Tender For Conversion Of Old Administrative Building Hall Into Conference Hall At Ground Floor Of Administrative Building, Jhunjhunu-Rajasthan

Conversion of old administrative building Hall into Conference Hall at Ground Floor of Administrative Building => Limited; 1 Providingand fixing at all height falseceilingincludingproviding and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm center to center one flangefixed to the ceiling withdashfastener 12.5mmdiax40mm long with 6mm dia. bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mmrunning at the rateof1200mm center to center to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centertocentershallbefixedinadirectionperpendiculartoG.I. channel withconnectingclipsmadeout of2.64mmdiax230mmlong G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm center to center with 25mm long drive-allscrews@230mmintervalincludingjointingandfixingtoa flushfinishoftaperedandsquareedgesoftheboardwith recommendedfiller,jointingtapes,finisherandtwocoatsofprimer suitable for board as per manufactures specification and also including thecostofmaking openingsforlight fittings,grills, diffusers,cutouts madewith frameofperimeter channelssuitablyfixedall complete as perdrawing andspecification anddirectionof the Engineer in Charge but excluding the cost of painting with : Fully perforated Gypsum Plaster Board of size 1200 X 2400 X12.5 mm having approx 15% perforated area with perforation size and pattern as approved by the EIC and as per manufacturer’s specification, with all 4 size tapered and back by acoustical tissue with NRC value not less than 0.60 2 Providing & fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95X38.10X0.90 mm at weight 0.637 kg/Rmt with window frame bottom track section 92 X 31.75 X 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 X 31.75 X 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 X 18 X 1.25 mm at weight 0.417 kg/Rmt and handle and top section 40 X 18 X 1.25 mm at weight 0.417 kg/Rmt (Interlocking section 40 X 18 X 1.10mm at weight 0.469 kg/Rmt) as per detailed drawings and as directed by Engineer-In-Charge with all necessary Aluminium Sections fixtures and fastenings such as roller bearing in nylon casting and self-locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel wire mesh with all required screws and nuts.. 3 DISMANTLING WOODEN PARTITION WALL INCLUDING FRAME WORK, COMMERCIAL PLY, DOOR SHUTTER WITH BUTT HINGES, WOODEN BEADING ETC. COMPLETE, AS PER DIRECTION OF ENGINEER IN- CHARGE. LABOUR RATE ONLY 4 Providing wood work in frames ofdoors,windows,clerestorywindows and other frames, wrought framed and fixed in position : Sal wood 5 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats) 6 French spirit polishing: Two or more coats on new works including a coat of wood filler. 7 Providing and fixing teak plywood 6 mm thick, one side decorative veneer confirming to IS:1328 (type-1), for plain lining/cladding with necessary screws including priming coat on unexposed surface with decorative veneer facings on approved manufacturer. 8 Providing and fixing skirting with pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade-I, Type II, IS: 12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for raw plugs etc. and priming coat on unexposed surface complete: 18mm thick 9 Providing and fixing flush door shutters decorative type, core of block board construction with frame of 1st Class hard wood and well-matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 10 PROVIDING AND FIXING BRIGHT FINISHING HYDRAULIC DOOR CLOSER (BEST MAKE OF APPROVED QUALITY) WITH NECESSARY ACCESSORIES AND SCREWS ETC. COMPLETE. 11 PROVIDING AND FIXING BRIGHT FINISHED BRASS 100 MM. MORTICE LATCH AND LOCK WITH 6 LEVERS AND A PAIR OF LEVER HANDLES WITH NECESSARY SCREWS ETC. COMPLETE. (BEST MAKE OF APPROVED QUALITY)

Refer document

Refer document

INR 3.84 Lakhs /-