Tender For Spl Repair Of 21 Units Of Staff Qtrs Located In Block No. P-1, P-2, P-3, P-6, P-7 And P-8 Of Kendriya Vidyalaya No. 04 Under Ge(North) Bathinda At Bathinda Mil Stn; 1 Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified anddirected by Engineer-in-charge. 2 Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and directed by Engineer-in-charge. 3 Supplying and laying of 20mm CPVC Pipes SDR11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors including all fittings complete all as specified and directed by Engineer-in-charge. 4 Supplying and laying of 25mm CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors including all fittings complete all as specified and directed by Engineer-in-charge. 5 Supply and fixing in replacement ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and directed by Engineer-in-charge. 6 Supply and Fixinginreplacement 20 mm bore Gun metal globe or Gate valve with iron wheel head , screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in- charge. 7 Supply and fixing in replacementStop valve/ Angle valvefor 15 mm boreof pipe , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed by Engineer-in-charge. 8 Supply and fixing in replacement swivel shower for PTMT with shower arm 195mm long with bend of 45 degree 15mm dia (minimum weight 80 gms) complete all as specified and directed by Engineer-in-charge. 9 Supply & fixingin replacement PVC connection 15mm sizewith PTMT nuts450 mm long complete all as specified & directed by Engineer-in-charge. 10 Supply & fixing in replacement Rotational mouldedpolyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connectioncomplete all as specified and as directed by Engineer-in-charge. 11 Supply & fixing in replacement , 15mm bore Bib tap cast copper alloy, chromium plated, fancy type long body with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified & directed by Engineer-in-charge. 12 Supply & fixing in replacement wall mixer with bend pipe upper side for overhead shower with 115mm long bend pipe, connecting legs and wall flange (with or without hand and overhead shower) complete all as specified & directed by Engineer-in-charge. 13 Supply & fixing in replacement, stop valvecast copper alloy,chromium plated, fancy type, long shank and and cup (concealed type), screwed both ends suitable for15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. 14 Supply and fixingin replacementVitreous china wash hand basin, white, flat back, of size 550 x 400 mm including cast iron cartilever bracket ,32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed . 15 Supply and fixng in replacement bottle trap 32mm bore of PTMT having min. water seal of 25mm (min. weight 32mm-260gms) complete all as specifiedand as directed by Engineer-in- charge. 16 Supply and fixng in repair LDPE (Low density polyethylene)32 mm bore pipes, ISI marked, confirming to IS, pressure rating @ 6 Kg/Sqcm, in any length , fixed to walls , ceiling with and including MS clamps or in floors including all fittings, heads, shoes, bends, swan necks, etc. 17 Supply only32mm dia,waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed. 18 Supply and Fixing inreplacement brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long betweenflanges complete all as specified and as directed by Engineer-in- charge. 19 Supply and Fixing inreplacement PTMT mirror cabinet of size 380mm x 450mm complete all as specified and as directed by Engineer-in- charge. 20 Supply & fixing in replacementWHB Singlelever Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for iron pipe 15mm borecomplete all as specified and as directed by Engineer-in-charge. 21 Supply & fixingin replacement25mm dia drapery rod cromium Plated with single bracket including wall and other side fancy knobs as specified and as directed by Engineer-in-charge 22 Supply and fixing in replacement health faucet with 1.00 mtr long SS pipe and clamp hook including accessories complete all as specified and directed by Engr In Charge 23 Supply and fixing in replacementstainless steel, Chromium plated, decorative type, soap dish holder of approximate size 160mm x 160mmx 90 mm fixed to wall with rubber plugs complete all as specified and as directed by Engineer-in-Charge. 24 Supply and fixing in replacement Toilet paper holder of Brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engineer-in-Charge. 25 Supply & fixing in replacement 5.5mm thick sheet glass Shelf 12cm wide with chromium guard 60cm long complete all as specified & directed by Engineer-in- charge. 26 Supply & fixing in repairs vitreous china wash down water closet pan (pedestal pattern, EWC) white clour including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white or black colour) closed pattern with flat bottom complete all as specified and as directed by Engineer-in- charge. 27 Supply & fixing in replacementchromium plated round / square grating with or without hole of best quality of size 100mm complete all as specified and as directed by Engineer-in- charge. 28 Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steelventilators(without taking off shutters from the frames)not exceeding 1.50 sqm eachcomplete all as specified and asdirected by Engineer-in- charge. 29 Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steelventilators(without taking off shutters from the frames)areaexceeding 1.50 sqm but not exceeding 4 Sqm eachcomplete all as specified and asdirected by Engineer-in- charge. 30 Taking down shutters only of any description area not exceeding 1.0 sqm eachcomplete all as specified and as directed by Engineer-in- charge. 31 Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed by Engineer-in- charge. 