Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-12-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-12-2024 |
| 2 | 26-11-2024 | Other Corrigendum No 1 | Other | 09-12-2024 |
| 3 | 26-11-2024 | BOQ Corrigendum No1 | BOQ | 09-12-2024 |
| Sl. No. | Item Description |
| 1 | Material and labour for surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists. Cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and liftand clean water thoroughly complete all as specified and directed by Engr-in-Charge. |
| 2 | Supply and fix high strength deformed corrosion resistant (CRS) bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work |
| 3 | Supply and fixhigh strength deformed corrosion resistant (CRS) bars, 8 to 10mm diain stirrups, spacers and binder, cut to length bent to shape required includingcranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work |
| 4 | Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof slab etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. |
| 5 | Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excluding the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge.Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved . |
| 7 | Material and Labour for reinforced cement concrete (Nominal mix) 1:2:4 using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja and in shelves etc complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika |
| 10 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer\"s instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GENote:(a)New Reinforcement shall be measured and paid separately under respective item.(b) Cost of welding deemed to be inclusive in this item of work. |
| 11 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GENote-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge |
| 12 | Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etccomplete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 13 | Material and labour for providing and laying 35 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etccomplete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GENote for Item No.1 to 13:-(i) The work under Item No. 1 to 13 shall be carried out by authorised applicator only.(ii) Defect liability for these items shall be 5 years from certified date of completion.(iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above.(iv)Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority. |
| 14 | Taking down cement plaster on brick or stone walls, ceilings etc., without disturbing brick work,including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 15 | Material and labourfor rendering 10mm thick on internal wall surfaces using factory manufactured pre mix/ready mixplaster of \"Roofit Mix\" of M/s Premier Floor to Roof Materials Pvt Ltd/\"Easy plast\" of M/s Walplast Products Pvt Ltd/\"Readiplast\" of M/s Ultratech Cement Ltd\" / Sound last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand conforming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge. |
| 16 | Material and labour for rendering 5 mm thick on ceiling using factory manufactured pre mix/ready mixplaster of \"Roofit Mix\" of M/s Premier Floor to Roof Materials Pvt Ltd/\"Easy plast\" of M/s Walplast Products Pvt Ltd/\"Readiplast\" of M/s Ultratech Cement Ltd\" / Sound last PMC-1 of M/s Sound build care Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in ceiling, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge. |
| 17 | Material and labour for rendering15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of \"Roofit Mix\"of M/s Premier Floor to Roof Materials pvt.ltd/ \"Easy plast\" of M/s Walplast Products pvt.ltd/ \"Readiplast\" of M/s Ultratech Cement Ltd/\"Soundplast PMC-1\" of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S : 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @3% as per manufacturer\"s instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required,inclding sagol finish including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute worketc. complete all as per specifications & as directed by the Engineer-in-Charge. |
| 18 | Material and labour for opening out cracks in wall surfaces in \"V\" shape by mechanicalgrinder and removing the loose material. filling with crack fillerof Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer\"s instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 19 | Material and labour for preparation of newly plastered surfaces of wall and applyingtwo coats of oil bound distemperwith roller over a coat of alkali resistant wall primer complete all as specified and as directed Make : Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints |
| 20 | Material and labour for preparation of newly plastered surfaces of ceiling and applyingtwo coats of oil bound distemperwith roller over a coat of alkali resistant wall primer complete all as specified and as directed Make : Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints |
| 21 | Material and labourfor preparation of new plastered surfaces of ceiling and applyingthree coats of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat ofacrylic primer upto a height of bldgroofincluding formwork/scaffolding/ladders and safety belts with precautions etccomplete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India |
| 23 | Material and labour for preparation of old plastered ceiling surfaces and applying one coat of white washcomplete all as specified and directed by Engineer in Charge. |
| 24 | Material and labour for complete removal of existing treatment of old decorated surfaces of walls and applyingtwo coats of oil bound distemper with roller over a coat of alkali resistant wall primercomplete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints |
| 25 | Material and labour for complete removal of existing treatment of old decorated surfaces of ceiling and applyingtwo coats of oil bound distemper with roller over a coat of alkali resistant wall primercomplete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints |
| 26 | Material and labour for complete removal of existing treatment of plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat ofacrylic primer upto a height of bldgroofincluding formwork/scaffolding/ladders and safety belts with precautions etccomplete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India |
| 27 | Material and labourfor preparation of wall surfaces and applying 1.5mmthick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 28 | Material and labourfor preparation of ceiling surfaces and applying 1.5mmthick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 29 | Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 30 | Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 31 | Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 32 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 151 & 180 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge.Make : RAJSHRI / SINTEX / TUFFFLON /M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 33 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 & 176 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge.Make : RAJSHRI / SINTEX / TUFFFLON /M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 34 | Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Material and labour for plain cement concrete 1:3:6type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Supply and fix 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge.Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA) |
