Tender For Provision Of Construction Of Echs Polyclinic (Type D) At Firozabad Under Ge (East) Agra; 1 Lump sum price worked out by the contractor as per showm on drawing for BUILDING WORKS as listed in Sch ‘A’ PartI. 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Sch A Part II. 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Sch A Part III. 4 Lump sum price worked out by the contractor for SEWAGE DISPOSAL as listed in Sch A Part IV. 5 Lump sum price worked out by the contractor for ROAD / PATH / CULVERT as listed in Sch A Part V. 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Sch A Part VI. 7 Lump sum price worked out by the contractor for COMPOUND WALL AND GATEas listed in Sch A Part VII. 8 Lump sum price worked out by the contractor for EXTERNAL ELECTRIC SUPPLY as listed in Sch A Part VIII. 9 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY as listed in Sch A Part IX. 10 Lump sum price worked out by the contractor for SITE CLEARANCE ,EXCAVATION AND EARTH WORKas listed in Sch A Part X. 11 Sch A Part X.I ( Miscellaneous Items) NOTE:-This Schedule is not pre- priced by MES, Rate against Item No- 12 to 25 shallto quoted by the Contractor 12 INTERNAL ELECTRIFICATIONS & Fsheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprisingthree phase four wire copper strip bus bar of appropriate capacitycomplete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC415 VOLTS25 KA=01 NOas incoming(Note :- (i)TheDB shall be VTPN series ofLegrand Cat Ref 507725 or equivalent to Seimens/Schneider/ABB . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped.(iv)all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi) MCBs should have a same make as of DB. 13 S&F circular slim surface LED downlighter of 8 Watts with housing made up of die cast aluminum for better thermal management, high transmitivity non yellowing PMMA diffuser for better light output and uniform light distribution without glare complete all as specified and directed. 14 M & L forpoint wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in including cocealed conduit, using PVC FRLSinsulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly withcopper lugs inserted inMS boards complete heavy duty for housing switches, sockets, regulators, bell push etc, complete all as directed 15 (a) One light/fan/exhaust fan point controlled by one way 5 Amp switch. 16 (b) One 3 pin/5 pin socket out let 5 Amp on independent board –ditto- 17 (c) -ditto- but on same board . 18 M & L for point wiring with PVC FRLSinsulated unsheathed multistranded copper conductor of size 2.5 Sqmm, 1100V grade in including concealed conduit, using PVC FR LS insulated unsheathed copper conductor of size 2.5 Sqmm as earth continuity wire and connected to common earth dolly withcopper lugs inserted inMS boards complete heavy duty for housing switches, sockets, regulators, bell push etc, complete all as directed 19 M & L for point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 4 Sqmm, 1100V grade in including concealed conduit, using PVC FR LS insulated unsheathed copper conductor of size 4 Sqmm as earth continuity wire and connected to common earth dolly withcopper lugs inserted inMS boards complete heavy duty for housing switches, sockets, regulators, bell push etc, complete all as directed. 20 S & F Air Ventilating fan 300 mm dia metalic body single phase 230 volts 900 rpm including fixing and connecting the fan with 3 core PVC insulated and over all sheathed flexible copper conductor cable from ceiling rose/PVC connector to exhaust fanincluding louvers of suitable size, fastners, nut ,bolts etc complete all as specified and directed. 21 S & F Air Ventilating fan 450 mm dia metalic body single phase 230 volts 900 rpm including fixing and connecting the fan with 3 core PVC insulated and over all sheathed flexible copper conductor cable from ceiling rose/PVC connector to exhaust fan including louvers of suitable size, fastners, nut ,bolts etc complete all as specified and directed. 22 SEWAGE DISPOSALConstruction of RCC Septic tank conventional typefor 50 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole opening with cover connection etc complete as per TD CELZ/TD/750 sheet No 1/2 and 2/2 complete all as specified and directed. 