Tender For providing Of Deficient Single Ofrrs Accn Under Ge 874 Ews, Job No- W/Amwp-02/Dawar/2023-24-- 1 Rough excavation not exc 1.5 m deep and getting out in any type of soil all as specified. 2 Removing excavated material to be a distance exc 50m but not exc 100 m and deposting where directed at a level n exc. 1.5m above the starting piont complete all as specified. 3 Removing excavated material to be a distance exc 250m but not exc 500 m and depositing where directed at a level n exc. 1.5m above the starting piont complete all as specified 4 Excavation in trenches not exceeding 1.50m wide and not exc 1.50m in depth and getting out in soft / loose soil all as specified. 5 -Ditto- all as per ser item No 4 here in above but depth exc 1.5 m but n exc 3 m 6 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified 7 M&L Sand filling under floors or in foundations Spreading and levelling in layers n exc. 25 cm thick including well ramming including watering as required watering and consolidation complete all as specified. 8 M&L PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in foundation mass concrete all as specified. 9 M&L RCC work M-30 Design Mix (using 20mm gradedcrushed stone aggregate )as in foundation including, raft, plinth beam bases for column etc basement slabs under rammed piles and mass concrete all as specified. 10 M&L RCC work M-30 Design mix (using 20mm graded crushed stone aggregate) as in columns pillars, piers posts and struts all as specified. 11 M&L RCC work M-30 design Mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers bressumers, lintel over 1.5 mtr span all as specified. 12 M&L RCC work M-30 design mix (using 20mm graded crushed stone aggregate) as in slab supported in walls cantilevers etc complete all as specified and directed 13 M&L RCC work M-30 design mix (using 20mm graded crushed stone aggregate) as in Chajjas all as specified. 14 M&L RCC work M-30 design mix (using 20mm graded crushed stone aggregate) as in Chullah hoods; stairways(except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres all as specified. 15 M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed 16 -Ditto- all as per ser item No15 above but 5mm to 10mm dia as in stirrups, spacers binders etc 17 M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified. 18 M&L form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter all as specified. 19 M&L form work to side of pillar posts struts piers columns etc all as specified. 20 M&L form work to sides and soffits of floor or roof beam, beam nauching, griders, bressum- mers lintels cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc all as specified 21 M&L form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizonal or sloping) all as specified 22 M&L form work to chullah hoods, chajjas, throughs and similar items including edges all as specified 23 M&L form work to staircases with sloping or stepped soffits including risers and stringers (excluding landing) all as specified 24 M&L brick work with old size sub class B bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1.6 complete all as specified 25 M&L brick work with old size sub- class B bricks, straight or curved on plan to any radius in half brick thick walls built in Cement mortal 1:6 complete all as specified 26 M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating including necessary form work all as specified and directed. 27 M&L 15mm thick cement plaster on brick concrete surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even all as specified & directed.Note:- WPCshall bemeasured and paid seprately. 28 Supply only water profing compound as per IS-2645 all as specified 29 M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement all as specified 30 M&L rendering plaster 5 mm thick in CM 1.3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. 31 M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7 mm thick over and including 10 mm back coat plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed, complete all as specified & directed 32 M&L for Vitrified tiles(dark shade/double charged/ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as on vertical surfaces over 10 mm back coat plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed 33 M&L for Vitrified tile 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1.6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed 34 M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed 35 M&L 18mm thick Granite (of any type) in flooring/landing (table rubbed and polished) including 20 mm thick screed Bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admicture pigements to match the shade of granite all as specified 36 M&L 18mm thick Granite (of any type) in Flooring (table rubbed and polished) and step of stair case including 20 mm thick Screed Bed in cement mortar (1:4) including pointing in white cement (1:2) using marbie dust with admicture pigements to match the shade of granite all as specified 37 M&L 18mm thick Granite (of any type) For Wall /dado & skirting of riser of step (table rubbed and polished) including 15 mm thick back coat plaster in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admicture pigements to match the shade of granite all as specified 38 M&L for 75 mm thick PCC 1:4.8 Type D-2 (using 40 mm graded stone agg) as in sub base of roof/floor/pavings/path etc all as specified. 