Tender For Repairing Work Of Parikhana At Bhatkhandey Sanskrit Vishwavidyalay Campus District-Lucknow, 1 Repairing work of Parikhana at Bhatkhandey Sanskrit Vishwavidyalay Campus District-Lucknow 2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In lime mortar 3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 Rmts lead : 4 Of area 3 sq. mts and below 5 Of area beyond 3 sq. metres 6 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 Rmts lead : Of area 3 sq. mts and below 7 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 8 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 9 Dismantling aluminium/ Gypsum/Wooden partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. 10 Disposal of building rubbish/malba/similar unseviceable, dismantled or waste material manually beyond 50 metres initial lead.(Labour Rates as perA.S.IL.K.O CurrentRate.) 11 De-vegetation from monument by removing bushes, trees includingcomplete uprooting from the wall & roofs / structures carefullyincluding suitable chemical treatment to roots to avoid further growthincluding disposal of rubbish with in 50 mtr. Lead as per direction ofEngineer in-charge. 12 Careful removal of existing deteriorated /damaged / weathered lime plaster without damaging the below surfaces and including safety precaution, scaffolding and efficient precise tools for removing of plaster as directed by Engineer-in-Charge 13 Raking out joints of brick masonry surface to the required width and depth, with due care and precaution, by mecahnical /manual means, including preparing and cleaning the surface for re-pointing /refilling of joints, including disposal of rubbish to the 14 Stitching of wide cracks carefully by taking out all loose materials, cleaning with pressure water pumps & air blower and filling 1/3 depth with lime mortar with cross masonry stitching using Brass/SS clamps and chiken mesh with matching bricks in lime mo 15 Chhapai 8-10 mm thick in (1:1:1) 1 Lime putty: 1 Surkhi: 1 Coarse sand on the traditional underpinning(brick masonry),mixed with other traditional material for more strength of mortar mixing withWood Apple,Gum, Black Gram,Molasses & Fenugreek seeds ,including all supply of labour,material & T&P required for proper completion in all respectfilling the core masonry voids very-2 carefully and pushing the mortarin joints.( Labour Quantity Approved by D.G A.S.I , New Delhi,vide Dy.No 5401 Date 15/11/2017.& Labour Rates as perA.S.IL.K.O CurrentRate. ) 16 P & L Lime Sand Plaster with lime sand mortar 1:2 (1 Lime : 2 Sand)including preparation of mortar by traditional practice (by grinding) inspecified course for base coarse and subsequent course & Loi,tamping, beating, till the shrinkage cracks are disappear. The work isdone with all leads as the work is of restoration nature as per Jaipurpractice including adding gur, methi & gugal on old walls includingremoval of all old loose and decade plaster, each coat to be doneafter 3 days of previous coat.45mm thick in four coats 17 P & L Lime Sand Plaster with lime sand mortar 1:2 (1 Lime : 2 Sand)including preparation of mortar by traditional practice (by grinding) inspecified course for base coarse and subsequent course & Loi,tamping, beating, till the shrinkage cracks are disappear. The work isdone with all leads as the work is of restoration nature as per Jaipurpractice including adding gur, methi & gugal on old walls includingremoval of all old loose and decade plaster, each coat to be doneafter 3 days of previous coat.Add extra over item no. 40.5 to 40.6 for Lime plaster work done overcurved/circular masonry work (curved or circular surface.) - 30% 18 Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually on lime base, on ceiling and all flat surface in two coats. First coat applying 3 mm to 4 mm thick and curing properly at least 7 days, second fi 19 Add extra for Lime Kara work (on lime plaster base) other than flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on: 20 Domical surface/spherical/domical ceiling. 21 Curved surface 22 Stucco work in lime, Surkhi, mortar (1:2) as per existing design work/traditional practices by skilled craftsman, the stucco work should be done as per restoration nature, the mortar should be prepared by grinding mill adding gur, methi & gugal.. The thickness varies from 50 mm to 100mm as per the design (minimum rectangular surfacearea to be measured). 23 40mm thick fine dressed stone decorative flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. 