Tender For Special Repair To Bldg No Rb-67 At Mcte Under Ge (Mcte) Mhow; 1 B/R WORKS 2 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified. 3 M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified. 4 All as per item No.3 but on verticalsurfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified. 5 M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified . 6 M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tilescomplete all as specified. 7 Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land., complete all as specified. 8 M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6, complete all as specified. 9 M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6, complete all as specified. 10 All as per item No.9 above item no.8 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. 11 M&L for mirror poishing of old kota stonecomplete all as specified. 12 M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified. 13 Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each, complete all as specified. 14 Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified. 15 Taking down Shutters of any descriptionexc. 1 sqm but n. exc 2 sqm each of any description complete all as specified. 16 S&F Pressed steel door frame for single door, size 105mm x 60mm x 1.25mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., complete all as specified. 17 S&F Pressed steel door frame for single door, size 125mm x 60mm x 1.25mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc., complete all as specified. 18 M & L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed. complete all as specified . 19 S&F 35mm thick factory made door Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. 20 M&L for 30mm thick factory made door shutters made out of 2nd Class Hard Wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/ gauze complete all as specified. 21 S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drawing complete all as specified.. 22 S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified. 23 M&L for Preparing surface of wood and wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint. complete all as specified. 24 All as per item No.23 above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sqm each. complete all as specified. 25 S&F mild steel hold fasts, plain angle cleats for securing purlins and similar small articles conforming to Fe 290 gde E 165 complete all as specified. 26 S&F galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 27 S&F 150mm size aluminium, anodised barrel tower bolt of extruded section. complete all as specified. 28 S&F 125mm size aluminium, anodised barrel tower bolt of extruded section. complete all as specified. 29 S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified. 30 S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified. 31 S&F 150mm size extruded aluminium alloy handles, fabricated type. complete all as specified. 32 S&F 100mm size extruded aluminium alloy handles, fabricated type. complete all as specified. 33 S & F door stopper of aluminium alloy body and tongue 150mm long, anodised fixed in door with screws etc complete all as specified. 34 S&F in repairs 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. 35 M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 36 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified. 37 S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end andfixed to wall incl. removal of existing rod and making good etc complete all as specified. 38 Hacking out old broken glass (any tickness, size, quality or description) from wooden/ steel framesglazed with oil putty or fixed with beads complete all as specified. 39 S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified. 40 S&F for 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane. complete all as specified. 41 S&F (in repairs) Galvanised steel wire cloth, 0.56mm nominal dia. of wire and average width of aperture 1.4mm and fixed with tinned tacks, or galvanised wire staples and fixing retrieved wooden beads including removing old unserviceable wire cloth complete all as specified. 42 S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. 43 S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl bracketsand flushing pipe fixed in repairs complete all as specified. 44 S & F vitreous china squatting pan `Orissa` pattern, size 580 x 440mm white in repairswith integral foot rests (Excluding flushing cistern and flush pipe), complete all as specified and directed. 45 S&F in repairs vitreous china, white, wash hand basin, with pedestal flat back size 550 x 400mm including MS brackets including cutting for and pinning in,including waste pipe complete all as specified and directed. 46 S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified. 47 S&F Grating 100mm dia of CP with or without hole complete all as specified. 48 S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified. 49 S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified. 50 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittingsand wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified. 51 S&F in repair 15mm dia brass chromium plated swan neck pillar tap, fancy type with or without lettered Hot or Cold, with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipecomplete all as specified. 52 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified. 53 Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specified. 54 S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specified. 55 Refixing only old 15mm GI tubing and connection in new or old position (wall, floor, wall etc) complete all as specified. 56 M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed. 57 Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed 58 S&F, laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specified. 59 Refixing only old 20mm GI tubing and connection in new or old position (wall, floor, wall etc) complete all as specified. 60 Dismantling PVC water tanks 500 litres capacity. complete all as specified incl. removing off the premises. 61 S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. complete all as specified. 62 S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified. 63 S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand &over head Shower screwd down for 15mm GI bore pipe complete all as specified. 64 S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified. 65 S & F in repairs 32/ 40mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets complete all as specified. 66 S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality, complete all as specified. 67 S&F Brass Bottle Trap 300mm (12) Designer wall connection pipes and wall flange complete all as specified. 68 Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified. 69 M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturers instruction, finished fair and even without using extra cement complete all as specified and directed. 