Tender For Special Repair To Bldg No P-19 At Saa Under Ge (S) Tezpur.; 1 Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed 2 M&L Virified Ceramic tiles light shade8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough . 3 M&L coloured vitrifiedtiles 8-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 sqm in vertical surface in skirting etc set and jointed :in neat cemetn slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed 4 M&L Non - skid Ceramic, Colorised tiles 7 to 8 mm thick area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete incl screed bed or bedding layer of mortar 15mm thick in CM 1:6for laying floor finishescomplete all as specified and as directed. 5 S &F SRI tiles 300mm x300mm, 9-10mm thick, white colour laid over 15 mm thick bedding in cement mortar (1:4),joints grouted and flush pointed in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed. 6 M&L Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed 7 Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitionsetc complete all as specified and as directed 8 M&L 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 9 M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 10 M&L Non - skid Ceramic, steps stone tiles (any colour) single piece 10 to 12 mm thick including matching riser, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete incl screed bed or bedding layer of mortar 20mm thick in CM 1:6for laying floor finishescomplete all as specified and as directed. 11 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbishfrom the site etc complete all as specified and as directed 12 M&L for rendering 5mm thick on concrete surfaces of ceiling of chajja etcin cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed. 13 M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) provided at the junction of RCC and Brick work in plaster in internal surfaces shall be provided with stainless steel wire mesh (chicken mesh wire netting 25 gauge,) in plaster etc complete all as specified and as directed 14 M&L for rendering 20 mm thick in two layers of 10mm thick and 10mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction and polyester triangular fibres shall be uniformally mixed at the rate of 2% (or at the rate as per manufacturers instructions) by weight of cement all as specified and as directed Notes : WPC shall be measured and paid seperately 15 Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. 16 Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge. 17 Material and labour for (old size bricks)brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius,built in cement mortar ( 1:6) all as specified and directed. 18 Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) all as specified and directed. 19 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed. 20 M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded agg finishing even and smooth using extra cement as in plinth protections/path and laid fair in alternate bays & including filler joints with sealing compound grade A if required complete all as specifed and as directed. 21 M&L 40 mm thick Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate),as in subase of flooringetccomplete all as specifed and as directed. 22 M&L 25 mm thick Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate),as in subase of flooringetccomplete all as specifed and as directed. 23 Demolition of reinforced cement concrete in reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position 24 M&L pre cast RCC (1:2:4) type B1 using20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. 25 M&Lfor RCC type B11:2:4 (20 mm graded agg)as slab supported on wall , beams columns in floor, roofs landing and the like 26 M&Lfor RCC type B11:2:4 (20 mm graded agg)as Chajjas and the like 27 S&F mild steel TMT bar 8 to 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed 28 S&F mild steel TMT bar but 5mm dia and over upto and including 10mm dia in stirrups, spacersand binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed 29 Use & Waste of Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs,self, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) 30 Use & Waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges Rough finished surface of concrete flat 31 Use & Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Rough finished surface of concrete flat 32 M & L for providing plain cementconcrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. 33 M&L extra for forming fair finished drain or channel 30 cm and over inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. 34 M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed. 35 M&L for PCC 1:2:4 (using 12.5mm graded aggr) in roof Kerbs,rounded or chamfered or haunching in chajjas to prevent water seepage into brick walls,including necessory formwork and scafolding upto a height of 8mtr including demolition of existing PCC all as specified and directed. 36 M&L for rendering 10 mm thick on concrete surfaces in cement mortar 1:4 using water proofing compound @ 2% by wt of cement at all around and base of sunken floor with proper slope (WPC will be measured and paid separately). 