Work Installation Of New Distribution Transformer And Increasing Capacity In Business Plan-2024-25 Under Edc Hathras., hathras-Uttar Pradesh

work Installation of New Distribution Transformer and Increasing Capacity in Business Plan-2024-25 Under EDC Hathras.- 1 Supply of Following Matarial as per relevent ISS 2 Stone Pad 3 Cross Arm holding Clamp 4 F-Braket 5 Clamp for Tee Channel 6 Earthing Complete 7 D/Pole Clamp 8 AL LUG 400 sqmm 9 I-Hook 10 Bolt & Nuts 11 LT Clamp with Bolt & Nut 12 Pearcing Connector 13 L.T Distribution Box 3-Phase 14 Clamp for Distribution Box 15 Suspension Clamp 16 Dead End Clamp 17 Holding Clamp 18 M.s Top Channel 19 Dropper Channel 20 MS Angle T/F base With Clamp 21 Fuse Set 22 Scope of work 23 Safe Carriage of following material from Electricty store centerHts to Pit site of work through the Kacha and Pakka road includingloading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.) 24 Pcc Pole 8.5 Mtr. Long 25 STP Pole 11 Mtr. Long 26 11 KV Steel Cross Arm V Type 27 11 KV Pin Insulator With Pin 28 11 KV Disc Insulator With Fitting 29 H.T Tee Channel 30 ACSR weasel Conductor 31 Stay set Complete 32 25 KVA 11/0.4 KV T/F 33 63 KVA 11/0.4 KV T/F 34 100 KVA 11/0.4 KV T/F 35 LT XLPE/PVC Cable 3.5x70 Sqmm 36 LT XLPE/PVC Cable 3.5x150 Sqmm 37 XLPE Cable 3x70 sqmm 38 Cable Jointing Kit Suitable for XLPE Cable 3x70 sqmm 39 11 KV TPMO with Polymer Insualator 40 T/F 11/.04 Kv, 250 KVA New 41 LT XLPE/PVC Cable AL 3.5*400 sqmm 42 MS Channel 43 Arreal Bunch Conductor 3x120 sqmm 44 Arreal Bunch Conductor 3x95 sqmm 45 Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work. 46 Pcc Pole 8.5 Mtr. Long 47 STP Pole 11 Mtr. Long 48 Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work 49 11 KV Steel Cross Arm V Type with Clamp 50 11 KV Pin Insulator With Pin 51 11 KV Disc Insulator With Fitting 52 Stone Pad 53 Cable Jointing Kit Suitable for XLPE Cable 3x70 sqmm 54 H.T Tee Channel with Clamp 55 M.S Channel 56 F-Braket 57 D/Pole Clamp 58 AL LUG 400 sqmm 59 I-Hook 60 Bolt & Nuts 61 LT Clamp with Bolt & Nut 62 M.s Top Channel 63 Dropper Channel 64 Pearcing Connector 65 Holding Clamp 66 L.T Distribution Box 3-Phase with Clamp 67 MS Angle T/F base With Clamp 68 11 KV Fuse Set 69 11 KV TPMO with Polymer Insualator 70 Suspension Clamp 71 Dead End Clamp 72 Installation offollowing T/F on newly constructed double pole in proper alignment direction & making HT/LT connection. 73 25 KVA 11/0.4 KV T/F 74 63 KVA 11/0.4 KV T/F 75 100 KVA 11/0.4 KV T/F 76 Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work 77 Safe Dismenteling of old and used following T/F from Double Polewith opening of all HT/LT Jumpers,all works which required for dismentling ofT/F. 78 10/16 KVA T/F 79 100 KVA T/F 80 Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 81 Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer. 82 Laying, sagging and stringing and jumpering / binding etc. ofnew &old ACSR Weasal conductor / GIin 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer. 83 ACSR weasel Conductor 84 LT XLPE/PVC Cable 3.5x70 Sqmm 85 LT XLPE/PVC Cable 3.5x150 Sqmm 86 XLPE Cable 3x70 sqmm 87 LT XLPE/PVC Cable AL 3.5*400 sqmm 88 Arreal Bunch Conductor 3x120 mm 89 Arreal Bunch Conductor 3x95 mm 90 Construction of plinth of size 5 * 5 * 4 above ground level one ft below the ground level of 9 After Exavation of 4 earth brick ballast shall be provided and rammering willbe done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand. 91 Pipe earthing of 250 KVA medium Power Transformers 92 Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut 93 Re Guarding / Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr. 94 Earthing of power T/F (Body & Neutral) 95 Back Cartage of Following Matarial and carriage it up to Store Hathras/ J.E Storeall cost of labour and T&P which required for completion of work 96 10/16 KVA T/F 97 LT PVC Cable 98 100 KVA T/F

INR 5900 /-

INR 26000.0 /-

Refer document