E-Tender For Construction Of New Electrical Stock Room In Wagan Tippler Area Of Mtps Ii. ; 1 Clearing the scrub jungle growth and colleE6:E24 from the site as directed by the enginner at site including all labour charges, hire charges for vehicle, tools and plants required, etc., complete. 2 Earth work excavation and depositing on bank with initial lead of 10m & initial lift of 2m in all types of soil as directed by the Engineer at site, including cost of tools and plants, labour charges, leads, lifts, transport, etc., complete. (A) Earth work excavation for ordinary Soil. 3 Earth work excavation and depositing on bank with initial lead of 10m & initial lift of 2m in all types of soil as directed by the Engineer at site, including cost of tools and plants, labour charges, leads, lifts, transport, etc., complete. (B) Earth work excavation for SDR Soil. 4 Providing PCC1:4:8 using 40mm HBG metal for Sump foundation as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads, lifts, etc. complete 5 Refilling with excavated soil(Other than sand) complying with standard specification for filling in foundation and basement as directed by the Engineer at site, includingcost of labours, leads, lifts, etc. complete. 6 Providing Random Rubble Masonry in CM 1:5 for basement as directed by the Engineer at site, including cost of all materials, labour charges, curing,leads, lifts, transport, etc. complete 7 Flush pointing with CM 1:3 to R.R walls including cost of all materials, lead lift, labour charges etc.complete. 8 Brick work in CM 1:4 usingfly ash bricks for bick walls as directed by the Engineer in charge including cost of all materials,labour charges, curing, lead, lift, T&P etc., complete. 9 Supplying and filling with river sand in layers for basement well rammed, watered, consolidated as directed by the Engineer at site, including cost of filling sand, cost of labour, leads, lifts, etc.complete. 10 Providing and placing of RCC1:1½:3 using 20mm HBG metal as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete but excluding cost of reinforcement. (a) RCC for Plinth Beam 11 Providing and placing of RCC1:1½:3 using 20mm HBG metal as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete but excluding cost of reinforcement. (b) RCC for roof slab, lintel,sunshadeetc., 12 Providing steel reinforcement for all RCC works including cutting, bending, binding, typing and placing in position including cost of steel, binding wire, lead, lift etc., complete as directed by the Engineer in charge at site 13 Plastering in C.M 1:5,12 mm thickfor wall surfaces including cost of all materials, charges for removing old plastering, labour charges ,curing,lead, lift etc complete. 14 Plastering in C.M 1:3 , 10 mm thickfor Ceiling surfaces including cost of all materials, labour charges ,curing,lead, lift etc., complete. 15 Plastering in C.M 1:3 , 20 mm thickfor flooor finishing including cost of all materials, labour charges ,curing,lead, lift etc., complete. 16 Supplying, Fabricating and Fixing in Position of MS fully panelled Door of single leaf of required size using 40X40X5 mm MS Angles for door frame, 25X25X5 mm MS Angles for shutter frame by adopting 5 Nos. horizontally, 2 nos. vertically,shutter covered with 18 Gauge MS sheet, painting two coats with enamel paint over a coat of red oxide, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lift, etc complete. 17 Supplying and fixing in position of partly glazed mild steel windows of required size using 23x18x18x3mmZ section for window main frame, 46x23x20x3mm J sectionfor intermediate frame, 23x18x18x3mmZ section for shutter frame with 4 leaves top leavesglazed with 4mm thick plain glass, bottom leaves panalled with M.S sheet of 18gauge with 10mm square bar grill at 100mm c/c, 4 nos of hold fasts, handle pulleys, latches with locking arrangements,including cost of fabrication, transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:1.5:3, painting two coats with enamel paint ver a coat of primer cost of all material,labour charges, lead,lift,T&P, etc complete. 18 Providing Two coats of Oil bound distember of approved quality and colour over the one coat of primer to the inner wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift etc., complete. 19 White washing with two coats of white cement for ceiling surfaces including cost of all materials, scaffolding, Labour, Lead, Lift etc., complete. 20 Colour washing with two coats of cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, labour, curing, lead, lift etc., complete.