24 Red sand stone decorative flooring (50% of total) 25 White sand stone decorative flooring (50% of total) 26 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 27 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 28 Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long 29 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Red sand stone 30 Stone Work (Machine cut edges) for wall lining etc. (veneer Work) upto 10m height, backing filled with a grout of average 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of clamps and pins which shall be paid separately ):Red sand stone - Exposed face machine cut and table rubbed with rough backing. Red sand stone - 30 mm thick gang saw cut stone 31 Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and paintedwith two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). 32 Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gram), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. 33 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats on new work 34 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood 35 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters 36 Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 37 Repairing existing door shutters including cutting the decayed part, replacing it with wooden piece of same design, size and thickness, fixing with screws and nails, making good of all holes, pits, etc with sawdust and resin, applying approved wood preservative and disposal of unserviceable material to the nearest Municipal dumping ground. 38 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 39 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 40 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. 41 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 42 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 43 Making cornice band with ornamental design as per matching with existing design and pattern and as directed by Engineer-in-charge with lime plaster (1 lime : 3 fine sand). Size 100mm wide and 50mm average thick 44 Chemical treatment of sand stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proof. 45 Araish plaster (as per Jaipur practice) 1:2 ( 1 lime : 2 Zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6 mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round. 46 Coloured plain Araish work 1:2 (1 lime : 2 zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round including desired colour stone pigment to match the existing colour. 47 Conservation of fresco paintings in monuments by cleaning of the painted surface from all types of stains, dust, dirt, greasy & oily accretions etc. with the help of suitable chemicals, removal of cracks, consolidation of flaking paint layer and plaster, filling of the lacunae in the plaster, treatment of salt effect and altered paint layer retouching of the lost portions and providing a preservative coating. 48 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) 49 Providing and laying lime concrete terracing on roofs with 20mm to 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime puuty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding off junctions parapet wall complete 50 Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using methi, Gur, Hemp, belgiri, etc including beating and temping 100 to 150mm thick as per specifications. Including dismantling of old deteriorated roofing. 51 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 52 Cast Iron Baluster 53 Cast Iron Parapet Railing 54 Cleaning highly decorative cast iron railing, baluster with at most care by using chemical and fine sand paper under the close supervision tokeep intact the old designs 55 Cleaning highly decorative glass work on doors and windows with at most care by using chemical and very fine brush under the close supervision tokeep intact the old designs 56 Restoration of Jamia glass work by cleaning the surface with the help of chemicals, replacement of the broken/lost glass with the same type, filling of POP along the edges according to the designs and preserve: On floor, Window, Doors. 57 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 58 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 59 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 60 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe i) 32 mm dia 61 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Circular shape 450 mm dia 62 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 63 Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 64 75 mm O.D. 65 100 mm O.D. 66 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 67 75 mm 68 110 mm 69 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 70 75 mm O.D. 71 110 mm O.D. 72 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 73 75 mm 74 110 mm 75 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 76 75 mm Shoe 77 110 mm Shoe 78 Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS - 3989 79 75 mm size 80 110 mm size 81 Providing and fixing