Tender For Repair And Maintenance Work Required For Upgradation Of Building,Badaun- 1 Dismantling doors & windows leaves excluding chawkhats inluding stacking of dismantled materials as directed by engineer-in-charge with in distance of 60mts. (D.SR.No.-15.12.1) 2 Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. (D.SR.No.-15.56)) 3 Dismentling brick workincluding base concrete and stacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item. DSR No-15.7.4 4 Class 150 brickwork in 1:6 cement mortor in Super structure DSR No-15.7.4 5 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR NO-13.1.1 6 Providing and laying 600x600mm vitrified tiles (DSR No-11.41.3) 7 Granite stone slab 18mm thick mirror polished in wall and steps. (Sch DSR 8.2.2.2) 8 Providing and fixing 12.5mm thick tapered edge gypsum plain board (IS-2095) false ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheet and galvanised with zinc coating as per IS-277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flange of 27mm and 37mm at 1200 center to center etc all complete (DSR 12.45.1) 9 Removing dry or Oil bond destemper old white or colour wash including disposal of refuse materials as directed by Engineer-in-charge with a distance of 60 mts 10 Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete. 11 Finishing wall with two coat of acrylic smooth exterior paint of best quality including all materials, labours, T&P etc all complete. (DSR 13.46.1) 12 Providing wood work in frames of doors, windows and other frames of sal wood, wrought framed and fixed in position with holdfast etc all complete. (DSR 9.1.2) 13 Providing and fixing of12 mm thick factory made one side laminated veneer lumberdoor shutter conferming to IS:14616 and TADS 15:2001 (PART-B) Fixing with butt hinges of require commercial quality confirming to IS 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges 14 Painting 2 coat of approved superior quality ready mixed synthetic enamel paint on previously painted old wood or steel work including all materials, labours, T&P etc all complete. (dsr no-13.62.1 15 Prviding and fixing ISI marked MS heavy weight butt hinges (125mm) with necessary screw etc all complete. (DSR 9.56.1) 16 Prviding and fixing ISI marked Oxidised MS sliding door bolts (size 300x16mm) with necessary nut and bolts etc all complete. (DSR 9.62.1) 17 Prviding and fixing ISI marked Oxidised MS tower bolts (size 250x10mm) with necessary screw etc all complete. (DSR 9.63.1) 18 Prviding and fixing ISI marked Oxidised MS Handle (size 125mm) with necessary screw etc all complete. (DSR 9.66.1) 19 Prviding and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82.1) 20 Providing and fixing aluminium die cast body tubular type universal door closer (IS-3564) with necessary acessories and screw etc complete. (DSR 9.83) 21 Providing and fixing( Upvc)double glazed hermetically sealed glazing in aluminium windows(powder coated), ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.9.147A 22 Providing and fixing of Cartainon window including all fixtures and arrangement etc all complete. 23 Dismentling brick workincluding base concrete and stacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item. DSR No-15.7.4 24 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, Sch 17.58 (ii) 25 Providing and laying of brick coba average 100mm thick 1:4 cement coarse sand mortar including supply of all materials, labours and T&P etc all complete. 26 Making Khurras 45x45 cm with average minimum thickness of 5 cm concrete 1:2:4 over P.V.C Sheet…complete item 27 Making Gola75x75 mm in concrete 1:2:4 over P.V.C Sheet…complete item 28 Providing andfixing of scaffolding ,ladder.balli,chahli,bandani etc.including supply of all materials, labours and T&P etc all complete. 29 Cleaning of Disposal malwa Distance 3 KM……….Complete item. 30 Providing and fixing 12 mm thick frameless toughened glass door shuttrr including necessary cutting and making good etc. complete.DSR-21.18 31 Providing and fixing Motar make ozone fortoughened glass door shuttrr including necessary cutting and making good etc. complete.M.R 32 Providing and fixing 12 mm thickP.V.C Wall panneling …….complete item Market rate 33 Providing and fixing of 100mm dia PVC rain water pipe with PVC bend and shoe etc all complete. 34 Dismantling cement concrete damage floor including base concrete and stacking of dismantled materials as directed by Engineer-in-charge with in distance of 60mts. (D.SR-NO-15.23.2) 35 Dismantling of WC pan, Cammode, squating plate, urinal, wash basin and flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR 15.52) 36 Dismantling GI pipes including stacking of pipes with in 50mts lead as per direction of Engineer-in-charge. (DSR 15-44.1) 37 Dismantling CI pipe including stacking of pipe & lead at site with in 50mts lead as per direction of Engineer-in-charge. (DSR 15-45.1) 38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (DSR 18.9) 39 External work 40 32mm nominal outer dia pipe 41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 42 Concealed work, including cutting chases and making good the walls etc. (DSR 18.8) 43 15mm nominal outer dia pipes 44 20mm Nominal outer dia pipes 45 25mm Nominal outer dia pipes 46 Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines : 47 160mm dia 48 110mm dia 49 75mm dia 50 Providing and fixing SWR PVC plain bend of required degree. 51 160mm dia 52 110mm dia 53 75mm dia 54 Providing and fixing SWR PVC junction Tee of required degree. 55 160mm dia 56 110mm dia 57 75mm dia 58 Providing and fixing of SWR PVC Nahani trap etc all complete. 59 75x110mm 60 Providing and fixing of SWR PVC Gully/P- trap etc all complete. 61 110x110mm 62 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 63 25 to 40 mm nominal bore (DSR 18.13.1) 64 Cement concrete 1:4:8 of 1 cement 4 fine sand & stone ballast of 40 mm size 65 DSR No-4.1.8 66 Providing and laying Kajaria or equivalent brand floor tiles over 20mm thick base of cement mortor (1:4) laid and jointed with white cement slurry. (dsr no-11.39) 67 Providing and fixing 25mm thick PVC flush door shutter made out of one piece multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9-118-3) 68 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:floors wherever required: 69 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR 17.1.1) 70 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 71 W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) 72 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre &operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitablewater inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (DSR 17.80) 73 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 74 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR 17.7.2) 75 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. (DSR 17.16A) 76 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 77 Circular shape 450 mm dia (DSR 17.32.1) 78 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (DSR 