Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-11-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-12-2024 |
| 2 | 13-11-2024 | revised BOQ | BOQ | 25-11-2024 |
| 3 | 13-11-2024 | critical date corrigendum | Date | 25-11-2024 |
| 4 | 05-11-2024 | Extension of critical dates | Date | 23-11-2024 |
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of cement concrete in ground floor,paving,roof nexc 15cm thick(below or above GL) complete all as specified and directed. |
| 3 | M & L for 50mm thick PCC 1:3:6, type C-1, as in Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified & directed. |
| 4 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in levelling course on roof etc. complete all as specified & directed. |
| 5 | M&L 15 mm thick screed bed or bedding layer in CM 1:4 incl water proofing compound including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note-Water proofing compound to be paid for separately. |
| 6 | Supply only integral water proofing compound |
| 7 | M & L water proofing treatment on existing roof including removing exisitng treatment with the following speification complete(a) Apply bituminous primer @ 0.5 Ltr/Sqm confirming to IS 3384-1965 on prepared surface till the surface is properly pregnated(b) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (c) Laying App based polimeric water proofing membrane minimum weight not less than 3.0 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/sqm) laid on primed surface by forced application complete with as per manufacturer instructions confirming to IS complete all as specified and directed. |
| 8 | Demolition of brick work, stone/boulder masonary built in cement mortar complete all specified and directed. |
| 9 | M&L for Pre-cast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,complete all as specified and directed. |
| 10 | M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed |
| 11 | M&L Stone walling of random rubble, brought upto course, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed. |
| 12 | M&L Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed. |
| 13 | S&F 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length with rubber ring joints,as in weep holes complete all as specified and directed. |
| 14 | M & L for flush pointing to random rubble masonary, brought upto courses in CM 1:4 complete all as specified and as directed by the Engineer-In-Charge. |
| 15 | M&L PCC 1:2:4 Type B1 (20mmgraded agg) as in steps, copings,kerbs and like incl weathering slightly rounded or chamfered angles and throating as directed |
| 16 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed. |
| 17 | M&L 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for Preparing new plastered wall surfacesandapplying two coat of oil emulsion distemper over a coat of plaster of paris putty of 1mm thckness over plastered surface to prepar the surface even and smooth complete all as specified and directed. |
| 20 | M&L for preparing newly plastered surface of wall apply two coat of cement base paint over a coat of white wash complete all as specified and directed. |
| 21 | M&Lthree coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 23 | M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed |
| 24 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over screed bed,rendering or bedding layer of mortar CM (1:6) 15mm thick all as specified and directed |
| 25 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in skiritng etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over rendering in CM (1:4) 10 mm thick all as specified and directed. |
| 26 | M&L for coloured glazed ceramictiles in vertical surface, 450x350x7-8mm thick set and jointed in neat sement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed. |
| 27 | M&L for Chequered coloured cement concrete tiles 30cm x 30cm x 20 mm thick set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floor including 15 mm thick screed bed or bedding layer in CM 1:6complete all as specified and directed |
| 28 | M&L Granite (of any type) tiles 18-20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in CM 1:6 etc complete all as specified and as directed |
| 29 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 30 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 31 | Taking down shutter exc 1.0 sqm but n exc 2.00 sqm each complete all as specified and directed. |
| 32 | S&F for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and slides) & hanging, also fastening & fixingFe-290, Gde-165 complete all as spfd & directed. |
| 33 | S&F 0.63 mm th Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required complete all as spfd & directed. |
| 34 | S&F 35 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 35 | M&L for 2nd class hardwood, 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc. devided into squares, with plain, chamfered or rounded , mitred and rebated shash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc; size of members of shutter as specified in SSR Part I, Sectioin 8clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed |
