Repair/Renovation Of St/G And B Boys Hostel Doda - Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and thelike not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil. 2 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead :In cement mortar. 3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size). 4 Random Rubble masonry with ~ard stone from qyarry in foundation and plinth including levelling up with cement concrete1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with.cement mortar 1:6 (1 Cement: 6 coarse sand). 5 Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand). 6 Extra for brick work in superstructure above plinth level upto floor V level. (By manual means). 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars,piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size). 8 Centring and shuttermg including strutting, propping etc. and removal of form for·Suspended floors, roofs, landings, balconies and access platform. 9 Centring and shuttermg including strutting, propping etc. and removal of form for·Lintels, beams, plinth beams, girders,bressumers and centilevers.. 10 Edges of slabs and breaks in floors andwalls.Under 20cms wide. 11 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 12 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel of 1.25mm/1.60mm thickness including hinges jamb, lock, jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm/ 1.60mm pressed mild steel welded or rigidly fixed togetherby mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-chc-rge:Profile A:- Sheet of 1.25mm thickness and base ties of 1.25mm. 13 15mm Cement plaster on the rough side of single or half brick wall of mix:. 1 : 6 ( 1 cement : 6 fine sand) 14 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.Second kail wood. 15 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade 1 New work (two or more coats) over and in-eluding priming coat with cement primer 16 Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 17 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coatson new work. 18 Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA,or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 19 Providing and fixing of PVC wall panelling including all leads lifts and carriages . 20 Strctural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 21 Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in rizontal/vertical or curved surface)excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2. 22 Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1ement : 4 coarse sand) .Ordinary cement without any pigment. 23 Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to givean even shade. New work (two or more coats) including a coat of. approved steel primer but excluding a coat of mordant solution. 24 Providing and fixing bright finished brass hard drawn hooks and eyes.250mm. 25 Constructing masonry Chamber 120x120x1 00 em, inside with 75 class designation brick work in cement mortar 1 :4 (1 cement : 4coarse sand) for sluice valve, with C.l. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2oarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation, foundationoncrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. 26 Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm. 27 Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade with necessary screws etc. complete :150x10 mm. 28 100x10 mm 29 Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour andshade with necessary screws etc. complete.125 mm. 30 100 mm. 31 Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.15 mm dia. nominal bore. 32 20 mm dia. nominal bore. 33 Providing and fixing G.l. Union in existing G.l. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required.15 mm nominal bore. 34 20 mm nominal bore. 35 Providing and fixing ball valve (brass) of approved quality complete.15 mm nominal bore. 36 Providing and fixing of PVC fitting of approved brand and manufacture such as prince or supreme including cost of meterial all job complete 37 100mm diameter. 38 75 mm diameter. 39 PVC long band100mm diameter. 40 Floor Trap 75 mm diameter. 41 100mm dia pipe 42 Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flushpipe (of approved make) manuallycontro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.. 43 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity-white. 44 Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed.fitting arrangements, weighing not less than 1 06gms. 45 Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931.15 mm nominal bore. 46 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. 47 Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931.15 mm nominal bore. 48 Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps. 49 providing and fixing geysers of approved brand and manufacture such as havells,,usha including fitting charges complete job. 50 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement andmatching pigments etc. complete Size of tile 60x60cm. 51 Providing and fixing glass panes with pu~ty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes. 52 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking 53 Carriage sand avg. lead of 19.00 km by MT. 54 Carriage of bajree avg. lead of 10.00km by MT. 55 Carriage of Bricksby MT avg. lead of 210.00 km.