32 Supply and fixing Pressed steel frames for doors with one or more rebates with and includinglock strike plate, fixing lugs etc. size of frame 125mm x 60mm,with and including one shop coat of zinc chromate primercomplete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account. 33 Supply and fixing Pressed steel frames for doors with one or more rebates with and includinglock strike plate, fixing lugs etc., size of frame 105mm x 60mm,with and including one shop coat of zinc chromate primercomplete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account. 34 Material and Labour for PCC (1:3:6) type C-1 using 20 mm gradedstone aggregate as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge. 35 Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge.Note:- Wire gauze/ glass shall be measured and paid separately.Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ. 36 Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard woodwith lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhatcomplete all as specified and as directed by Engineer-in- charge. Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ. 37 Supply & fixing for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and complete all as specified and as directed by Engineer-in- charge. 38 Supply and fixingSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed by Engineer-in-Charge. 39 Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm longcomplete all as specified & directed by Engineer-in-charge. 40 Supply & fixing250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed by Engineer-in- charge. 41 Supply & fixingAluminum anodisedhandle cast type 125 mm long complete all as specified and as directed by Engineer-in- charge. 42 Supply & fixing300mmmild steel ordinary rat tail rodsprings (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge. 43 Supply & fixing in replacements floor door stoper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in- charge. 44 Material and Labourin replacements 18/19mm thickPrelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed by Engineer-in- charge. 45 Supply and fixing in repair 18/19mm thick block board grade 2 quility interior grade commercial typecomplete all as specified and as directed by Engineer-in- charge. 46 Material and Labour for Decorative laminate type 1, 0.9mm thickof surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructionscomplete all as specified and as directed by Engineer-in- charge. 47 Material and Labour for Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of 2nd class soft wood 3.0sqcm exceeding and not exceeding6.0 sqcm complete all as specified and as directed by Engineer-in- charge. 48 Supply & fixingcontinuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30mm complete all as specified and as directed by Engineer-in- charge. 49 Supply & fixing mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and as directed by Engineer-in- charge. 50 Supply and fixingmild steel drawer pulls, 3 screw plate with fixed dished pull 80mm to 100mm long complete all as specified and as directed by Engineer-in- charge. 51 supply and fixing Hasp and staple, 100mm mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in- charge. 52 Supply and fixing mortice lock vertical type brass made 2 levers 100mm complete all as specified and as directed by Engineer-in- charge. 53 Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staplescomplete all as specified & directed by Engineer-in- charge. 54 Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground levelcomplete all as specified and as directed by Engineer-in-Charge 55 Material and Labour cement concrete for 75 mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregateas in plinth protection, complete all as specified and directed by the Engineer-in-Charge. 56 Demolition ofcement Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed by the Engineer-in-Charge. 57 Material and Labour for 30 mm thick PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate using Integral water proofing compound as in sunkeen floor(Integral water proofing compoundshall be measured and paid separately) complete all as specified and directed by the Engineer-in-Charge. 58 Material and Labour Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed by the Engineer-in-Charge. 59 Material and Labour Polythene film, 150 micron thick, laid over with and including a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed by the Engineer-in-Charge.Note: The rate of a coat of bitumen primer @ 0.30 to 0.50 kg per sq. m is included in this item and nothing shall be paid extra on this account. 60 Material and labour for rendering / screed 15 mm thick in Cement Mortar 1:4 on fair faces of brick work or cement concrete surfaces as in sunken portion using Integral water proofing compound as per manufacturers instructionsincluding finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :-Integralwater proofing compound shall be measured and paid separately. 61 Supply only Integral water proofing compound 62 Material and labour PCC 1:7:12 type F2 using 40mm graded stone aggregatesas in sub base of floor mass filling complete all as specified and as directed by the Engineer-in-Charge. 63 Material and Labour for Roughening surfaces of existing concrete surfaces of roofby picking , sweeping , clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-charge. Note: The rate of neat cement slurry @ 3.0 Kg of cement per Sqm is included in this item and nothing shall be paid extra on this account. 64 Dismantling ofstone slabs of any description or thickness in floors, aprons etc. laid bedded and pointedin any mortar complete all as specified and as directed by Engineer-in-charge. 