| 36 | S&F for powder coated anodised aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fastners/rawl plugs etc. complete all as specified and directed. |
| 37 | S&F powder coated aluminiumdoor shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 38 | S&Fpowder coated Anodised aluminium window and ventilator shutters, side hung typewithout sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 39 | M&L fordouble action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel covr, governing pivo made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 40 | S&F 100 mm Mortice lock,vertical type, size 100 mm complete all as specified and directed. |
| 41 | S&F Door closer hydraulically regulated, designation No. 2,aluminium die cast body universal type complete all as specified and directed. |
| 42 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floors 150mm long all as specified and as directed. |
| 43 | M&L for 18/19mm thick medium density fibre board, exterior grade, fixed with screws to timber frame work all as spfd and directed. |
| 44 | S&F 3-6mm thick teak wood lipping fixed with nails to fibre board/particle board all as spfd and directed. |
| 45 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) all as specified. |
| 46 | S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed. |
| 47 | S&Fcatch magnet for cupboard shuttercomplete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or descrption) from metal/wooden frame including punching or driling outold glazing pins/springs and providing new ones complete all as specified and directed. |
| 49 | S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty/rubber packing in square exc .50 sqm in each panels complete all as specified and directed. |
| 50 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in square n.exc .50 sqm in each panels complete all as specified and directed. |
| 51 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 52 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 53 | S&F 100 mm mild steel but hinges medium weight,cold rolledcomplete all as specified and directed |
| 54 | S&F 150 mm aluminium handles, cast type anodisedcomplete all as specified and directed. |
| 55 | S&F150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed |
| 56 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 57 | S&F 150 mm Mild Steel barrel tower bolts, stove enamelled, black with bright bolts complete all as specified and directed |
| 58 | S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 59 | S&F 200mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 60 | Dismantling mild steel work of any description and in any position complete all as specified and as directed. |
| 61 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc. |
| 62 | S&F in repairs vitrous china wash basin,white flat back size 550X400mm incl 32mm size waste fittings, brass chromium plated,waste pipe and brackets fixing in position complete all as specified and directed. |
| 63 | S&F in rep vitreous china squatting pan \"Orissa pattern\" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as spfd & directed. |
| 64 | S&F in repair Vitreous China Wash down water closetEWC with plastic seat cover complete all as specified and as directed . |
| 65 | S&F in repair sinks made of stainless steel 1 mm th kitchen or laboratory with plugs, washers & waste coupling, incl bedding in CM to dwarf wall or incl fixing cantilever brackets & connecting union to pipe over all size 495x420mm bowl size 410x330 mmx160 mm complete all as spfd & directed. |
| 66 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortarto dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 914 mm x 460 mm ,bowl size 405 mm x 354 mm complete all as specified and directed. |
| 67 | S&F for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etcas spd and fixed in repair all as specified and directed |
| 68 | S&F in repair Tubular towel rail brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 69 | S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and cleats complete all as specified and directed |
| 70 | S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 71 | S&F in repairsstop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 72 | S&F in repairs Brass CP mixer fancy type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F 15mm Pillar taps, cast copper alloy,with capstane heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as spfd & directed. |
| 74 | Supply only 15mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as spfd & directed. |
| 75 | S&F in repairs Stainless steel soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 76 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 77 | S&F in repairs plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devise complete all as specified and directed. |
| 78 | M&L for32mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in reapirs complete all as specified and directed |
| 79 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed. |
| 80 | S&F PVC waste pipe 32/40mm dia for wash basin/kitchen sink/urinals in repairs complete all as specifiedand as directed. |