18.49.1) 79 15 mm nominal bore 80 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (DSR 18.53.1) 81 15 mm nominal bore 82 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1) 83 25 mm nominal bore 84 Providing and fixing uplasticised PVC connection pipe with brass unions : 85 45 cm length 15mm nominal bore (DSR 18.21.2.1) 86 Providing and fixing uplasticised PVC Water storage tank : 87 1000 literx2 88 Constructing brick masonry manhole in cement mortar 1:4 with R.C.C. top slab with 1:2:4 mix , foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 finished with a floating coat of neat cement complete as per standard designInside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : (DSR 19.7.1) 89 NEW BUILDING 90 Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:D.S.R Code No-2.2.1 91 P/L in position cement concrete of specified grade excluding the cost of Centering and shuttering all work upto plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from Natural sources:8 graded stone aggregate40 mm nominal sizederived from Natural sources .D.S.R Code No-4.1.8 92 Class -150 b/w in 1:6 cement and Coarsesand mortar in foundation andplinth including necessary cutting and moulding of brick work as required…………………complete item.sch no.6.1.2 93 Class 150 brickwork in 1:6 cement mortor in Super structure DSR No-6.1.2+6.5 94 P/L incement concrete in retaining walls.return walls.columns.piers,abutment,pillers,posts,struts of specified grade excluding the cost of Centering and shuttering all work upto plinth level 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from Natural sources:3 graded stone aggregate20mm nominal sizederived from Natural sources .D.S.R Code No-5.2.2 95 M.S Iron work…..complete item 96 p/lof P.C.C 1:2:4 with cement coarse sand and 2 cm gauge stone grit 97 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR NO-13.1.1 98 15 mm cement plaster thick 1:6 cement and fine sand mortar…complete item DSR No-13.2.2 99 Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete. 100 Finishing walls with two coat of acrylic smooth exterior paint of best quality supply of all materials,labour and T&P etc.require for proper comp. DSR 13.46.1 101 Providing and laying 600x600mm vitrified tiles (DSR No-11.41.3) 102 Mild steel or iron of small size and section such as fabrication of door chaukhats grill etc.as per Sl.No.502(i) 103 Paintingone coat of ready mixd paint primingand two coat ofapproved paint including supply ofall material,labour and T&P etc over steel surface Sl.No.644+645 104 Providing and fixing of12 mm thick factory made one side laminated veneer lumberdoor shutter conferming to IS:14616 and TADS 15:2001 (PART-B) Fixing with butt hinges of require commercial quality confirming to IS 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges 105 D.S.R No-9.6.3 106 Providing and fixing( Upvc)double glazed hermetically sealed glazing in aluminium windows(powder coated), ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.9.147A 107 Supply and Fixing of 100 mm dia PVC down pipe 108 Point Wiring : 109 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 110 Group C 111 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 112 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 113 Submains : 114 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 115 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 116 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 117 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 118 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 119 20 mm 120 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 121 5/6 A switch 122 3 pin 5/6 A socket outlet 123 Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 124 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 125 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 126 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 127 1 or 2 Module (75mmX75mm) 128 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 129 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 130 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 131 Upto 450 mm sweep 132 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 133 2 Pair 134 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. (for A.C. Point/MCB Point) 135 Supplying and fixing PVC batten/ angle holder including connections etc. as required. 136 MCBs & DB’s : 137 Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 138 4 way (4 + 12), Double door 139 6 way (4 + 18), Double door 140 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 141 4 way (4 + 12), Double door 142 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 143 Single pole 144 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 145 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 146 100 A,30KA,FPMCCB 147 Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. CAT A 148 Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. CAT A 149 Supply and fixing of40 Amp. FP MCB (10 KA) C Curve. CAT A 150 Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A 151 Earthing Work : 152 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 153 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 154 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 155 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 156 L.T. Switch Panel Board : 157 Lighting Fixtures (Lights/Fans) : 158 Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA 159 Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA 160 Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA 161 Supply and fixing of 3 watt to 6 watt LED(spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) 162 Armoured Cables (Cable/Gland/Lug) : 163 Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 164 size 95 sq mm x 3-1/2core 165 Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earthas per direction of engineer-incharge. for cable 166 size 95 sq mm x 3-1/2core 167 Supply and fixing ofplain or pin type copper tin plated cable socket (lug) to cable leadsfor pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable 168 size 50 sq mm 169 size 95 sq mm 170 Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules. 171 Non-Schedule Items 172 Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. 173 Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. 174 Supply & fixing of 300mm sweep ventilating (Medium Heavy Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Double ball bearing /Copper motor /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 70/85 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 900/1400 RPM. Complete in all respect. 175 Supply & fixing of 400mm sweep wall mounted (Light Duty) fan complete with Plastic Blade & Pull Cord (Adjustable upward and downward tilt mechanism /motor /capacitor etc.) Oscillation degree - 90, Power consumption : 60 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 1350 RPM. Complete in all respect. 176 Less 18.0% G S T
