|
| 1 | Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specified and directed. |
| 2 | Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20 mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flushboxes made out of 1.2mm thick of any module from 2 to 18module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paintincluding modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbedsurfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. |
| 3 | Description all as per item No 2.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed. |
| 4 | Description all as per item No 2.00 here in before but for socket out let point 5 Amps on independentboard complete all as specified and directed. |
| 5 | Description all as per srl item No 2.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switchwith using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed. |
| 6 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including stove enameleed steel conduit not less than 20mm dia with and including accessories, surface on wall/ceilingand its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, flame proofjunction boxes ISI marked for housing the flameproofswitches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbedsurfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. |
| 7 | Supply and fixing switch flame proof rotarytype with termination box in LM 6, 16A single pole 250 V complete all as specified and directed. |
| 8 | Supply and fixing LED light fitting 1x20 watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIB Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughned glass with LED tube light fixtures, driver, holders, connectors etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and directed |
| 9 | Supply and fixing of flmeproof cum waterproof LED Bulk Head light fitting of not less than 10 Watt, IP 66 protection of cast aluminium alloy material and heat and Impact resistance toughen \"A\" clear glass having anti corrosive epoxy powder coated finish coplete with all accessories pre wired and including connecting up with three core flexiblecopper conductor cable with suitable size all as specified and directed |
| 10 | Supply and fix modular switches, one way,6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. |
| 11 | Supply and fix modularswitches, oneway, 16/20 Amps, one module, 230 volt , AC supply, complete all as specified and directed. |
| 12 | Supply and fixmodular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed. |
| 13 | Supply and fix modular socket outlet 6/20 amps,3 pin, 2 module, complete all as specified and directed. |
| 14 | Supply and fix fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC complete all as specified and directed. |
| 15 | Supply and fix modular switches, bell push,6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. |
| 16 | Supply and fix modular blanking plate 1 module complete all as specified and directed. |
| 17 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with FRLSH )accessories, concealed on wall/ceilingand including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.2 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existing for one light/fan point/bell point controlled by one switch. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately . 2. All chases will be cut by chase cutter only. |
| 18 | Description all as per item No 17.00 here in before but for socket out let point 5 Amps on same board,complete all as specified and directed. |
| 19 | Description all as per item No 17.00 here in before but for socket out let point 5 Amps on independentboard,complete all as specified and directed. |
| 20 | Description all as per item No 17.00 above but with 2.5 Sqmm cable for 3pin 15 Amps switch socket outlet (Power Point),complete all as specified and directed. |
| 21 | Supply and fix switch piano 5 Amps, flush type, single pole, one way,230 volt , AC supply, complete all as specified and directed. |
| 22 | Supply and fix switch piano 15 Amps flush type one way 230 Volts,50 Hz , AC supply, complete all as specified and directed. |
| 23 | Supply and fix bell push 5 Amps, flush type, single pole, one way, 230 volt , AC supply, complete all as specified and directed. |
| 24 | Supply and fix socket outlet 3 pin 6 amps, 230 volt. flush type,complete all as speciied and directed. |
| 25 | Supply and fix socket outlet 2 in 1, 6 pin 5 /16 Amp and multi pin flush type, complete all as specified. |
| 26 | Supply and fix ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 27 | Supply and fix fan regulator electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and directed. |
| 28 | Supply and fix door bell electric ,ding dong /musical type, single phase 230 volts,complete all as specified. |
| 29 | Supply and fix sheet metal enclosure SP with two pin and earth plug and socket inclduing metal clad topwith one single pole MCB 20/32 Amp complete all as specified and directed. |
| 30 | Supply and fixing of LED light fitting 1x20W , 220V, AC with Poly Carbonate housing with batten type with driver , holder including 20W LED tube light, Cool White/Warm White, for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed. |
