Tender For Renovation Of Existing Jawan Barrack At Itbp Camp Of 48Th Bn, , Located In North Sikkim At An Altitude Of 13900 Feet And 50 Km From Gangtok, Distt–East Sikkim, Sikkim Connected With Road, Sikkim-Sikkim

Renovation of existing Jawan Barrack at ITBP Camp of 48Th Bn, , located in North Sikkim at an altitude of 13900 feet and 50 Km from Gangtok, Distt–East Sikkim, Sikkim connected with Road; 1 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :Decorative veneer facings of approved manufacture 2 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm 3 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :250x16 mm 4 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm 5 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100 mm 6 Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) 7 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 8 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work 9 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. 10 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc.complete.40mm thick with 20mm nominal size stone aggregate. 11 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 12 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 13 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch 14 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amp socket 15 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amp switch 16 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amp Socket 17 Supplying and fixing brass batten/ angle holder including connection etc. as required. Angle Holder 18 Supplying and fixing brass batten/ angle holder including connection etc. as required. Batten Holder 19 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6way 20 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63amp 21 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole

Refer document

INR 10900.0 /-

INR 5.44 Lakhs /-