70 M & L for prepration of new wall surfaces & applying birla/ J. K. wall care white putty 2mm thick for levelling the surfaces and applying two coat of interior emulsiondistemper over a coat of wall primer incl. preparation of surfaces of walls complete all as specified. 71 M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified. 72 M&L for Preparation of newly plastered surface and applying three coats of white wash on Ceiling complete all as specified. 73 M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified. 74 M & L for Prepration of new surfaces and applying two coats exterior weather coatover one coat of exterior primer over and including 2mm thick wall putty etc complete all as specified. 75 M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, and applying Birla/ J. K. wall care white putty 2mm thick for levelling the surfaces including properly making of V shape cracks and filling of all cracks with cracks seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primercomplete all as specified. 76 M&L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla/ J. K. wall care white putty 2mm thick for levelling the surfaces including properly making of V shape cracks and filling of all cracks with cracks seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified. 77 M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified. 78 M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface. complete all as specified. 79 M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface. complete all as specified . 80 S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape complete all as specified. 81 S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 kg/ cum manufactured by ISO 9001-2015 Certified Company, using solvent cement complete all as specified. 82 S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed, complete all as specified. 83 S&F 40mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed. complete all as specified. 84 S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified. 85 S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specified. 86 S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. 87 S&F in repairPVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed. 88 S&F in repair 110mm bore PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified. 89 Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified. 90 S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified. 91 S&F in repairs PVC floor trap, with grating75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) in repairs and including waterleak proor treatment complete all as specified. 92 S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified. 93 S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified. 94 S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as specified. 95 S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as spcified. 96 S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip 1mm, fixed on wall complete all as specified. 97 Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified. 98 M&L for broken stone or bounders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface complete all as specified. 99 M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified. 100 M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified. 101 M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thickfinished surface rough to receive tiliing complete all as specified. 102 Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m all as directed by the Engineer-in-charge. 103 M &L for Brickwork with subclass Bbricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6complete all as specified and directed. 104 M &L for Brickwork with subclass Bbricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified. 105 M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade laid dry in floor/ path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified. 106 Dismantling Plain or Corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern Roof covering complete all as specified. 107 Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified. 108 S&F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. complete all as specified. 109 M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate complete all as specified. 110 S&F powder coated aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh including removing old steel ventilators including finishing the demolished surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings accessories complete all as specified. 111 S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces.(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter -01 No.(vii)Two nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No pershutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall – 06 No per window. 112 S&F5.5mm to 6.5 thick looking mirror, of selected quality glass fitted to wall with brackets complete all as specified. 113 Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified. 114 Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres complete all as specified. 115 M&L for 10mm thick screed bed on concrete surfaces in CM (1:3) finished even and smooth without using extra cement complete all as specified. 116 M&L for PCC 40mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/ 50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/ 50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/chhaja and roof kerbs/ benching complete all as specified. 117 M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items including 10 year guarantee & testing for water tightness :-(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting. (ii)Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.(iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and lapsas per manufacture instruction etc.Applyingone coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. 118 M&L for applying aluminium paint in two coat @ 100 gm/ sqm in each coat on finished membrane surfaces, complete all as specified. 119 M&L for plain cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed with neat cement slurry on roof and cut and polished over and including 15mm thick screed bedding in Cement mortar (1:4), complete all as specified. 120 Treatement for sunken portion is as followsincluding 10 year guarantee & testing for water tightness :- (i)Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii)Provide PCC 1 : 1.5 : 3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor, finish the surface even & smooth without using extra cement (iii)M&L for water proofing plaster for sunken portion in CM 1:3, 20mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (WPC Make Dr fixit)(iv)M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/ Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces.Note :- above includes (a)Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b)The sunken portion shall be tested for leakage/ seepage/ dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage/ seepage/ dampness is eliminated. (c)Horizontal flat area to be measured. 