| 38 | Supply and fix factory made plain framedpanelled shutter 35mm thick 2nd class hardwood rail and style (three panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA) |
| 39 | Supply and fix 35mm thick factory made 2nd class hard wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA) |
| 40 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge |
| 41 | Supply and fix in extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge.Make : Classic/ Shalimar/ CLIF/ARGET |
| 42 | Supply and fix Stainless steel butt hinges medium weight of size 100mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 43 | Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 44 | Supply and fix aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 45 | Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Classic/ Shalimar/ CLIF/ARGET |
| 46 | Material and labourfor preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.Make: Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux |
| 47 | Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed by Engineer-in-Charge.Make: Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux |
| 48 | Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit IndiaNote:(i)Glass panes /wire mesh will be measured & paid separately.(ii) Rubber beading will not be weighed. |
| 49 | Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixedin aluminium windows complete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 50 | Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip,in squares not exceeding 0.5 Sqm in each panecomplete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 51 | Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge |
| 52 | Supply and fix 15 micron coloured aluminium anodised grill of design NoDG-101 of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLEof Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE |
| 53 | Demolition of brick work/stonemasonry built in cement mortaror cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD landcomplete all as specified and as directed by Engineer-in-Charge. |
| 54 | Material and labour for brick work with sub class \"B\" bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius, in half brick thick walls with old size bricks, built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge |
| 56 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing),removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed |
| 58 | Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to matchoverand including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles |
| 61 | Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to matchoverand including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles |
| 62 | Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over& including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles |
| 63 | Material and labour for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm (or nearest size) ,on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over& including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles |
| 64 | Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Material and labourfor machine cut Kotastone slab flooring20-25 mm thick over cementscreed bed 20mm thick in cement mortar 1:4 base, laid and jointedwith grey cement slurrymixed with pigmentto matchthe shade of the slabincludingrubbing, polishing etc complete all as specified and directed by Engineer in Charge. |
| 66 | All as per item No.65 described here-in-before but in skirting/dado including 10mm thick Cement Mortar 1:3 backing coat etc complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Material and labour for rounding the edges of stone slab as in steps, cooking platform and similar situations complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block complete all as specified and as directed by Engineer-in-Charge.Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur |
| 69 | Material and labour for 20-25 mm thick machine cut cudappa stone slab in jambs / cills / soffits of window / ventilator as in frame work to support for aluminium section, laid and jointed with grey cement slurry mixed with pigment to match theshade of slab including rubbing and polishing complete over backing coat 10 mm thick in CM (1:4)complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Material and labour for marble work 20 mm thickmachine cut, table rubbed and polished,bedded and jointedas in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match including 20mm thick screed bed/rendering coat in cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 72 | Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 73 | Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 74 | Dismantling of 110mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if requiredcomplete all as specified and as directed by Engineer-in-Charge |
| 75 | Dismantling of 75mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if requiredcomplete all as specified and as directed by Engineer-in-Charge |
| 76 | Supply and fixUPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.Make : Prince / Supreme / Finolex |
| 77 | Supply and fixUPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.Make : Prince / Supreme / Finolex |
| 78 | Supply and fix UPVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-ChargeMake : Prince / Supreme / Finolex/Astral |
| 79 | Supply and fix UPVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-ChargeMake : Prince / Supreme / Finolex/Astral |
| 80 | Supply and fixUPVC (SWR)vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge.Make : Prince / Supreme / Finolex/Astral |
| 81 | Supply and fixPVC (SWR)vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge.Make : Prince / Supreme / Finolex/Astral |
| 82 | Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating @ 6 kgf/ cm2 fixed to wall completeall as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Supreme/Astral |
| 83 | Supply and fix in repairs UPVC (SWR) floor trap outlet dia 75mm, plain with gratings including jointing etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral |
| 84 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 85 | Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mmbore complete all as specified and directed by Engineer-in-ChargeMake : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 86 | Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 87 | Supply and fix in repairs tubular towel rail aluminium anodised 20mm dia, \"D\" type, 60cm long between flangesfixed to walls withscrews complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Supply and fix in repair Swivel Shower of PTMTany colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.Make : Prayag / R.S. Industries (POLYTUF) |