37 i) M&L Cleaning top surface of floor slab and vertical surface of wall and brushing with neat cement slurry @ 0.5 kgs of cement per Sqm with acrylic based polymer modified cementitous composite at the rate of 0.25 kg/sqm and laying 50mm thick (average) PCC of grade M-10 (Nominal Mix), mixed with WPC as per manufacturer instruction laid in slope 1:20 towards spouts including covering corners. ii) rendering15 mm thick in cement mortar (1:4) on wal/floor surfaces of sunken floor finished even and smooth with using WPC as per manufacturing instruction and brushing with neat cement slurry @ 0.25 kgs of cement per Sqm with acrylic based polymer modified cementitous composite at the rate of 0.13 kg/sqm complete all as specified and directed.iii) Applying a coat of paving bitumen 80/100 penetration @ 1.50Kg/Sq.m on plastered & concrete surfacesiv) Laying a layer of 200 micron polythene film pasted with the help of suitableadhesive complete.v) Two nos 25mm bore GI medium grade 450mm long spout shall be providedthrough external wall to drain out accumulated water.NOTE: Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage/seepage exists. 38 M & L for cleaning the plastered /concrete surface with wire brush and applying water proofing treatment as under:-(a)Apply one coat of water based bituminious primer @ 0.20 Kg per Sqm.(b)Laying APP polimerised modified membrane weighing not less than 3.5Kg / sqm by torch application method. (thickness of membrane shall not be less than 3 mm).(c) The overlap for APP membrane shall be 75 mm on longitudinal direction and100 mm on transverse direction.(d) Finally applying a coat of solar reflective bituminious aluminium paint @0.15 Kg/Sqm over the membrane.rate quoted also include Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50m but not exceeding 100m as and where directed. 39 labour forDismantling water tanks and removing to store 500ltr nexc 1000ltr 40 Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. 41 Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. 42 M&L for factory made pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, x 0.63mm thickincluding one shop coat of red oxide zinc chrome primer complete all as specified and directed. 43 M&L for factory made pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete, of frame size 125 x 60 mm, x 0.63mm thick including one shop coat of red oxide zinc chrome primer complete all as specified and directed. 44 S&F for facrory made Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing 45 S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on both face, supplying & fixing in frame at site With Wood free EPS as per specification & drawing 46 S&Ffactory made 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated with both face is covered with decorative face veneer / laminated with sutaible addhenhive (0.9mm to1mm thick) with lipping/frame to match complete all as specified and as directed 47 S & fixed 2nd class hard wood 30 mm thick made glazed and skeleton shuttersopen rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed 48 S&F factory made 25mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated with both face is covered with decorative face veneer /laminated with sutaible addhenhive (0.9mm to1mm thick) with lipping/frame to match complete all as specified and as directed 49 M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete for Fe 410 (grade E-250 quality - B) 50 M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and as directed 51 S&F standard aluminium powder coated section Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified 52 S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller nylon ball bearingetc, complete complete all as specified NoteGlass and wire mesh shall be measured and paid separately under respectiveitems. 53 S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised. 54 S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws. 55 S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long. 56 S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy. 57 S&F (in repair) MS helical door spring 300 mm size incl roller and roller platefixed to wooden or steel frames with welding etc complete all as specified and directed. 58 S&F floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor, overall length cover plate 150mm complete all as specified and directed 59 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples 60 S&F 4 mm thick frosted/ pin headedglassin ventilatorshuttersall as specified and directed by Engr-in-Charge 61 S&F 5.5 mm thick sheet glass ordinary quality (any tint) and glazing with oil puttyin square not exc 0.50 sqm in each pane complete all as specified and directed. 62 S&F in repairs stainless steel derocative curtain rod of 25mm bore with wood fineshes including brackets 2 nos fiunnlel caps 2 Nos etc complete all as specified and directed 63 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and as directed 64 M&L Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 4 mm dia. G.I. (upto 1800mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long 65 M&L 4mm thick Nonasbestos fibre cement disigner building boardsfixed or laid/ inserted to timber/GI/Aluminium framework with screws 66 Dismantling wrought iron or mild steel work of anydescription, in any position complete all as specified and as directed 67 M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including necessary welding, febrication Fe-410W(GdeE-250) qualityB 68 Dismanting timber boarding of any description fixed in any position with nails 69 M&L second class hardwoodPlain, solid, straightchowkatsand frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints,suppliedandfixed 70 M&L 12 mm thickprelam Veneered decorative plywood/ laminated with sutaible addhenhive, grade 1 (with BWR resin) with decorative face veneers on boh face, fixed with screws to timber frame work(Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) including taking down old onecomplete all as specified. 