| 31 | Supply and fix channel for fixing of LED tube rod of CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. ( Tube rod shall be measured and paid for separately ).Note: - Channelmust be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact. |
| 32 | Supply and fix in repair 18 W/ 20WLED tube rod, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. Note: - Tube rod must be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact for fixing in existing LED fittings . |
| 33 | Supply and fix batten type withsurface mounted LED tube light fitting with high efficient diffuser mirror light, polycarbonate housingin CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. |
| 34 | Supply and fixbulk head light fitting, 10 watt, energy efficient withlamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting completeincluding disconnecting and taking down old existing light fitting of any descriptioncomplete all as specified and directed. |
| 35 | Supply and fixing of LED lamp 9 watt B-22 base complete including taking down old existing lamp any type complete all as specified and directed. |
| 36 | Supply and fixing in repair ofbracket for security light made up of 40/50mm dia suitable for security light, 0.6 metre long GI pipe,light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed. |
| 37 | Supply and fix LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDshaving optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any positioncomplete all as specified and directed. |
| 38 | Supply and fixLED security light luminaire 45 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any position complete all as specified and directed. |
| 39 | Supply and fixinverter LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDshaving optical grade polycarbonate lens with 4 hours battery back up all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any position complete all as specified and directed. |
| 40 | Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 6.0 sqmm drawnin and including rigid non metallic PVC medium grade 20 mm dia New concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSHof 6.0 sqmm,green colourfor earthcontinuity conductor including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specified and directed. NOTE: - 3 run of 6.0 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 41 | All as per Item No 40 above but for Material and labour for sub main wiring of 4.00 sqmm. NOTE:- 3 run of 4.0 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 42 | Material & labour for earthing with Galvanised Steel earth plate electrode 60cmx 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usingGalvanised Iron wire 4mmas earthing lead(upto terminal point) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm diaGI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 ofSSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to beincluding in quoted rates. |
| 43 | Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 Amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and includingMCCB 4 pole thermal release type ,125AMPS ,25 KAas incomer and MCBsas out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs/thimbles/glands and making good the disturbed surface matching with existing surface including taking down existing unserviceable MCCB/DBs including MCBs complete all as specified and directed. |
| 44 | All as per Item No 43 above but VTPN DB alongwithMCCB 4 pole,100AMPS 16 KAas incomer and MCBsas out going complete all as specified and directed. |
| 45 | Supply and fixing in repairSPN distibution board 8 way, double door, IP 43, as per IS 8623including not less than 100 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets and making good the disturbed surface matching with existing surface including taking down existing unserviceable DBs including MCBs complete all as specified and directed. |
| 46 | Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, \"B\" curve 6 to 32 Amps, ISIcomplete all as specified and directed. |
| 47 | Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, \"B\" curve 40 to 63 Amps, ISI marked complete all as specified and directed. |
| 48 | Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz,\"B\" Series complete all as specified and directed. |
| 49 | Supply and fix in repairMCCB four pole 415 volts, 125 Amps,25KA, 50 Hz, thermal release adjustable type complete all as specified and as directed. |
| 50 | Supply and fix in repairMCCB four pole 415 volts, 100 Amps,16KA, 50 Hz thermal releaseadjustable type complete all as specified and as directed. |
| 51 | Supply and fix in repair sheet steel enclosure with saperate busbar chamber for cable terminationwith and including MCCB four pole, 240 volts, 50Hz , breaking capacity 25 KA, 125 Amps, B curve,all as specified and and as directed. |
| 52 | Supply and fix in repair sheet steel enclosure with saperate busbar chamber for cable terminationwith and including MCCB four pole, 240 volts, 50Hz , breaking capacity 16 KA, 100 Amps, B curve,all as specified and and as directed. |