39 M&L for 25mm thick PCC 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as in levelling course of floors all as specified 40 M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15mm thick, watered and well reammed to a true surface all as specified. 41 M&L distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification, two or more coats on new work wall/celling including one coat of primer all as specified. 42 M&L finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified. 43 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed. 44 M&L for preparation of newly untreated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. 45 M&L providing and applying cement base putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed 46 S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face covered with deco rative face veneer with lipping/frame to match commercial type on both sides complete all as specified and directed. 47 M&L for factory made 35mm Glazed and skeleton shutters, for open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beadss, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied andfitted to chowkats as directed by Engr-in-Charge. 48 M&L 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed 49 S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing on page No 181 of MES SSR Part-II 50 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing 51 S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long type B1 all as specified 52 S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 75mm long type C21 all as specified 53 S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long all as specified. 54 S&F Aluminum anodised, barrel tower bolts of extruded section and fixed ISI marked 100mm long all as specified 55 S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked all as specified 56 S&F extruded aluminium alloy handles 150mm size fabricated type anodized ISI marked all as specified 57 S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete 58 M&l floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 140 mm Complete all as specified 59 S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts all as specified 60 S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to wooden/steel frames with beading complete all as specified & directed 61 S&F Aluminium powder coated (thickness of powder coating not less than 50 micron) as in ventilators fixed with 4mm thick 100mm wide frosted glass louvers fixed with louvers section attached with clips and fixed on frame size of frame is 104mmX45.60mm thickness 3 mm, weight per kg /mtr 1.705 and one mosquito proof shutter frame size 44.50mmX25mm thickness1.40mm and weightr kg/mtr 0.560.single leaf cut to size, jointed Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples together with cadium plated steel screwes including rubber packing aluminium beading or gasket for aluminium section for fixing of glass sheet and wire cloth necessary fittings complete screwews plugs complete all as directed Note: Aluminium frame, shutter, glass, wire cloth, louvered and accessories are included in above description. 62 S&F powder coated aluinium window (thickness of powder coating not less than 50 micron) having three track section using Jindal or equivalent section as under:-(a) 3 Track frame section Top/Side=20958 unit weight 0.759 Kg/m (b) 3 Track frame section Bottom =20957 unit weight 0.911 kg/m (c) Shutter section as below Handle section =20807 unit weight (d) 0.325kg/m Bearing bottom and Top =20963 unit weight 0.488kg/m (e) Interlock section=20806 unit weight 0.380kg/m (f) mounted on bearing to slide on track plain anodised of approved colour including S&F of 4 mm thick frosted/plain glass and wire mesh with glazing clip, Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples pvc track gasket, EPDM rubber gasket on glass of weather tightening alongwith recessed type handle and lock including sealing gap with marble /granite surface with silicon sealent taking it water proof in all manner complete all as specified and directed by Engineer in ChargeNote:- Aluminium frame, shutter, glass, wire cloth, louvered and accessories are included in above description 63 S & F for Powder coated aluminum grill DG-104 of mesh 75mm x 75mm x 10mm thick complete all as specified and directed 64 Supply and fixing mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original complete all as specified and as directed. Note: The measurement shall be taken of front elevation and not girthwise 65 S&F in repairs Stainless Steel drapery rod of 20 mm inner dia (in length as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed 66 M&L for false ceiling with Armgyp-FBmake armstrong or equivalent ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted Tee or L section (concealed Gl frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturers instructions, complete, all as directed and specified.(a) Size of grid - 610 x 610 mm.(b) Size of main Tee - 39 x 24.70 x 0.80 mm.(c) Size of cross Tee39 x 24.70 x 0.80 mm.(d) Size of wall angle - 22.20 x 22.20 x 0.65 mm. 67 M&L 2nd class soft wood wall paneling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints chamfered both sides fixed to frame work with secret nailed as in wall panneling 15mm including cornice and beading as required and applying two coat of melamine polish including sanding/filler repair /sealer coat. Note-: frame work shall be measured and paid separately. 