|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M & L Plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete and embedding for angle iron post, complete all as specified and directed. |
| 3 | Demolition of brick work or stone / bouldermasonry includingall quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass \"B\" bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick cement plasterin cement mortar (1:4) onof brick work or concrete surfaces,finish even and smooth without using extra cement, includingwater proofing compound as per user manual, complete all as specified and directed. Note:- WPC will be measured and paid separately. |
| 6 | Supply only Liquid water proofing compound, complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick cement plasterin cement mortar (1:4) on brick work or concrete surface, finish even and smooth without using extra cement, complete all as specified and directed. |
| 8 | M&L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 9 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified. |
| 10 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 11 | S&F precast factory made polycrete(SRFC) medium duty perforated drain cover, 100mm thick, rectangular in shape upto 1 sqm area each, complete all as specified and directed. |
| 12 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 13 | S&F for Expanded metal, exc 4Kg weight pe sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not lessthan 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete all as specified and directed. |
| 14 | M&L for mild steel work as angles / conduit pipes in posts and struts in fencing / gates including cutting fixing tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting and similar work conforming to Fe 410-0 of (Gde E-165) complete all as specified and directed. |
| 15 | M & L for round bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with themild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed. |
| 16 | Supply only MS Galvanized chain link fencing including line wires, any mesh, size 75 x 75 and type to any type of standards, rails straining bolts, etc including provision of binding wire, complete all as specified and directed. |
| 17 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire. complete all as specified and directed. |
| 18 | M&L Mild steel screw bolts (machine made) with hexogonal are square heads at one end and screwed the other are screwed both ends each screwed both end to be fitted with washres and one hexoagonal are squarenutsexc 5 cm but n.exc 10cm long, diameter of neckexc 11 mm but n.exc 15 mmcomplete all as specified and directed |
| 19 | M&L for formwork to sides of concrete foundations, footings, bases od columns , raft and raft beams , sides and soffits of foundation and plinth beams and similar work vertical or better for rough finished surfaces of concrete complete all as specified and directed. |
| 20 | M&L Form work to pillars, posts, struts, piers, columns and stachions with rough finished, square, rectangular or polygonal concrete surfaces complete all as specified and directed.. |
| 21 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 22 | All as per item No 21 above but 6 to 8 mm dia. & over and including in stirrups, spacers and binders, complete all as specified and directed. |
| 23 | M & L for Reinforced cement concrete (Nominal Mix) type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 24 | M & L for Reinforced cement concrete (Nominal Mix) type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in Columns, pillars, piers, etc complete all as specified and directed. |
| 25 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as incoping/benching, fixing angle iron and all other similar works including necessary formwork complete all as specified and directed. |
| 26 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 27 | Add or deduct for each 25 mm girth or part thereof over or under 30cm for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 28 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240 complete all as specified and directed. |
| 29 | M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed |
| 30 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/hard dense soil, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and directed |
| 31 | M & L Plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in embedding of angle iron post, complete all as specified and directed. |
| 32 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/soose soil complete all as specified and directed. |
| 33 | M&L for Hardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 34 | M & L for plain cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in surface channel or drain or benching in manhole etc complete all as specified and directed. |
| 35 | M&L 100 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base, complete all as specified and directed. |
| 36 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compation by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 37 | M & L for 75 mm thick PCC type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection / path/ any paved area, complete all as specified and directed. |
| 38 | M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base, complete all as specified and directed. |
| 39 | M &L for 25 mm thick cement concrete type B-0 1:2:4 nominal mix (using 12.50 mm graded stone aggregate) as in floor and finishing top surface even and smooth without using extra cement complete all as specified and directed. |
| 40 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushioning, complete all as specified and directed. Note:- Sand shall be measured and paid separately. |
| 41 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 42 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 43 | M&L for rendering 15mm thick cement plasterin cement mortar (1:6) on fair faces of brick or concrete surfaces of walls, facia etc to be finishedeven and smooth without using extra cement, complete all as specified and directed. |
| 44 | M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed. |
| 45 | Taking down of aluminium partition including glass and particle board etc, complete all as specified and directed. |
| 46 | M&L for 25 mm thick bullet resistance glass of size 0.9 m x 0.9 m with secure seal against NIJ level III-A standard fixed to stainless steel frame work in square size, complete all as specified and directed. |
| 47 | M&L for Providing and fixing stainless steel (Grade 304) for railings/baluster/post/ decorative chain made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 48 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specifed and directed. |
| 49 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 50 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets and grid frame work, complete all as specified and directed. |
| 51 | S&F for anodised aluminium snap grid of size 605 X 605mm frame work for false ceiling includinghangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 52 | S&F for Exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed. |
