Tender For Procurement Of Heat Resistance Paint Tests At Nabl Accredited Laboratory, karaikudi-Tamil Nadu

Tender For Procurement Of Heat Resistance Paint Tests At Nabl Accredited Laboratory.; 1 List of Tests 2 Odor Test - as per standerd ASTM D1296 3 Volatile organic compounds VOC content- as per standerd ASTM D2369- IS 101 Part 8-sec 2 4 Pot life and Viscosity of HRP mixture- as per standerd BS EN ISO 2431 or ASTM D 1200 or IS101 Part 1 Sec 5 5 Drying time- as per standerd ASTM D1640 or IS 101 Part 3, Sec 1 6 Density- as per standerd ASTMD1475 orIS 101 Part 1, Sec 7 7 Specular gloss- as per standerd BS 2782-5 520A or IS- 101-PART-4-SEC-4 8 Dry film thickness- as per standerd ASTM E376or ASTM B499 9 Bend- Flexibility test room Temperature - as per standerd ASTM B571 or IS 101 Part 5 Sec 2 10 Bend- Flexibility test Low Temperature- as per standerd IS 101 Part 5 Sec 2 for reference 11 Adhesion cross hatch- as per standerd ASTM D 3359 Test Method A-B or BS3900-Part E6, 1 mm spacing 12 Adhesion Dolly test- as per standerd ASTM D4541 13 Hardness Scratch test- as per standerd ASTM D3363 - IS 101 Part 5 Sec 1 14 Water Resistance- as per standerd ASTM D870 for 168 Hrs 15 Fuel Resistance (ATF K-50) - as per standerd ASTM D 6943 16 Gearbox oil Resistance (OEP-70)- as per standerd ASTM D 6943 17 Hydraulic Oil (H-515)- as per standerd ASTM D 6943 for 168 h at 40 C 18 Grease Resistance (G382, G366, G355) - as per standerd ASTM D 6943 for 168 h at 40 C 19 Weather resistance- as per standerd ASTM G155Duration 500 h Chamber condition: Temp: 42 ±3 °C 20 High Temperature Test- as per standerd MIL-STD-810G Method 501-5 for 24 hour Temperature up to 200 °C 21 Low temperature - as per standerd Test MIL-STD-810G Method 502-5 Procedure-II 4 h 22 Salt Spray- as per standerd MIL-STD-810 G Method 509-5for 96 h 23 Combined Altitude Temperature and Humidity test CATH- as per standerd MIL-STD-810G (cycles: 10 cycles) (1 cycle=16 h) 24 Resistance to dust- as per standerd MIL-STD-810G Method 510-5 JSS 55555 Test No 14 25 Resistance to rain driving rain- as per standerd MIL- STD-810G Method 506-5- JSS 55555 26 Vibration Test- as per standerd MIL-STD-810G Method 514-6(Main rotor frequency: 5.88Hzf=5.88Hz, A 1=0.144g f1 =17.65Hz, A2=1.765g) 27 Thermal shock- as per standerd MIL-STD-810G Method 503-5 Procedure I-B 28 Humidity resistance- as per standerd MIL-STD-810G, Method 507-5 29 Icing-freezing rain- as per standerd MIL-STD-810G Method 521-3- JSS 55555

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	12-12-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	19-12-2024

Refer document

Refer document

Refer document