71 M&L 19 mm thickprelam Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers/ laminated with sutaible addhenhive on both face, fixed with screws to timber frame work(Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) including taking down old onecomplete all as specified. 72 S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as directed by Engr-in-charge. 73 S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black all as specified. 74 S&F Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size all as specified. 75 S&F SS304 box type Cargo cutlery basket with width 436 mm, depth 500 mm and height 94mm fixed in kitchen cabinet complete all as specified. 76 S&F OrgaTray 570 - 500mm Depth, 900mm Width for 94 mm drawer side profile height set includes variable dividers for organising drawer in any way plastic silver, dividing elements, anthracite fixed in kitchen cabinet complete all as specified. 77 S&F CargoTech M Stainless Steel Wire Basket (Thali/Jar Basket) size 536 mm (W) x 500 mm (D) x 200 mm (H) ,Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified. 78 S&F CargoTech M Stainless Steel Wire Basket (Plain)size 436 mm (W) x 500 mm (D) x 150 mm (H),Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified. 79 S&F Stainless Steel, Chrome plated Bottle Pullout Carcase width 300 mm fixed both layers with acrylic plastic sheet makes it visually appealing and sturdyin kitchen cabinet complete all as specified. 80 Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store 81 Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store 82 Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store 83 Supply & fixingsteel tubes of size 15mm bore (medium grade) concealed type if required galvanised with all fittingsand fixed complete to wallall as specified & directed by Engineer-in-charge. 84 Supply & fixingsteel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallall as specified & directed by Engineer-in-charge. 85 Supply & fixingsteel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallall as specified & directed by Engineer-in-charge. 86 Supply and fix, as in repair, sinks with out drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 495mmX420mm and bowl size 410mmX330mmX160mm all as specified and directed. 87 Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed 88 Supply and fix, as in repair,vitreous china White Under Counter Wash Basin, 550 x 425 x 195 mm excluding taps, waste chain, plug and porcelain stopper but including cutting for and pinning and including bottle trap in ends complete all as specified and directed. 89 Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level dual flush,flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. 90 Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. 91 S&F 2 in 1 bib tap of 15mm bore cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and as directed. 92 S&F in repair15mm bore dia brass choromium platedwall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 93 S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed. Make:Jaguar, Marc or equivalent. 94 S&F in repairs center hole basin mixer without pop-up waste system complete all as specified and directed. Make- Cera, Prayag or equivalent. 95 S&F in repairs stop cock/angle cock 15mm bore, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed. 96 Supply and fix, as in repair, Overhead Shower 100 mm dia Round Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. 97 Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated)with 1 Meter Long Easy Flex Tube inChrome Finish & Wall Hook complete all as specified and as directed. 98 Supply and fix as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. 99 S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws. 100 S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 101 Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed. 102 Supply and fix, as in repairs, tempered glass corner shelf and wall mounted storage accessories with fitted brackets(10x10 inch) all as specified and directed. 103 S&F in repairbrass choromium platedtowel rail 600 mm long complete all as specified and directed. 104 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) 105 Dismantling of cast iron or reinforced concrete drain pipes op to 110mm bore, jointed in cement mortar and taking out of trenches, if required 106 Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed. 107 S&F PVC (SWR) 110mm dia bends any radius with access door all as specified and directed. 108 S&F PVC (SWR) branch 110mm bore pieces, single ( single Y ) equal or unequal with access door all as specified and directed. 109 S&F PVC (SWR) junction110mm bore single ( single t) equal or unequal with access door all as specified and directed. 110 Supply and fix, PVC cowls 110 mm bore all as specified and directed. 111 Supply and fix, in repairs 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls with access door all as specified and directed. 112 S&F PVC (SWR) 75 mm dia bends any radius with access door all as specified and directed. 113 S&F PVC (SWR) branch75 mm bore pieces, single ( single Y ) equal or unequal with access door all as specified and directed. 114 S&F PVC (SWR) junction75 mm bore single ( single t) equal or unequal with access door all as specified and directed. 