| 81 | S&F in repair 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 82 | S&F in repair 15 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 83 | S&F in repairs Brass chromium plated shower rose 125mm sizeincluding shower arm of min. 30 cm length complete all as spfd & directed |
| 84 | S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed. |
| 85 | S&F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubingcomplete all as spfd & directed |
| 86 | S&F 20 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 20 mm GI tubingcomplete all as spfd & directed |
| 87 | S&F in repairs Health Faucet (ABS Body) MS, Chromium platedsuitable for 15mm dia pipe with 1.25 mtrlong flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 88 | S & F in repair Harrison rails/curtain rods, mild steel, chromium plated with brackets,stops, rollers etc fancy type as approved complete all as specified and directed. |
| 89 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as spfd & directed. |
| 90 | Supply and fix 1000 Ltr rotational moulded polyethylene water stotage tanks triple layered ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantlling old water tank, complete all as specified and directed. |
| 91 | Supply and fix 500 Ltr rotational moulded polyethylene water stotage tanks triple layered ( cylinderical vetrticle with closed top) hoisted & fixed in positioincluding dismantling old water tank complete all as specified and directed |
| 92 | S&F in 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 93 | S&F in repair 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 94 | S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 95 | Supply and fix in repairs CP Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and directed |
| 96 | S&F in repairs PVC acrylic toilet cabinet mirror appx size 622mmx422mm with shelves, shutter and mirror complete all as specified and directed. |
| 97 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,fittings etc.as specified and directed. |
| 98 | S&F False Ceiling Horizontal level regular edge grid 600 x 600 mm form work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as spfd and directed. |
| 99 | S&F 5 to 8mm thick PVC hollow type wall panellingany color fixed to wall/ceiling with L or U shaped beading at ends fixed with screws complete all as specified and as directed. |
| 100 | M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling/ walling with screws to timber frame work complete all as sfd and directed. |
| 101 | M&L II nd classhard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed |
| 102 | Dismanteling of timber scantling 40 sqcm and over in section in any position for unframed workscomplete all as specified and directed |
| 103 | M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed. |
| 104 | Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed. |
| 105 | M&L for II nd classhard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcmcomplete all as specified and directed |
| 106 | M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed. |
| 107 | Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as spfd and directed |
| 108 | S/F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with \"L\" type or \"J\" type or cranked hook bolts fixed to roof covering/cladding to wall complete all as spfd & directed |
| 109 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 110 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 111 | M&L for two coat of synthetic enamel paint overa coat of pink primer to new/old wooden surface of any description exc 10 cm girth or width including prepration of new/old wooden surfaces complete all as specified and directed |
| 112 | M/L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed. |
| 113 | M&L for Preparing old surfaces, plastered or unplasterd old decorated wall surfacesandapplying two coat of oil emulsion distemper over a coat of plaster of paris putty of 1mm thckness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 114 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and includingpriming coat of exterior primer applied @0.90 liter/10 Sqm over old surfaces including complete removal of exisiting treatment complete all as specified and directed. |
| 115 | M & L for one coat of white wash on old decorated wall surfaces including preparation all as specified and directed |
| 116 | M & L for one coat of white wash on old decorated ceiling surfaces including preparation all as specified and directed |
| 117 | M & L One coat of Oil bound distemper on old decorated wall surfaces including preparation all as specified and directed |
| 118 | M & L one coat of Cement based painton old decorated wall surfaces including preparation all as specified and directed |
| 119 | M & L for preparation of old decorated steel surfaces andapplying one coat of synthetic enamel paint complete all as specified and directed. |
| 120 | M & L for preparation of old decorated wooden surfaces andapplying one coat of synthetic enamel paint complete all as specified and directed. |