| 53 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable circulat of size 10 Sqmm including all incoming and outgoing connection with proper size of thimble complete all as directed and specified. |
| 54 | All as per Item No 53 above but one twin core cable circulat of size 16Sqmm complete all as directed and specified. |
| 55 | Material and labour for taking down existing lighting fiting any type/size/Make/capacity i.e T/L, Surface/ Recess Panel, flame proof, wall light, bulk head, mirror light etc and re-fixing the same after minor repair/cleaning including replacement connection wire with suitable size coper wire twin core 0.75 sqmm for connection from ceiling rose to light fitting complete all as specified and directed. |
| 56 | Material and labour for attending day to day complaints of E/M nature by means of checking unserviceable Electrical fitting and fixture and emergent fault rectification in elctrical circuit inclno light , earth leakage, short cicuit, neutral breakmains /sub mains/internal circuits of existing system of main building / block ,making continious electric supply including carrying out minor repairs etc as required to make system in order / functional by replacing, copper cable , copper thimbles, glands, earthing wire complete all as specified and as directed as required at site by Engineer-in-Charge. NOTE : - (a) Items reqd for replacement such as switchs, sockets for power/light/ fan/ bell/geyser points including complete will be measured and paid under respective items of BoQ. (b) Contractor rep/supervisor will report to MES Service Centrealongwith qualified/Experianced electrician and helper to collect dockets between 0900 hrs to 1000 hrs on all working daysfor rectification of complaints and resubmit the dockets after completion of each job on the same day.If contractor is failed to submit the docket within 48 hoursafter issuing of dockets , the contractor willliable to pay the penalty i.e. 20.00per docket per day till the re-submission of docket.(c) Contractor will attend emergent nature of work i.e. no light, short circuit after working hours/holiday as when ordered. The rate of the is deemed to be included in above quoted rates. |
| 57 | Supply only switch piano 5 Amps, flush type, single pole, one way,230 volt, AC supply, complete all as specified and as directed. |
| 58 | Supply onlyswitch, single pole two way 6 Amps, 230 volts AC circuit complete all as specified and as directed. |
| 59 | Supply only switch piano 15 Amps flush type one way 230 Volts,50 Hz , AC supply, complete all as specified and as directed. |
| 60 | Supply only bell push piano 5 Amps, flush type, single pole, one way, 230 volt , AC supply, complete all as specified and as directed. |
| 61 | Supply only socket outlet piano 3 pin 6 amps, 230 volt. flush type, complete all as specified and as directed. |
| 62 | Supply only socket outlet piano 2 in 1, 6 pin 5 /16 Amp and multi pin flush type, complete all as specified and as directed. |
| 63 | Supply only ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed. |
| 64 | Supply only fan regulator electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and as directed. |
| 65 | Supply onlydoor bell electric ,ding dong /musical| type, single phase 230 volts, complete all as specified and as directed. |
| 66 | Supply only lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. |
| 67 | Supply only switch modular 6 amps, one way single module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 68 | Supply only switch modular 16 amps, one way single module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 69 | Supply only socket modular 6 amps, 5 pin combined universal socket 2 module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 70 | Supply only socket modular 6/16 amps, 2 in 1, combined universal socket 2 module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 71 | Supply only fan regulator step type one module / 2 module, 120W, 230 Volts, 50 Hz, AC complete with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 72 | Supply only bell pushmodularwith and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed. |
| 73 | Sipply only Fan condenser 2.5 mfd complete all as specified and as directed. |
| 74 | Supply only Cable PVC copper conductor flexible twin core 0.50 mm complete all as specified and directed. |
| 75 | Supply only Cable PVC copper conductor flexible twin core 0.75 mm complete all as specified and directed. |
| 76 | Supply onlyMCB single pole, 240 volts, 50Hz , breaking capacity 10KA, \"B\" curve 6 to 32 Amps, ISI marked complete all as specified and as directed. |
| 77 | Supply only MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, \"B\" curve 40 to 63 Amps, ISI marked complete all as specified and as directed. |
| 78 | Supply only MCB single pole and neutral 240 volts, 16 to 32 Amps,10KA, 50 Hz,\"B\" Seriescomplete all as specified and as directed. |
| 79 | Supply only MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, \"B\" Seriescomplete all as specified and as directed. |
| 80 | Supply only 3 pin Top plug, 16 Amp , 240 volts AC , complete all as specified and directed. |
| 81 | Supply onlymetal clad top plug, AC Plug, 20 Amp, 230 Volt AC complete all as specified and directed. |