115 S & F for 110 mm bore of pipe stack clamp out of 50mm x 5 mmflat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof. 116 All asabove but 75 mm bore pipe. 117 M&L for 75 mm dia of outlet PVC(SWR)floor trap, plain with grating including jointing with solvent cement all as specified and directed. 118 S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc 119 S &F SRI tiles 300mm x300mm, 9-10mm thick, white colour of make johnson/Orient bell / equivalent laid over 15 mm thick bedding in cement mortar (1:4),joints grouted and flush pointed in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed. 120 M&L preparation of newely plaster surfaces andappplying two coats of weather coat(Apex) over one primer coats of damp shieldtonew plastered walls by smart painting method complete all as specified and directed. 121 M&LApplying two coats of Oil bound distemper by smart painting method to newly plastered wall over a coat of primer over a thick layer of wall care puttyincluding preparation of newly platsered wallall as specefied and directed. 122 M&L for preparation of new plastered surfaces of ceiling and applying twocoats of oil bound distemper by smart painting method as in ceiling complete all as specified and directed. 123 M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth toold plastered walls as per manufacturer instrcution including properly fillings the cracksand apllied by approved applicatorcomplete all as specified and directed. 124 M&L complete removal of existing treatment and applying twocoats of oil bound distemper by smart painting method as in ceiling complete all as specified and directed. 125 M&LApplying two coats of Oil bound distemper by smart painting method to old wall over a coat of primer over a thick layer of wall care puttyincluding complete removal of existing treatment all as specified and directed. 126 M&L preparation of old painted steel surfaces over 10cm width or girthand applying one coatof synthetic enamel paint. 127 M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. 128 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 129 Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for creditand making good disturbed surfaces of walls, ceilings etc 130 Taking down main switches and DBs of any type and make including wooden board / junction box. 131 M & L for Point wiring for one Light/Fan/Bell point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed with and including modular metal flush box and Modular white Cover Plate with Frame for fixing switches, sockets, inculding one run of 1.5 sqmm FRLS PVC insulated unsheathed copper cableFRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch completeincluding making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required (as per the existing condition)all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. 132 All as per item No. 131here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable. 133 All as per item No. 131here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable 134 All as per item No. 131here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable 135 All as per item No. 131 here - in - before but for 5 Amps socket point on the same board controlled by one switch. 136 All as per Item No 131 above but for one light point controlled by two way switches 137 S&F modular switch flush type, 6 Amp, one way ,1 module all as directed specified. 138 S&F modular switch flush type, 6 Amp, two way ,1 module all as directed specified. 139 S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. 140 S&F modularswitch, 16 Amp flush type 1 module all as directed/ specified. 141 S&F modularsocket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified. 142 S&F in modularbell push, flush type, 5 Amp,2 module all as directed/ specified. 143 S&F modularFan Regulator stepped type 2 module ,120Wall as directed/ specified. 144 S&F call bell Dingdong type AC 230 Volts single pole. 145 S&Fceiling rose surface backelitethree terminals. 146 Supply and fix LED tube light fitting of 20 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. 147 All as item no 146 above but LED batten 9/10 watt 2 ft long 148 S & F Lamp holderinsulated body PVC/polycarbonatewith back plate and 9 W LED bulb suitable for batten fitting complete all as specified and directed 149 S & Fin repair 9 Watt LED bulb fitting, colour temp 6500k, including taking down old unserviceable type bulball as specified and directed by . 150 S & F in repair Bulk-Head light fixture, site selectable ,with10W LED including taking down old unserviceable fixtureall as specified and directed by . 151 S&F Floretine WL 1LS B22 SS PPCP decorative wall light fixture made out of polycarbonate, suitable with 9 watt LED Bulb complete all as specified and directed. 152 S&F Floretine WL 2LS B22 SS PPCP decorative wall light fixture made out of polycarbonate, suitable with 9 watt LED Bulb complete all as specified and directed. 153 S & F Energy saving and environmental friendly long life LED Bldg security light/street light 25 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device including GI bracket 1.2 mtr in length bent to shape of 120 degree with MS bracket 2 Nos, washers, nuts, bolts etc. 154 S & F in replacement 18 Watt LED fitting Recess/Surface mounted downlighter (Round/Square) with independent electronic LED driver ensuring glare free light with all its surface module accessories including taking down old unserviceable type downlighter including taking down unsv light fittings comlpete all as specified and directed. 