| 121 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 122 | M&L Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like using cement concrete type B-0 1:2:4 complete all as specified and directed |
| 123 | S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed |
| 124 | M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 125 | Cleaning of septic tanks / manholes of any depth and of any size/description by taking out semi solid/solid, silt and any other waste including removing the waste to a distanceexceeding 50 metre but out side of MD land and burried in the pit excavated upto 15 cm depth below the GLand cover with excavated soils after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases and refixing man hole cover slabcomplete all as specified and directed. Note:(i) The mode of measurement shall be considered 20% of the actual volume of septick tank / manholes (upto depth containing human excreta and water)(ii) The cost of excavation of pit ,bleaching powder and RFR to cover the sludge shall deemed to be inclusive in rate quoted by the contractor.(iii)The sludge / solid / semi solid contents shall be collected by the contractor in a closed sewage disposal tanker and transported to out side the ministry of defence land and disposed off in the locations as per contonment board/ municipal by lodge in area. All the the tools and plants including mechanical pump, closed lorry and other allied arrangements for making septic tank clean andfunctional will be made available by the contractor with out any extra cost to the Govt. |
| 126 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement incl removing of existing railing complete all as specified |
| 127 | E&M |
| 128 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, regulators, sockets and light fittings etc and removing materials to store for taking credit or re-use and making good disturbed surfaces of walls, floors complete all as specified and directed. |
| 129 | M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in PVC conduit of suitable size of size not less than 20mm, complete with all accessories / fitting and Ist class hard wood (Shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light point/fan point controlled by one way switch of 5/6 amps. |
| 130 | ~Ditto~ all as per item No 128 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 amps. |
| 131 | ~Ditto~ all as per item No 128 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 amps. |
| 132 | M&L power point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in PVC conduit not less than 20mm dia, complete with all accessories /fitting and Ist class hard wood (shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly including complete all as specified and directed for 5 pin, 15/16 amps power socket complete all as specified. |
| 133 | S&F switch piano flush button single pole one way 5Amps complete all as specified. |
| 134 | S&F switch piano flush button single pole one way 15Amps complete all as specified. |
| 135 | S&F socket out let 3 pin 5/6 Amps flush type complete all as specified. |
| 136 | S&F socket outlet two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified. |
| 137 | S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified. |
| 138 | S&F lamp holder PVC / poly carbonated type with back plate suitable for pendants /angle /batten fittings complete all as specified. |
| 139 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified. |
| 140 | S&F heavy duty plug top poly carbonated type 5 Amp, 3 pin, 240 V AC white in colour & ISI marked complete all as specified. |
| 141 | S&F heavy duty plug top poly carbonated type 16 Amp, 3 pin, 240 V AC white in colour & ISI marked complete all as specified. |
| 142 | S&F bed switch 6A, one way made of polycarbonate materials complete all as specified. |
| 143 | PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep or 2 way complete all as specified. |
| 144 | PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 150 mm and 50 mm deep or 4 way complete all as specified. |
| 145 | PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep or 8 way complete all as specified. |
| 146 | S&F in replacement sheet metal enclosure for DB SPN 4 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified. |
| 147 | S&F in replacement sheet metal enclosure for DB SPN 8 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified. |
| 148 | Supply and fixing 240V, 10 KA \"B\" curve type miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection, testing and commissioning complete all as specified. |
| 149 | Supply and fixing 240V, 10 KA \"C\" curve type miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 32 AMP, in the MCB DB complete with connection, testing and commissioning complete all as specified. |
| 150 | Supply and fixing 240V, 10 KA \"C\" curve type miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 40 AMP, in the MCB DB complete with connection, testing and commissioning complete all as specified. |
| 151 | Supply & fix in replacement natural white LED PC batten fitting 1x20 watt, 220 v, 6500K, 110 lum/watt, AC decorative box type with driver, internally pre wired including making connection up to ceiling rose with three core flexible copper conductor cable of suitable size complete all as specified. |
