|
| 1 | Dismantling GS Sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and up to a lead of 50 m etc complete as per direction of the Engineer In Charge. |
| 2 | Dismantling old plaster or pointing, raking out joint, cleaning and preparing the surface for re-plastering, re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer In Charge |
| 3 | Providing wood work in frames of false ceiling, partition etc. sawn and put up in position:- a) Local teak wood |
| 4 | Providing and fitting, fixing medium density fiber hardboard sheet ceiling with wooden beading, nails etc complete as per direction of the Engineer In Charge ( Wooden beading will be paid separately) a) 6mm thick sheet |
| 5 | Providing and fixing wooden moulded beading to door and window frames with Iron screws, plugs and priming coat on unexposed surfaces etc. complete : Local teak wood 15 x 12 mm |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost centring and shuttering – All work up to plinth level.i) 1:2:4 ( 1 Cement : 2 Fine Sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 7 | First class brick work in foundation and plinth including cost of all materials as required complete :- (1) In Cement mortar 1 :4( 1 Cement : 4 Sand) |
| 8 | Steel works in built up tubular ( round, square and rectangular hollow tubes etc. ) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i) Hot finished welded type tubes |
| 9 | Providing and fixing whole muli bamboo ( Placed closely) walling strengthening with whole muli bamboo battens (both side) at 600 mm centre to centre and tied with G.I wire 1.0 mm complete as per specification |
| 10 | Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolt and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete(up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer- in- Charge. a) 0.63 mm thick with zinc coating not less than 275 gm/m2. |
| 11 | Providing ridges or hips of width 60 cm overall width plain G.S sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G. I limpet and bitumen washers etc. complete as per direction of Engineer – In – Charge . A) 0.63 mm thick with zinc coating not less than 275 gm/ m2 |
| 12 | 12 mm cement plaster of mix(1) In cement mortar 1: 4 (1 cement : 4 fine sand) |
| 13 | 12 mm cement plaster of mix(1) In cement mortar 1: 4 (1 cement : 4 fine sand) in/c neat cement punning. |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [ Payment shall be made after submission of Test Certificate issued by the Manufacture ] : A) Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture. |
| 15 | Finishing walls with synthetic acrylic smooth exterior paint of required shade of approved brand and manufacture on old work (one or more coates) including preparation of surface as required complete as per direction of the Engineer in charge. |
| 16 | Finishing walls with synthetic acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacture ]: A) New work (two or more coats applied @ 1.67 litter/ 10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm / litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacture ]: a) New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 18 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work (one of more coats), to give an even shadeas required complete as per direction of the Engineer in charge. |