155 Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl bladesrefixing the fan in same position including all electrical connection and material and labour for replacement oftwo nos split pins, one connection block and one rubber seal all as specified and as directed. 156 Material and labour for painting of ceiling fans complete of any sweep/make with one coat of firstquality synthetic enamell paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavaties with filler materials,and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) completeall as specified and as directed. 157 S & F for VTPN DB, 415V double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wallshall be made good to match the existing wall finishes complete all as specified and directed. 158 S & F of TPN DB, 415V double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wallshall be made good to match the existing wall finishes complete all as specified and directed. 159 S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed 160 S & F MCCB, 415VTriple pole and nutral 100 Amps, breaking capacity 16KA complete all as specified and directed 161 S & F MCB B series Triple pole and nutral 63 Amps, breaking capacity 10KA complete all as specified and directed 162 S & F MCB B series Single pole and nutral 6-32 Amps, breaking capacity 10KA,complete all as specified and directed 163 S & F MCB B series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed 164 S&F in replacemetal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified. 165 S & F in repair motor starter single phase for AC of any make, any model and any capacity all as directed/ specified. . 166 M&L in repair for sub main wiring withtwo run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt,and two run of copper earth wire 6 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. 167 Ditto as item No-166but 2 x 4 sqmm + 1 x 4 sqmm earth wire 168 M&L complete for PVC exhaust fan of size 250 mm sweep, single phase,230volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements. 169 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, not more than 50Watt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook all as directed 170 Supply and fix electric water heater, storage type, heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, stainless steel connection pipes(hot & cold) etc. complete all as directed 171 Supply and fix of Kitchen Chimney Faber 90cm, 1500 cum/hr Auto-Clean curved glass kitchen Chimney including necessary fitting accessary and cutting/hole in roof/wall suitable sizecomplete all as specified and directed. 172 Supply and fixing Wall mounting fan 300 mm sweep. 173 Supply and fixing of LED decorative garden post top lantern cap 15 watts with opal acryliwith IP 65 protection warm white Cylindrical LED bollard rings contemporary style and unique design toghter for indirect glare- free lighting. including making all connection using 3 core copper flexible cable drawn through in PVC conduit (if required) complete all as specified and directed by Engr-in-Charge. 174 M&L in replacement for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I 175 S&F in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq mm 3.5 core 176 Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, etc. complete all as specified and as directed. 177 Returning, fillingincluding spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soilcomplete all as specified and as directed. 178 Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.. 179 M&L forsand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :-Punned thickness of sand layer shall be measured abd paid to contractor. 180 M&L in repair for Brick Sub Class B locally available best qualitylaid in trenches with width equal to length of the bricks, above sand cushioning for cable protection completeall as specified and as directed. 181 Taking up GI water tubing 40 mm bore from trenches / floor / poles including all fittings, segregated and stacking the pipe complete all as directed. 182 Supply, lay and fix 40 mm bore galvanized iron water tubing Medium grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. 183 Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I 184 Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 500 ltrs all as specified in SSR Part I 185 Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms) 186 Taking up GI water tubing 20/25 mm bore from trenches / floor including all fittings, segregated and stacking the pipe complete all as directed. 187 Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. 188 Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. 189 Supply and fix in repairs Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed 190 Supply and fix in repairs Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed 191 Supply and fix Bib taps 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed 192 Supply and fix Stop valves 15 mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 193 Supply and fix in repairs Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 20 m m - 2 1 0 g m s) 194 S & F GI pipe 15mm bore fixing on wall with clamp andall acessories for water heater complete all as directed. 195 NOTES:1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2.The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule A notes for details.