68 M&L second class softwood as in scantling clean sawn fixed in position with nails unframed work complete all as specified and directed by Eng-in-charge 69 M&L roof trusses (framed), made of Fe 410-W (GdeE-250) quality A /square of hollow section trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified 70 S&F plates (Plain or chequered) channels square cut or notched made of Fe 410-W Kg (GdeE-250) quality A (ordinary and counter sunk) forming holes, without any attachment all as specified 71 S&F plates (Plain or chequered) channels square cut or notched made of Fe 410-W (GdeE-250) quality A (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment 72 M&L MS screw bolt diameter of neck 11 to 15mm (machine made) with hexagonal head at one end screwed the other or screwed both ends, each screw end fitted with washers and one hexagonal nut exc 5cm but n exc 10cm complete all as specified and as directed by Engr-in-Charge 73 S&F Pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified 74 S&F Pre-painted galvalume aluminum zinc coating Gl based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified 75 S&F 15mm dia bib tap cast coper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed all as specified 76 S&F 15mm dia angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union all as specified 77 S&F swivel shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed 78 S&F 15mm dia concealed stop valve/angle valve of copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for 79 S&F 600mmx450mx5mm thick looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood incl framing and fixed to wooden plugs with chromium plated screws & cup washers & fixed in repair i/c taking out old 80 S & F vitreous china wash basin with pedestal, white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe. one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed 81 S&F 32 mm dia PVC flexible waste pipe for WHB/Sink 750 mm long with PVC coupling all as directed . 82 S&Fsheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed on wall with PVC rawl & cadmium plated brass screws complete all as specified & directed 83 S&F tubes medium grade galvanised with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floors of 20 mm bore all as specified 84 S&F tubes medium grade galvanised with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore all as specified. 85 S&F PVC connection 15mm size with PTMT nuts of length 600mm all as specified. 86 S&F Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified 87 S&Fgrating doom 125 mm dia with waste hole of Stainless steel (Min wt 20 gms) all as specified and directed 88 S&F Mirror cabinet (PTMT) 450mmX350mm fixed on wall with cadmium plated brass screws all as specified and directed. Make: Prayag (Cat Part No. 557) or equivalent 89 S&F chromium plated brass toilet paper holder, complete all as specified 90 S&Fbrass chromium plated soap dish, complete all as specified. 91 M&L for CP brass jet assembely for EWC with PVC connection ascomplete all as specified 92 S&Fbrass chromium plated towel ring including a pair of CP brass bracket complete all as specified and directed by Engr-in-Charge 93 S&F one piece EWC with slim soft close seat cover 650X350X765mm straight line design square bowl vitreous china wash down water closed pan (pedestal pattern) including integrated flush tank white colour including P or S trap etc complete all as specified and directed 94 S&Ftuffened glass corner acrylic shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified. 95 S&Fhealth facuet chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC complete all as specified & directed by Engineer-in- Charge 96 S&F 15mm bore Two way Angle valve chromium plated screwed plated screwed down,high pressure with capstan heads screwed both ends for iron pipe or for union. 97 S&F15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed. 98 S&F Brass CP wall mixer 3 in 1 with L-Bend mixing hot & cold water screwed down for iron pipe and fixedall as specified. 99 S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or round all as specified. 100 S&F 110mm dia PVC (SWR) pipes type- B single sockets, in any length with rubber ring joints, fixed to walls as per site requirement complete all as directed. 101 S&F 110mm dia PVC (SWR) pipes type-B single sockets, in any length with rubber ring joints, laid I trenches or in floor complete all as directed. 102 S&F PVC (SWR) door bends 110 mm bore type- B all as specified. 103 S&F PVC (SWR) door bends 75mm mm bore type- B all as specified. 104 S&F PVC (SWR) Single door T 110mm mm bore equal or unequal type- B all as specified. 105 S&F PVC (SWR) Si ngle door T 75 mm mm bore equal or unequal type- B all as specified. 106 S&F PVC(SWR) Vent cowl 75mm dia complete all as directed. type-B all as specified. 107 S&F 75mm dia PVC (SWR) pipes type-B single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. 108 -Ditto- all as per item No 107 here in before but fixed to walls with clamps complete all as specified 109 S&F PVC (SWR) bends type-B 75mm dia any radius complete all as specified and directed. 