| 82 | Disconnecting and taking down old existing wall fitting of any description and in any position and supply and fixing aesthetically designed wall bracket light with glass and B22 holder including 9 watt LED lamp & clear diffuser including connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed. |
| 83 | Supply and fix in repair post top lantern LED 30/35 W , cast aluminium spigot, with high effieient LED light, with poly carbonate diffuser, complete with high efficient LED lamp 30/35 W and accessoriesinternally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 84 | Supply and fixing of LED based Bollard light 10 watt with aluminium pipe housing with glare free PMMA Diffuser, IP 65 of height not less than 600mmincluding necessary excavation & PCC work etc complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. |
| 85 | Supply and fixing recess/ surface mounted LED flat panel 1\" x 4\" with high efficient LEDs and glare free full decorative light fitting, 36 watt, energy efficient provided withincluding LED36 watt withprovision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and completeincluding disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 86 | Disconnecting and taking down old existing recess/surface mounting ceiling light fitting of any description and in any position and supply and fixing surface/ recess mounting LED slim square/round down lighter 12 W LED with high efficient LEDs glare free opal diffuser madeup of PDC AL with IP 20 Protection including connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed. |
| 87 | Supply and fixing recess/ surface mounted LED flat panel 2\" x 2\" with high efficient LEDs and glare free full decorative light fitting, energy efficient provided withincluding LED36 watt, Cool White / Warm White withprovision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and completeincluding disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 88 | Supply and fixing of Surface Spot light with black powder coated aluminium housing and pressure die-cast heat sink having high efficiency including 5-8 Watt LED Warm White, AC 220-240 V, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connectorof the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. |
| 89 | Supply and fixing LED flood light highly efficient integral type, made of pressure die cast aluminium housing with 10 KV SPD lens & toughened glass IP 66, energy efficient provided withincluding LED50 watt withprovision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and completeincluding disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 90 | Supply and fixing LED flood light highly efficient integral type, made of pressure die cast aluminium housing with 10 KV SPD lens & toughened glass IP 66, energy efficient provided withincluding LED100 watt withprovision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and completeincluding disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 91 | Supply and fixLED Highbay light fitting 80 watt , pressure die casthousing,IP 65/66 protection, better optics for uniform distribution with multiplte LEDssuitable for ceiling suspended mounting with system efficiency upto 100 lm/W withall accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any position complete all as specified and directed. |
| 92 | Supply and fix in repair driver for bollard light, recess/ ceiling light of 10 to 20 watt of suitable size and easy installation as per existing make all as specified and as directed |
| 93 | Supply and fix in repair driver for Ceiling light, post top lantern and security light ofof 30 to 45 watt of suitable size and easy installation as per existing make all as specified and as directed |
| 94 | Supply and fix LED Picture Light of 5-7 Watt,Warm White , 220-240 V AC Supply,Aluminium housing Bronze/Silver finish, flexible neck for adjustable beam, size not less than 300 mm, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connectorof the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. |
| 95 | Material and labour for replacemnt of existing rusted metal flush box/ sunken box of 8\"x5\" size withGI/mild steel sunken box or pressed steel terminal boxes of 8\"x5\" size made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc including taking down existing and making good the disturbed surface after completion of work all as specified and as directed. Note : Rate of cutting laminated sheet for fixing of switch, sockets, regulators etc shall deemed to be incuded in quoted rate. |
| 96 | Material and labour for replacemnt of existing rusted metal flush box/ sunken box of 7\"x4\" sizewith GI/mild steel sunken box or pressed steel terminal boxes of 7\"x4\" size made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc including taking down existing and making good the disturbed surface after completion of work all as specified and as directed. Note : Rate of cutting laminated sheet for fixing of switch, sockets, regulators etc shall deemed to be incuded in quoted rate. |