23 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3 m dia x 3.00 m effective depth as per TD CELZ/TD/576 sheet No 1/2 and 2/2 complete all as specified and directed. 24 EXTERNAL ELECTRIFICATIONSupply and Fix twin core aluminium conductor 1.5 sqmm PVC insulated , sheathed wire drawn in pole from juction box to street light and including provn of holes in existingpole wherever required complete all as specified and directed. 25 Supply and fixing sheet moulding compound(SMC) junction box for and including three phase and neutral bus bar and MCB SPN 06 Amps, 250 Volts 50 Hz, 15 KA for control of sreet lights mounted on polewith the provisions of cable entry and exitMake Sintex/hensel /L&T product of size 280mmX170mmX130mm complete all as specified anddirected . 26 Supply and fixing of 60 W LED Street light with PDC housing ,IP 66 protection and Infra red sense based auto ON/OFF with all necessary accessories required for its installation all as specified and directed.Make-Halonix LED SL HLSLD-ML04-60-CWL-IRSEN-R or equivalent in Crompton/Havells. 27 Supply, erecting and installation of steel tubular, swaged, poleof overall length9 meter having maximum tensile strength 42 Kgf/mm2 of type 410 SP-31 conforming to IS-2713-1980, single swan neck made out of 25 mm dia MS pipe 1.5 mtr long to be jointed on top of LT pole incl fabrication work for fixing street light.A through hole of 14 mm dia shall be provided at height of 2.5 mtr from base plate for inserting 2 core cable from junction box to top of the pole and top portion shall be fabricated for fixing street light fittings including earth work complete with cast iron base plate, having suitable dia of hole through the pole with nuts & bolts for earthing arrangement, bottom portion of tubular steel pole having 165.10 mm outer dia in 5 meter length, 4.5 mm wall thickness, middle portion having 139.70 mm outer dia in 2 metre length4.5 mm wall thickness and top portion having 114.30 mm outer dia in 2 meter length, 3.65 mm wall thickness of pole wall, respectively, bottom MS square plate duly painted with two coat of black bituminous paint throughout,internally and externally up to planting depth and painting remaining portion of pole with two coats of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making / pasting three nos circular strips each of 100 mm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking / stencil writing of pole numbers with black paint including necessary excavation & earth work, removing excavated soil from site complete all as specified & directed.Note :- Necessary Excavation and earth work, PCC Work for foundation / erection of pole assembly will be deemed to be included in the unit rate. 28 Supply, installation , Commissiong and Testing of feeder pillar box,Kisokoutdoor type, floor mounted factory fabricated weather and vermin proof protection class IP 54 made out of 3.15 mm thick MS Sheet CRCA Sheet on angle iron 50X50X6mm frame of size suitable to incorporate following accessories with front and rear opening doors, handle type locking arrangementpowder coated internally and externally shall have channel base of appropriate size and mounted on PCC foundation of size as required or approved by manufacturers in PCC 1:3:6 TypeC-2 , using 40 mm graded crushed stone aggregate as recommended by manufacturer or directed by the Engr -in - charge including earth work complete comprising of following :Incoming:(a) Bus bar chamber comprising 4 Nos copper strip bus bars PVC insulated made of copper strip of size (10 x 10) mm. PVC sheathed with colour coding.(b) MCCB having current ratings 100 Amps with rupturing cap 36 KA , AC 415 Voltsfour pole with thermal releasecomplete with spreader links. Make Legrand or equivalent of make L&T/C&S/Siemens- 01 No(c ) Multifunctional digital panel meter with LCD display flush mounting type of size 96X96 mm, accuracy class 1, suitable for CTs with secondary current 5A, Make L&Tor equivalent of make Schneider or AE:-01Nos Outgoing :(a)MCCB having current ratings 63 Amps with rupturing cap 36 KA , AC 415 Volts4 pole with thermal releasecomplete with spreader links. Make Legrand or equivalent of make /C&S/L&T/Siemens- 02 Nos.