110 S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm pipe all as specified 111 S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm pipe all as specified 112 S&F PVC (SWR) floor trap, 75mm plain with grating including jointing with solvent cement all as specified 113 S&F PVC (SWR) floor trap, 100mm plain with grating including jointing with solvent cement all as specified 114 S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified 115 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified 116 M&L cement cocnrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in plinth protection 75mm thick and surface to be finished even and smooth without using extra cement. Plinth protection shall be laid in pannels n.exc 1.50 mtr 6mm wide and 10mm deep joints shall be made between wall & pinth protection and between panels. Joint shall be filled with bitumen mastic and sand in proporation 1:3 ( one part of bitumen and three part of sand)complete all as specified. 117 M&L water proofing treatement for sunken portionas follows :-(a) Maintain the Sunken to a slope of 1:40 outward with 32mm dia Gl pipe spout projecting at least 150 mm beyond outer face of wall.(b) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls(c) M&L floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, (d) M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non-woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application.(e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani/ floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks.(f) 32 mm dia Gl spout shall be provided to drain out leakage, if any. 118 Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, for road to be required slope gradient camber etc complete all as directed 119 M&L 75mm thick cement concrete as in sub base type C2, 1:3:6 (40 mm gde stone aggregate) as in sub base all as specified. 120 M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658- 2006, M-35 Grade complete all as specified and directed 121 M&L for 25 mm sand cushion under paving block including watering and consolidation for interlocking tiles all as specified 122 M&L providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed 123 Excavating over areas n exc1.5m deep and getting out in hard and dense soil all as specified. 124 Excavating over areas exc1.5m and n. exc 3.0m deep and getting out in hard and dense soil all as specified. 125 M&L for PCC (1:24), type B1 using 20 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed 126 M&L brick work with sub clause bricks old size in one brick thick walls in CM 1:4 in honey combing walls all as specified. 127 M&L Precast Cement Concrete (1:2:4) type B1 using 20mm graded agg as in landing, cover slab (for manhole etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces set in CM (1:4) all as specified. 128 M&L reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified. 129 M&L plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes aller they are laid and tested for 150 mm bore SGSW pipe complete all as specified 130 S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified. 131 PVC (SWR) vent cowl 75mm dia all as specified. 132 M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation & mass concrete all as specified. 133 M&L walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1.4 134 Extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n exc 40mm dpression granite or trap stone all as specified. 135 M&L rendering plaster 20 mm thick in cm 1:4 on on stone masonry surfaces complete all as specified and directed 136 Extra for forming fair finished drain or channel 30cm inner girth in cement cocrete using extra cement including forms moulds, mitred /stopped ends etc all as specified. 137 Point wiring with 1.5 Sqmm copper conductor FRLSH (Stranded) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduits, medium grade, ISI marked not less than 20 mm dia with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FRLSH as earth wire connected to common earth dolly and including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc.covered with 3mm thick plastic laminated sheet complete all as specified and directed for the following:- Note ser item No 137 to 140- Proper colour coding shall be adopted for phase, neutral, earth and halves. 138 -Ditto- all as per item No 137 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. 139 -Ditto- all as per item No 137 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. 140 -Ditto- all as per item No 137 herein before but wiring with 4 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.Note ser item No 137 to 140- Proper colour coding shall be adopted for phase, neutral, earth and halves. 141 S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed 142 S & F switch socket combination 2 in 1,5A, flush type all as specified. 143 S & F switch socket combination 5 pin 16A, flush type all as specified 144 S&F of distribution board Triple pole and neutral with 200 Amps rated bus bar, for double door IP-42 DBs,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -415 volts suitable for housing MCBs and isolators complete in all fixing material/accessories etc complete all as specified and directed. 145 S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DBs, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -415 volts suitable for housing MCBs and isolators complete in all fixing material/accessories etc complete all as specified and directed. 146 S&F MCBs single pole 240 volts 6 to 32Amps 10 KA C curve series, all as specified and as directed by Engr-in-Charge. 147 S & F of MCB TPN, 415 volt, 63 Amp capacity, 10 KA, C curve all as specified and as directed by Engr-in-Charge 148 S & F of MCB SPN, 415 volt, 40 Amp capacity, 10 KA, C curve all as specified and as directed by Engr-in-Charge 149 M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings 150 S&F LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/polycarbonate, isolated body all as specified. 