heel rest sanitary bend Sand cast iron S&S as per IS - 3989 82 75 mm size 83 110 mm size 84 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989 85 75 mm size 86 100 mm size 87 Providing and fixing terminal guard : Sand cast iron S&S as per IS - 3989 75 mm 88 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 89 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 90 20 mm nominal outer dia pipes 91 25 mm nominal outer dia pipes 92 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 93 20 mm nominal outer dia Pipes 94 25 mm nominal outer dia Pipes 95 32 mm nominal outer dia Pipes 96 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 97 15 mm nominal outer dia pipes 98 20 mm nominal outer dia pipes 99 Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work 100 40 mm dia, nominal bore 101 50 mm dia, nominal bore 102 Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore 103 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 104 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 105 20 mm nominal outer dia pipes 106 25 mm nominal outer dia pipes 107 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore 108 Providing and fixingG.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 109 15mm nominal bore 110 20mm nominal bore 111 25mm nominal bore 112 32mm nominal bore 113 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore 114 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore 115 Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 116 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 117 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 118 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm O.D. 119 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :160/150 mm diameter pipe 120 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 121 Wiring point for light with 1.5 sq mm FRLSH. PVC insulated Multistrand singal core copper conductor cable in PVC conduit with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable as earth wire drawn inside Modular type switch & celing rose,angle/batten holder on 3mm thick phenolic paminated baklite sheet . complete in all respect, with madulor type box &plate, 122 Wiring point for Two waylight with 1.5 sq mm FRLSH. PVC insulated Multistrand singal core copper conductor cable in PVC conduit with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable as earth wire drawn inside Modular type switch & celing rose,angle/batten holder on 3mm thick phenolic paminated baklite sheet . complete in all respect, with madulor type box &plate, 123 Wiring point for Fan/ fresh air fan (Exhaust fan) with 1.5 sq mm FRLSH. PVC insulated Multistrand singal core copper conductor cable in PVC conduit with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable as earth wire drawn inside Modular type switch & celing rose,angle/batten holder on 3mm thick phenolic paminated baklite sheet . complete in all respect, with madulor type box &plate, 124 Wiring point for plugwith 1.5 sq mm FRLSH. PVC insulated Multistrand singal core copper conductor cable in PVC conduit with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable as earth wire drawn inside Modular type switch & soccket . complete in all respect, with madulor type box &plate, 125 Wiring point for Call Bell with 1.5 sq mm FRLSH. PVC insulated Multistrand singal core copper conductor cable in PVC conduit with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable as earth wire drawn inside Modular Bell push for two pin socket etc. complete in all respect, with madulor type box &plate, 126 Add for hight of the ceiling above 4.2 meter in rate of S.I. of wiring point for light, fan,and Exhaust fan for each wiring on surface with copper cable in PVC conduit in all respect 127 Add for Invertor wiring point for light, Fan, Plug point with 1.5 sq mm copper wire etc 128 Supply & wiring of submain with two number 4.00sq mm PVC insulated single core copper conductor in 20 mm dia heavy duty PVC conduit pipe with 1 no. 2.5 sq mm FRPVC Insulated multistrend single core drawn inside the conduit camplete in all respect. 129 Supply & wiring of submain with two number 6.sq mm PVC insulated single core copper conductor in 25 mm dia heavy duty PVC conduit pipe with 1 no. 4.00 sq mm FRPVC Insulated multistrend single core drawn inside the conduit camplete in all respect. 130 Supply & wiring of submain with Four number 10.00sq mm PVC insulated single core copper conductor in 32 mm dia heavy duty PVC conduit pipe with 2 no. 6.00sq mm FRPVC Insulated multistrend single core drawn inside the conduit camplete in all respect. 131 Supply & wiring of submain with two number 2.5sq mm PVC insulated single core copper conductor in 20 mm dia heavy duty PVC conduit pipe with 1 no. 1.5 sq mm FRPVC Insulated multistrend single core drawn inside the conduit camplete in all respect. 