| 97 | Material and labour for replacemnt of existing rusted metal flush box/ sunken box of 4\"x4\" sizewith GI/mild steel sunken box or pressed steel terminal boxes of 4\"x 4\" size made out of 1.6 mm thick mild steel sheet metalwith earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc including taking down existing and making good the disturbed surface after completion of work all as specified and as directed.Note : Rate of cutting laminated sheet for fixing of switch, sockets, regulators etc shall deemed to be incuded in quoted rate. |
| 98 | Material and labour for replacemnt of existing rusted modular metal flush box of 1 to 3 module and fixing of GI flush box of 1 to 3 module for housing of modular switch, sockets, regulators etc including taking down existing flush box and making good the disturbed surface after completion of work all as specified and as directed |
| 99 | Material and labour for replacemnt of existing rusted modular metal flush box of 4 to 8 module and fixing of GI flush box of 4 to 8 module for housing of modular switch, sockets, regulators etc including taking down existing flush box and making good the disturbed surface after completion of work all as specified and as directed |
| 100 | Material and labour for replacemnt of existing u/s modular cover plate with frame of 1 to 3 module and fixing modular cover plate of 1 to 3 module for housing of modular switch, sockets, regulators etc including taking down existing modular cover plate with frame all as specified and as directed |
| 101 | Material and labour for replacemnt of existing u/s modular cover plate with frame of 4 to 8 module and fixing modular cover plate of 4 to 8 module for housing of modular switch, sockets, regulators etc including taking down existing modular cover plate with frame all as specified and as directed |
| 102 | Supply and laying of LT undergroung cable, XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 6 Sqmm 2 Core with suitable size of PVC Concealed/ surface conduit alondwith necessay fixing accessories (for Gate lights, Garden Lights and Garrage) complete all as specified and directed. |
| 103 | Material & labour for earthing with Galvanised Steel earth plate electrode 60cmx 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usingGalvanised Iron strip 25x3mmas earthing lead(upto terminal point) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40 mm dia,GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 ofSSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to beincluding in quoted rates. |
| 104 | Supplying and fixing in repair Air termination, single pointed aluminium rod 12mm dia 300mm long including dismantling of existing all as directed and specified. |
| 105 | Supplying and fixing in repair test terminal block made of gun metal or phosphorous bronz size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screwincluding dismantling of existing all as directed and specified. |
| 106 | Supplying and fixing in repair aluminium strip 25x3mm with saddles and fixing screwes etc for roof conductors and down conductors above ground including dismantling of existing all as directed and specified. |
| 107 | Supply and fix Gate light in Aluminum die cast with modern artistic design and white PC diffuser suitable with 7-8 Watt LED filament lamp B22,with top portion square/ round and accessoriesinternally pre wired and including connecting up with suitable size of flexible copper conductor cable including disconnecting and taking down existing light fitting and removal complete all as specified and directed. |
| 108 | Supply and fix decorative, wall mounting (Bed side light), chrome/brass finish fixture with opal glass diffuser suitable for 7-8 Watt LED filament lamp E27 baseincluding connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed. |
| 109 | Supply, laying and testing cable XLPE Insulated ,armoured, heavy duty electric cable 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 4 core including taking down exising service wire of any size all as specified and directed. |
| 110 | Supply, laying and testing cable XLPE Insulated ,armoured, heavy duty electric cable 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 core including taking down exising service wire of any size all as specified and directed. |
| 111 | Supply and fixing for GI protection pipe of 40mmdia light grade for cable protection including all fittings laid in trenches or fixed on pole, complete all as specified and as directed. |
| 112 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes, laying of cableetc not exceeding 10 Square metre on plan and getting out in soft/loosesoil complete all as specified and as directed. |
| 113 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed. |
| 114 | Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed. |
| 115 | Material and labour for unwashed dry sandcushioning for cable protection ,filling in trenches/ducts, complete all as specified and as directed. |
| 116 | Material and labour for old size bricks sub class \"B\" for cable protection laid along length of cable complete all as specified and as directed. |
| 117 | NOTE:- Amount of credit ofRs. 1,04,170.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