| 89 | Material and labour for providing stages wise waterproofing treatment to sunken portion of toilets as under and as directed by Engineer-in-Charge.Stage 1:Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete all as specified and directed.Stage 2:Providing15 mm thickplaster in CM 1:3 mixed with integral water proofing chemicalof STP Ltdin the proportion /quantity all as per manufactures instructions.Stage 3 : Primer - Mix TarfeltLM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 :Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brushall as per manufactures instructions.Stage 5: Laying 50 GSM fibber glass cloth over the 1st coat while the coated surface is still tackyStage 6:After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with waterof STP Ltd by brush as per manufactures instructions.@1kg /SqmStage 7: Providing10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions. |
| 90 | Material and labour for plain cement concrete 1:5:10, type E-2, using 40 mm graded stone aggregate, as in lean concretecomplete all as specified and as directed by Engineer-in-Charge. |
| 91 | Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, \"P\" or \"S\" trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge.Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson |
| 92 | Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with \"P\" of \"S\" trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closedpattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified anddirectedby Engineer-in-Charge.Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson |
| 93 | Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, floatand handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed.Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA |
| 94 | Supply and fix in repairs CI nahani/floor trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge.Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh |
| 95 | Supply & Fixin repairs salt glazed stoneware gully traps, square/rounded mouthed type \" P \"of size 150 x 150mm including grating and setting in PCC 1:2:4 type B1 and jointing to drain with CM (1:1) complete all as specified and as directed by Engr-in-Charge |
| 96 | Supply and fix in repair PTMT grating doom over Nahani trap and floor trap of 100mm Dia (Min Wt 25 gms) complete all as specified and directed by Engineer-in-Charge.Make : Prince / Supreme / Finolex/Astral |
| 97 | Supply and fix in repair PVC connection, 15 mm size 450 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge.Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet |
| 98 | Supply and fixin repairs vitreous chinawash hand basin, white, flat back of size 550 mm x 400mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed by Engineer-in-Charge.Make : Cera/ Hindustan/ Parryware/ Jaguar/ Hindware/ JohnsonNote:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. |
| 99 | Supply and fixin repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge.Make : Prayag/ Nirali/ Bluestar (Silver Shine) |
| 100 | Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply and fix in repair450 mm x 600 mm bevelled edge mirror of selected quality glass, with PVC moulded frame decorative type, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and as directed by Engineer-in-Charge.Make : Modi/ Atul/ Saint Gobain |
| 102 | Dismantling PVC water tank exceeding 1000 ltr but not exceeding 2000 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex |
| 104 | Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge.Make : Leader/ Bir/ Zoloto/ Kirloskar |
| 105 | Supply and fix in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 25mm dia complete all as specified and as directed by Engineer-in-Charge.Make : Jaypee/ GMP/ Neta/ Zolota/ Prayag Polymer/ Symet |
| 106 | Supply and fix Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed by Engineer-in-Charge. |
| 107 | Supply and fix in repair, Wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges all as specified and as directed by Engineer-in-Charge. Make : Jaguar catlogue No. FLR-CHR-5273UPR or equivalent |
| 108 | Supply and fix in repair, Jet spray (Butterfly) with 1Mtr tube Cat No-BEA-17 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE |
| 109 | Supply and fix in repair, health faucet (body cleaner) with 1.0m tube and hook (PVC tube), white/Ivory Cat No- BEA-84 all as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 110 | Supply and fix in repair, corner glass shelf 300mmCat No- BEA-44 all as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 111 | Supply and fix in repair, glass shelf 300mm (with ABS Brackets) Cat No- BEA-49 all as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 112 | Supply and fix in repair Peg set 6 Cat No- BEA-30 all as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 113 | Supply and fix in repair, CP brass soap Dish Cat No- BA-15 all as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 114 | Supply and fix in repair, CP brass towel Ring Cat No- BA-21 all as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 115 | Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole into brick wall / concretesurfaces (for removing the roots of trees/plants) area not exceeding 0.50sqm each and using acid to burnthe all roots of tree/plants and making good disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and including making good adjoining surface with existing finishes all as specified and as directedby Engineer-in-Charge.Note: The unit quoted rate shall be deemed to include WPC & necessary scaffolding as required. |
| 116 | Dismantling wrought iron or mild steel work of any description not otherwise provided for& removing clear off site after credit is recovered by the dept complete all as specified and as directed by Engineer-in-Charge. |
| 117 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge. |
| 118 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) fixed independently, without connecting plates etc. conforming toFe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-ChargeNote- Work to be carried out for height upto 15 mt and above/ factory type bldg/Hanger)Make: JINDAL / INDALCO /TATA/HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets |
| 120 | Material and labour for MS framedworksuch as grills , gratings, etc withendsof barsshouldered and /orrivetedor forgedinto spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge. |
| 121 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux |
| 122 | Supply and fix stainless steel kitchen plate rack made out 1mm thick of size 900mmx600mmx200mm including fixing with rawl plug screwscomplete all as specified and as directed by Engineer-in -charge.Make- Blue Star Cat No. KPR-313/KPR-314or equivalent of Nirali/Parryware |
| 123 | Material and labour for preparing old steel surfaces of any description and in any position, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc including necessary scaffolding arrangement as required at site complete all as specified and as directed by Engineer-in-Charge.Make: Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux |
| 124 | Note:Deduct Credit for demolished / dismantled material of Rs. (-) 49,792.00 (Minus) as listed in Schedule of Credit.Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\" |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