132 Supply and fixing of 100 Amp. Four pole change over switch on (40 mm /40 mm) aangle iron frame, incloding the cost of labour , T&P painting and other materil required for proper completion of the work as per direction and satisfaction of Engineer in charge. 133 Supply and fixing of batten /Angle holder complete in all respect. 134 Supply and laying of aluminium conductor PVC insulated armoured served cable 1100 Volts grade at adepth of 750 mm below ground level over a cushion of 75 mm . Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on m.s. clamps etc, of suitable size or as directed by the Engineer - Incharge complete in all respect, the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 135 10.00 Sq mm. Four core cable 136 16.00 Sq mm. Four core cable 137 25 Sq mm. 3.5 core cable 138 Supply and fixing of horizontal air termination(roof conductor)25mm x 3mm G.I.Streep, G.I. clamps on surfacecomplete in all respect as approved by Engineer-in-charge. 139 Supply and fixing of vertical air termination final rod comprising of 300 mm long, 25 mm dia . Copper rod with one pointed prong and 100mm dai. 3mmthick base plate etc , complete in all respect, 140 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 141 Supply and burring of Safe Earthing Electrode T-19 Cu- Copper Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 Copper Strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 142 Supply and fixing of 6 Amp. to 32 Amp. SPMCB (10KA) C Curve. Cat-A 143 Supply and fixing of 40 Amp. SPMCB (10KA) C Curve. Cat-A 144 Supply and fixing of 63 Amp. SPMCB (10KA) C Curve. Cat-A 145 Supply and fixing of 6 Amp to 32 Amp DPMCB (10KA) C Curve. Cat-A 146 Supply and fixing of 63 Amp DPMCB (10KA) C Curve. Cat-A 147 Supply and fixing of 63Amp. Four pole MCB (10KA) C Curve. Cat-A 148 Supply and fixing of 100 Amp. 4 Pole MCCB (25KA) Therml Magneticc release,. Cat-A 149 S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat-A 150 S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge.CAT A 151 S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in allrespect, as Direct by Engineer in Charge. CAT A 152 S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A 153 S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A 154 Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect. 155 Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. 156 Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect. 157 Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. 158 Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 159 Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality 160 Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. 161 Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. 162 Supply and fixing of G.P. Boxes/Housing for Conceaded LED / CFL Lamps 335 mm wide x 63.5 mm deep(2.5)of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of 25.4 mm of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed & brand name should be empossed.Including all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. 163 Supply and fixing of electronic fan regulator( Modular) 120 -280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfactionof Engineer in charge of work. 164 Supply and fixing of recess/ Surface/ Pendent mountin ground 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT- AAA 165 Supply and fixing of recess mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT- AAA 166 Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect.CAT- AAA 167 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.CAT- AAA 168 Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect.CAT-AAA 169 Supply, Installation, Testing and Commissioning ofLED floodlight luminaire with Extruded aluminium,powder-coated finish, nominal system wattage 10-20 Watt with,CRI >70 .LED CCT is 3000K, with Beam Angle of 30 Degree. Luminaire should be capable of operating at line voltagepower supply from 140- 280 V AC. Lifetime should be at least 50,000 burning hours at L70.Lens material should be Toughened Glass,IP65,Mechanical Impact IK06.Luminaire should be BIS certified. Complete with all the accessories, driver, frame etc., Luminaires should have tilt option in various beam angles like 15deg,30,45deg.Luminaries should be provided with 5years warranty. Product should be make in India and OEM should have NABL approved Lab for last continuous 4years for all the required testing as per BIS.In all sefty m.s fithing in complete etc. 170 Supply, Installation, Testing and Commissioning ofLED floodlight luminaire with Extruded aluminium,powder-coated finish, nominal system wattage 20-30 Watt,CRI >70 .LED CCT is 