121 E/M WORKS 122 Taking down carefully copper/ aluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing materials to store for taking credit and making good disturbed surfaces complete all as specified. 123 Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors complete all as specified 124 Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No III Mhow complete all as specified. 125 Taking down existing Gyesers 25 ltr in position and re-fixing the same after B/R work including removing of defective parts with new parts and painting of the same with synthetic enamel paint by spraying including overhaulling filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from Metal clad/ power socket to Gyser and unserviceable geyser deposit to MES store yard of AGE E/M-III complete all as specified 126 Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and refixing the same carefully on the wooden board of suitable size after compltion of B&R Work complete all as specified 127 Taking down carefully MCB DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors complete all as specified 128 Taking down carefully light fitting any type or taken in schedule of credit as directed at site complete all as specified 129 Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings,common earth and connected to earth dolly including modular metal flush box, cover plate and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the 130 (a)One light/ fan/ bell controlled by one, one way switch 5/6 Amps 131 (b)One light/ fan/ bell controlled by one, two way switch 5/6 Amps 132 (c) One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch 133 (d)One 3 pin, 5/6 Amps socket outlet point on SAME BOARD controlled by one, one way 5/6 Amps switch 134 Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cablein and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked completeincluding one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular metal flush box, cover plate and cover frame of suitable size incltaking down carefully copper/ alluminium powerpoint wiringswitches, sockets and making good disturbed surface of walls and floors etc. complete all as specified and directed. 135 All as per item No.134 here in before butusing 4.0 Sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/ AC point connecting to metal plug and socket DB incl necessary running of4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point) 136 S & F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V, complete all as specified 137 S & F modular switch 1 way 6 A, 1 modulecomplete all as specified 138 S & F for Modular Switch single pole, two way, and 5/6 Amp single module complete all as specified 139 S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified 140 S & F switch modular type 16 A, 1 module complete all as specified 141 S & F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. 142 S & F bell push flush type , 5 Amp complete all as specified and directed 143 S&F lamp holder insulated body with back plate for batten fittings complete all as specified 144 S & F Buzzer Ding Dong AC 230 Volts Single pole, complete all as specified 145 Supply and fixing 20W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified. 146 S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 01 years from date of installation and necessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulbcomplete all as specified. 147 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, complete all as specified 148 Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified. 149 S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22base and including fixingof LED bulb 10 watts complete all as specified. 150 Supply and fix LED bulb of 7 watt, Of base B-22, 6500 K suitable for fixing in lamp holder complete all as specified. 151 S&F MCCB/MCB VTPN DB 4 way (F1+12) double door with 200 Amps rated bus bar, 430 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wallcomplete all as specified 152 S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. complete all as specified and directed 153 Supply and fixing Amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified. 154 Supply and fixing 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as specified. 155 S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for63 Amps rating, 16 KA breaking capacity complete all as specified 156 S&F (in replacement) of ceiling fans complete with blades, down rods, electronic regulator and remote with battery and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value not less than 8.46 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified. 157 S & F for energy efficient exhaust fan havey duty of 300mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paintcompelte all as specified and directed.Note:- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). 158 Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250 mm sweep with louver, white in colour includingcutting of wall for suitable opening and duly connection with copper wire from ceiling rose etc complete all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces. 159 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store ccomplete all as specified 160 M & L for sub main wiring with 02 runs of 6 Sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same all as specified and directed.Note:- Two runs of maincopper conductor, one run of earth wire of same size and one run of PVC conduit shall be measured as one unit length. 161 All as per item No.160 here in above but with 2 runs of 4 sqmm main wire along with 01 runs of 4 sqmm earth wire. 162 All as per item No.160 here in above but with 2 runs of 2.5 sqmm main wire along with 01 runs of 2.5 sqmm earth wire. 163 M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed. 164 M& L for replacement of Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified. 165 Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed, including taking down existing old unserviceble LT UG/ service/ unseviceble cable of any descrition and size completion all as specified. 166 Supply laying and jointing GI pipe light grade 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings completion all as specified. 167 Excavation in trenches not exc. 1.5mwide and not exc 1.5m deep in hard/dense soil and getting out completion all as specified. 168 Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. 169 Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point completion all as specified. 170 M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cablecompletion all as specified.(Note : Punned thickness of sand shall be measured) 171 M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection completion all as specified.
