,)complete all work |
| 2 | Dismentling of old brick work in cement mortar all comp |
| 3 | Earth work in filling including cartage upto 5 km. all complete (analysis rate ) |
| 4 | Cement concrete with 4 cm. gauge brick ballast fine sand of 1.25 F.m. and cement in proportion of 12:6:1 in foundations under floors, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. S.I.No. 273. |
| 5 | M-150 Brick work in 1.6 cement and C sand mortar etc comp. S.I.No.-305(a) |
| 6 | 12mm thick work plaster in 1:4 cement and F sand mortar. S.I.No. 584 (a) |
| 7 | consolidationof GSB by providingwell grade material spreding in uniform size and shape |
| 8 | supply of stone Ballast of 22.4-53mm guage stone blaast including suplly of stone ballast of approved quarry royalty carriage upto site loading unloading stacking testing charges trade tax and other taxes octroi leves etc |
| 9 | S/L of 80mm thick Rubber molded interlocking C.C. tiles (300mpa) leveling and dressing of surface to required proper level and slope with 4cm. Sand cusion & joints filled with local sand including supply of all materials all complete. |
| 10 | Cement Concrete with 2cm. Gauge stone ballast coarse sand and cement in 4:2:1 including supply of all materials, labour, tools and plants etc. S.I.No. 279(a) |
| 11 | M.S iron work of heavy size and section such as trusses channel roof work etc. including s/o all mat lab t & p all comp including rivetting welding where necessary S.O.R 2022 |
| 12 | R.C.C. Work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:2:4 in lintels of door & windows excluding supply of reinforcement and its bending. But including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials,labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.New ItemAs in item 284 above but in slabs |
| 13 | MSTor In plain work such as RCC or R.B. work Including bending forproper shapeand inclu- ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 |
| 14 | S/F of retro reflective sign board (single side) of size 1.5x1.2m rectro reflecting sheeting of HIP grade type-IV,the board shall be fixed on 50mm SS304 grade pipe and reflecting sheet on 4mm thick,ACM aheet of standard make as per MORTH specification. The board shall be fixed using 2 man post 45x45x60 cm cement concrete foundation.the stainless steel joint welding of SS pipe work shall be band and grinder properly including buffing so an to give uniform shining to welded joints including cost of design,febrication,supply,transportation,local shifting erection of signage structure using crane ,all T & p comp machine labour mat proper completion of work (SI 22.41 new item) |
| 15 | Providing and erecting direction and place identification retro reflectorised sign as per IRC-67made of high intensity grade sheeting .sheet fixed overaluminium sheeting 2mm thick area above .90 sqm .supported om MS aingle angle iron post 75x75x6 mmfirmly fixed to the ground by means property designedfoundation with M-15 grade cement concrete 45x45x60cm below ground level all comp. |
| 16 | S/F of raised pavement marker (cat eye)with made of plastic body of RPM Road stud shall be moulded from ASA or HIPS or ABS or any other suitable material app by engineer .the marker shall supported a load of 13635 kg .reflecting panel shall consist of number of lenses containing single or dual prismetic cubesincluding allmaterial ,labour T &P trasportation ,installation and incidental all comp RPM ( with shank) SI 22.06 |
| 17 | deduction cost of brick bats total qty |