3000K, with Beam Angle of 30 Degree. Luminaire should be capable of operating at line voltagepower supply from 140- 280 V AC. Lifetime should be at least 50,000 burning hours at L70.Lens material should be Toughened Glass, IP65, Mechanical Impact IK06.Luminaire should be BIS certified. Complete with all the accessories, driver, frame etc., Luminaires should have tilt option in various beam angles like 15deg,30,45deg.Luminaries should be provided with 5years warranty. Product should be make in India and OEM should have NABL approved Lab for last continuous 4years for all the required testing as per BIS. In all sefty m.s fithing in complete etc. 171 Supply, Installation, Testing and Commissioning ofLED floodlight luminaire with Extruded aluminium,powder-coated finish, nominal system wattage 40-50 Watt,CRI >70 .LED CCT is 3000K, with Beam Angle of 30 Degree. Luminaire should be capable of operating at line voltagepower supply from 140- 280 V AC. Lifetime should be at least 50,000 burning hours at L70.Lens material should be Toughened Glass, IP65,Mechanical Impact IK06.Luminaire should be BIS certified. Complete with all the accessories, driver, frame etc., Luminaires should have tilt option in various beam angles like 15deg, 30,45deg.Luminaries should be provided with 5years warranty. Product should be make in India and OEM should have NABL approved Lab for last continuous 4years for all the required testing as per BIS.In all sefty m.s fithing in complete etc. 172 SITC of Linear LED Wallwasher luminaire with Extruded aluminium,powder-coated finish, nominal system wattage 12-20 Watt Façade light fixture as per design requirement ,CRI >70 .LED CCT is 3000K, with Beam Angle of 40 Degree. Luminaire should be capable of operating at line voltage power supply from 100- 300 V AC. Lifetime should be at least 50,000 burning hours at L70.Lens material should be Toughened glass with Optical Lenses,I P66, Mechanical Impact IK07. Luminaire should be BIS certified. Complete with all the accessories, driver, frame etc., Luminaires should have tilt option in various beam angles like 15deg, 20, 30,40degIn all sefty m.s fithing in complete etc. 173 SITC of LED floodlight luminaire with Die-cast aluminium, powder-coated finish, nominalsystem wattage 160-200 Watt with minimum system lumens of 10560 lumens ,CRI >80 .LED CCT is 3000K, with Beam Angle of 30 Degree. Lifetime should be at least 50,000 burning hours at L70.Lens material should be High Purity Lenses, IP66, Mechanical Impact IK08. Luminaire should be BIS certified. Complete with all the accessories, driver, frame etc., Luminaires should have tilt option in various beam angles like 15deg, 20, 30,40deg.In all sefty m.s fithing in complete etc. 174 SITC, of Up-Down Wall Light luminaire with Extruded aluminium,powder-coated finish, nominal system wattage 30-40 Watt ,CRI >70 .LED CCT is 3000-4000K, with Beam Angle of 60 Degree. Luminaire should be capable of operating at line voltage power supply from 140- 280 V AC. Lifetime should be at least 50,000 burning hours at L70.Lens material should be Toughened Glass,IP65,Mechanical Impact IK06.Luminaire should be BIS certified. Complete with all the accessories, driver, frame etc., Luminaires should have tilt option in various beam angles like 15deg, 20, 30,40deg. in all sefty m.s fithing in complete etc. 175 Supply & Erracetion of factory fabricated & wire metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes,compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. NOTE: As par requiredSide, outdor/indor 176 SITC, of Reccesed LED Inground Light luminaire with aluminium die cast powder-coated finish, nominal system wattage 20-30 Watt with minimum system lumens of 1200 lumens ,CRI >80 .LED CCT is 3000K, with Beam Angle of 60 Degree. Lifetime should be at least 50,000 burning hours at L70.Lens material should be High Purity lenses with Tempered frosted step glass,IP67,Mechanical Impact IK10. Luminaires should have tilt option in various beam angles like 15deg, 20, 30,40deg 177 supply of following sizes of ceiling fan without reguletar complete with doble ball bearing , motor, blades, down rod, canopy, capacitor etc, complete as required 178 supply of following sizes of fresh air fan/Exhaust fan suitable for size etc, complete with all fixing accessories as required 179 supplying for laying of 1.5sq mm*3core copper flexibal wire with PVC conduit pipe complete with all fixing accessories as required 180 supplying for laying of 2.5sq mm*3core copper flexibal wire with PVC conduit pipe complete with all fixing accessories as required 181 supplying for laying of 4.0sq mm*3core copper flexibal wire with PVC conduit pipe complete with all fixing accessories as required 182 GST Extra as applicable