151 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified 152 Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body. 153 Submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sqmm nominal area and drawing into suitable size of cassing caping with one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wirecomplete all as specified and directed Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC conduit will be measured as one unit. 154 Submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sqmm nominal area and drawing into suitable size of cassing caping with one run of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wirecomplete all as specified and directed Note : Two runs of 10 Sqmm cable, one run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit. 155 M&L earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth Wire 4.0 mm (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1.3:6 type C1 chamber with RCC 12:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note The rate is iinclusive of necessary earth work, RFR and removal etc all as specified and as directed by Engineer-in-Charge. 156 S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified. 157 Supply and fix LED Bulb 9 Watt all as specified and directed by Engr-in-Charge. 158 S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50HZ, RPM 1200, Copper winding of sweep 300mm, with 2 years warrenty all as specified. 159 S&F electric water Heater, storage type steel body with copper inner tank and and heating element upto 1.5/2 KW capacity 25 liter, BEE 5 Star rated complete with all accesries such as safety valve, thermostate, NRV, connection piece etc all as specified. 160 S & F ceilling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current moter, with 5/3 year warrenty.all as specified & directed by Engr-in-Charge 161 S&F Decorative, wall mounting SS finish fixture with opal PC diffuser suitable for 40W incandescent candie lamp or 20 W spiral CFL all as specified and directed 162 Supply, Laying, jointing and testing LT underground 25 sqmm 4 core cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walis or laid under roads/ paths/ drains/ culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed. 163 -Ditto- as per item No 162 but 16 sqmm 4 core 164 -Ditto- as per item No 162 but 16 sqmm 2 core 165 Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-charge Note:-Punned thickness only shall be measured and paid. 166 Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well Per burnt sub class B laid in trenches flat complete all as specified and directed by Engineer-in-charge. 167 Supplying and fixing, light grade, Galvanised mild steel pipe/tubing 50mm bore, complete with all fittings, laid under roads, drain, paths, fixed to poles walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable proction of following sizes:-. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule 168 Supply, installing, testing and commissioning, factory made and tested (prototype having been CPRI type fest certified), LT Panel/Bus bar, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminium bus bars of Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, extemally powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring 2.5 Sqmm with PVC insulated, solid copper conductor, FRLS cables, IS-694 marked of adequate size incl the provision of space to accommodate the under mentioned items. The scope of work includes the following:- 169 (a) Aluminium bus bar cap 200 Amp-04 Nos(b) MCCB four pole with thermal magnetic release adjustable type with breaking capacity 16 KA,63 Amp-01 No(c) Digital Voltmeter-96 x 96 mm flush secure Panel mounting type 0-500V with selector switch - 01 No(d) Digital Amp meter 96 mm X 96 mm flush secure Panel mounting type 0-100 Amps with selector switch with CT-01 No(e) RYB neon indicating lamp set of three-01Notes: (1) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel (lii) Make of MCCB AS per AppxB (iv) Make of LT Panel/Bus Bar chamber:-AS per Appx B of the BoQ Danger notice board (02 Nos in Hindi and English of size 20cmx 15cm shall be fixed on the panel 170 M & L for Earthing complete with galvanised steel earth plate electrode of size 60x60cm×6mm thick surrounded by mixture of charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 metres deep below ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected to equipment by using Gl strips of size 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No.5 of MES schedule and connected to earthing test point all as specified and directed Including earth pit of size 30cm x 30cm x 45 cm made of PCC 1:3:6 and PCC 1:2:4 cover, funnel, Gl Tubing etc & testing on completion all as specified.Note: The unit rate Includes the cost of excavation & earth work in any type of soil, charcoal and salt in alternate layers, 20mm bore Gi Pipe (med grade) for watering 40mm Gl protection pipe (light grade) funnel, wire mesh, lugs, PCC 1:2:4 type 81 chamber in cement concrete 50mm thick precast RCC M-25 (design mix) cover duly reinforced with XPM (weight not less than 3kg/sqm) and Ci frame etc and including provision of test point, connecting to test point and testing on completion etc complete all as specified The unit rate also include earthing lead and protection pipe upto 7.5mtr from top of earth plate.