| 152 | Supply and fix in repl of rechargeable LED bulb 12watt, Cool white, B22d cap, 6500K, 190-270 volts, 50 Hz with PF>0.9 complete all as specified. |
| 153 | Supply and fix in repl of LED bulb 9watt, warm white, B22d cap, 3000K, 190-270 volts, 50 Hz with PF>0.9 complete all as specified. |
| 154 | Supply and fix in repl of LED bulb 5watt, warm white, B22d cap, 3000K, 190-270 volts, 50 Hz with PF>0.9 complete all as specified. |
| 155 | Supply & fix in replacement warm white LED PC batten fitting 1x9/10 watt, 220 v, AC decorative box type with driver, internally pre wired including making connection up to ceiling rose with three core flexible copper conductor cable of suitable size complete all as specified. |
| 156 | S&F 1x35/36 watt LED building security light fitting, with and including GI bracket made out of 0.9 to1.2 mtr GI pipe bent to shape light grade of 25mm dia, bracket clamps nut bolts and washers etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductor cable complete all as specified. |
| 157 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified. |
| 158 | Taking down solar water heater of capacity 300-500ltr, dismantling hot & cold water tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, rethreading of inlet/outlet pipe 20 mm dia, reassembling the same after replacing unsv items i.e. heating element, thermostate, toughned glass tube or flate plate collector, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified.Note: Spare parts (heating element, thermostate, toughned glass tube) shall be measured and paid separately under appropriate items as supply only. |
| 159 | Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) including taking down old heating element complete all as specified. |
| 160 | Supply only thermostate for solar water heater. |
| 161 | Supply only evacuated solar tube made of toughned glass blue in colour as same as existing for evacuated tube type solar water heater complete all as specified. |
| 162 | Taking down carefully storage water heater of capacity 25/35 ltr, dismantling tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, rethreading of inlet/outlet pipe 15 mm dia, reassembling the same at existing /new location including necessary fasteners to ensure proper safety as reqd at site, testing and commissioning after re-installation at site complete all as specified.Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below. |
| 163 | Supply only thermostate fitting fitment varying capacity for 25/35/50ltrs capacity geysers. |
| 164 | Supply only PVC connection pipe nylon threaded 15mm size with brass nuts copping in both end of length 600mm for geysers complete all as specified and directed. |
| 165 | Supply only heating element of 1.5/2.0 KW for geyser (as per sample ISI brand) including taking down old heating element complete all as specified. |
| 166 | Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing all as specified.Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below. |
| 167 | M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified. |
| 168 | Supply only Ball bearing for ceiling fan after and including taking down old unsv ball bearing complete all as specified. |
| 169 | Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified. |
| 170 | Supply only tape roll insulation (1.8cm x 6.5m x 0.125mm) suitable for 1.1KV grade best quality, good adhesive as sample held with AGE office complete all as specified. |
| 171 | S&F rigid non-metallic 20mm dia PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified. |
| 172 | S&F rigid non-metallic 25mm dia PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified. |
| 173 | Labour only for point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in existing PVC conduit, all accessories / fittings and Ist class hard wood (Shisham) terminal switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light / fan / sockets point controlled by one way switch of 5/6 amps. |
| 174 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified. |
| 175 | Supply and fix exhaust fan, made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding of size 200mm sweep with blades and frame complete all as specified. |
| 176 | Supply only cable 6sqmm with copper conductor PVC round sheathed (flexible) industrial twin core cable complete all as specified. |
| 177 | Supply, fixing, testing and commissioning 1100 volts grade heavy duty 10 sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire, one twin core cable circular in shape incl taking down unsv cable complete all as specified. |
| 178 | S&F MCCB of capacity 200 Amp 4 pole, 415 V, 50 Hz 36 KA with adjustable thermal and adjustable magnetic protection release to existing LT panel board, making all connections including suitable lugs, testing commissioning including taking out unsv MCCBs by disconnecting all electrical connection on existing position from LT Panel board complete all as specified. |
| 179 | S&F in replacement of manual changeover switch-disconnector 32 Amp, single phase, (conforms to IEC 60947-3, IS/IEC 60947-3) ON LOAD type with and including sheet metal enclosure complete all as specified. |
| 180 | S&F in replacement of manual changeover switch-disconnector 100 Amp, three phase, (conforms to IEC 60947-3, IS/IEC 60947-3) ON LOAD type with and including sheet metal enclosure complete all as specified. |
| 181 | Labour only for dismantling and taking down street light fittings for repair/replacement including GI bracket and connection wire from light fitting to overhead line or pole box complete all as specified. |
| 182 | S&F LED street light luminaires of capacity 45 watt 230V AC outdoor type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including making necessary connection with suitable size cable complete all as specified. |
| 183 | S&F bracket made out of GI pipe 1.20 mtr long of 32 mm dia medium grade bent to shape at 100-120 degree including flat iron clamps and suitable size nuts-bolts and washers including one coat of anti corossive primer and two coats of aluminium paints complete all as specified. |
| 184 | Supply and fixing LED flood light 100 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified. |
| 185 | Dismantling insulators any type, any size complete all as specified and directed. |
| 186 | S&F pin type procelain white/ brown/ green/insulator (inplace of defective one) including galvanised mild steel spindle, two galvanised iron Washers and one galvanised iron nut,100mm height 65mm dia for 1100 volts grade complete all as specified and directed. |
| 187 | Labour only for tightening, stringing of ACSR conductor or AB cable of any size for LT over head lines on poles including binding with aluminium winding wire & testing complete all as specified and directed.Note:- Distance between two pole considered as one span. |
| 188 | Cleaning of rotational moulded polyethylene water storage tanks by removing of scale and dirt etc from tank and from mouths of circulating pipes etc of capacity exceeding 250 ltr but not exceeding 500 ltr complete all as specified.Note- Date of cleaning shall be mentioned on tank with synthetic enamel paint and cost of same is deemed to be included in the rates quoted by tenderer2. All tools and materials for cleaning the tank should be arranged by contractor. |
| 189 | Cleaning of rotational moulded polyethylene water storage tanks by removing of scale and dirt etc from tank and from mouths of circulating pipes etc of capacity exceeding 1000 ltr but not exceeding 2000 ltr complete all as specified. Note- Date of cleaning shall be mentioned on tank with synthetic enamel paint and cost of same is deemed to be included in the rates quoted by tenderer2. All tools and materials for cleaning the tank should be arranged by contractor. |
| 190 | Cleaning of water storage tanks of capacity 10000 ltrs by removing of scale, dumped sand, silt, debris and dirt any other foreign materials present in tanks/ walls and scrubbing out the floor etc. from mouths of circulating pipes etc and replacement of ball brass valve, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed made of brass materials complete all as specified.Note-1.Date of cleaning shall be mentioned on tank with synthetic enamel paint and cost of same shall be deemed inclusive in quoted unit rate.2. All tools and materials for cleaning the tank should be arranged by contractor. |
| 191 | Taking up or down 50 mm dia bore GI tubing, and connections, including cleaning for re-fixing or removal to store complete all as specified. |
| 192 | Supply, fixing & laying of 50 mm dia bore GI tubing, medium grade with and including all fittings and fixture like socket, nipple, elbow, reducer etc complete laid in trenches or laid in floor complete all as specified. |
| 193 | S&F in replacement Gun metal gate valve with iron wheel head screwed both ends for GI steel tubing 50mm dia complete all as specified. |
| 194 | Taking up or down 25 mm dia bore GI tubing, and connections, including cleaning for re-fixing or removal to store complete all as specified. |
| 195 | Supply, fixing & laying of 25 mm dia bore GI tubing, medium grade with and including all fittings and fixture like socket, nipple, elbow, reducer etc complete laid in trenches or laid in floor complete all as specified. |
| 196 | S&F in replacement Gun metal gate valve with iron wheel head screwed both ends for GI steel tubing 25mm dia complete all as specified. |
| 197 | Taking up or down 20 mm dia bore GI tubing, and connections, including cleaning for re-fixing or removal to store complete all as specified. |
| 198 | Supply, fixing & laying of 20 mm dia bore GI tubing, medium grade with and including all fittings and fixture like socket, nipple, elbow, reducer etc complete laid in trenches or laid in floor complete all as specified. |
| 199 | S&F in replacement Gun metal gate valve with iron wheel head screwed both ends for GI steel tubing 20mm dia complete all as specified. |
| 200 | Note : Tenderers may note that amount of credit Rs 1,37,886.20 will be deducted from the total amount arrived, at the time of Acceptance of contract. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