65 Material and Labour forDouble charge Vitrified ceramic tiles ,stain free,havingsizenot less than 595mm x 595mm and8 mm thick ,Premium (1st quality)straight edge, colour as approved by GE ,in floors , set and jointed in neat cement slurryand pointed inexpoxy grout to match the colourof tiles, laid over and including20 mm thick Screed bed or bedding layer in Cement Mortar 1:4complete all as specified and as directed by Engineer-in- charge. 66 Material and Labour forDouble charge Vitrified ceramic tiles ,stain free,havingsizenot less than 595mm x 100mm and8 mm thick ,Premium (1st quality)straight edge, colour as approved by GE ,as in vertical surfaces such as skirting , set and jointed in neat cement slurryand pointed inexpoxy grout to match the colourof tiles, laid over and including10 mm thick renderingin Cement Mortar 1:4complete all as specified and as directed by Engineer-in- charge. 67 Material and labour for Glazed ceramic coloured tiles,Premium (1st quality)straight edge, colour as approved by GE ,of size 350mm x 250mm / 450mm x 350mm /450mm x 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurryand pointed in colored polymer based grout to match the colourof tiles, laid over and including 10 mm thickrenderingin cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. 68 Material and Labour forNon skidceramic tiles ,havingsizenot less than 395mm x 395mm and7mm to 8 mm thick ,Premium (1st quality)straight edge, colour as approved by GE ,in floors , set and jointed in neat cement slurryand pointed in coloured polymer based grout to match the colourof tiles, laid over and including20 mm thick Screed bed or bedding layer in Cement Mortar 1:4complete all as specified and as directed by Engineer-in- charge. 69 Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partitionand like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement(1:2)using marble dust with admiture of pigmentto matchwith shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.Note: Single Piece shall be used in the work and shall beapproved by GE before incorportation . 70 Taking down cement plaster of any description on brick or concrete surfaces, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in- charge. 71 Material and Labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge. 72 Material and Labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge. 73 Material and Labour for rendering 5mm thick in cement mortar 1:4 on concrete surfaces as in ceiling and finishing thesurface even & smoothcomplete all as specified and as directed by Engineer-in- charge. 74 Material and labour for preparation of new plastered surfaces of wallsand applying two coats of oil bounddistemper over a coat ofalkali resistant priming paintcomplete all as specified and as directed by Engineer-in-charge. 75 Material and labour for preparation of oldsurfaces of wallsand applying two coats of oil bounddistemper complete all as specified and as directed by Engineer-in-charge. 76 Material and Labour forpreparation ofnew wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying with two coats of synthetic enamel paint over with and includinga coat of pink primer complete all as specified and as directed by Engineer-in-charge. 77 Material and Labourpreparation of steel surfaces andapplying two coats of synthetic enamel paint of any description not otherwise described over 10 cm width or girth and complete all as specified and as directed by Engineer-in-charge. 78 Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge. 79 Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paintof approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge. 80 Dismantling brick tiles / PCC terracing tiles single layer laid on roofand pointed with cement mortarcomplete all as specified and as directed by Engineer-in-charge. 81 Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing/cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) up todistance not exceeding 100 metres from the site complete all as specified and as directed by Engineer-in-Charge. 82 Material and Labour for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered complete all as specified and as directed by Engineer-in-Charge. 83 Material and Labour forAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and as directed by Engineer-in-Charge. 84 Material and labour for lime concrete terracing using brick aggregate and surkhi as specified in clause 11.11 and laying as specified in clause 11.27 of MES Sch Part-I (2009) minimum thickness at edge 40mm and increasing uniformly towards ridges to obtain a chain slope 1:40, the top shall be trowelled with the addition of jaggery solution and finished smooth complete all as specified and as directed by Engineer-in-charge. 85 Material and labour for 40mm thick brick tiles laid / bedded overwith and incuding15mm thick screed bedin cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cementcomplete all as specified and directed by Engineer-in- Charge. 86 All as per serial item No. 85.00 here-in-before but except brick tiles.(old serviceable brick tiles shallbe obtained from serial item no. 80.00 here-in-before of BoQ andreused after proper cleaning & washing complete all as specified and directed by Engineer-in-Charge . Note : The rate of cleaning and washing of retrived tiles is included in this item and nothing shall be paid extra on this account. 87 Material and Labour for Cement Concrete 1 : 2 : 4Type B-1 , using 20 mm graded stone aggregates asin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and as directed by Engineer-in- charge. 88 Material and labour for preparation of new plastered surfaces of wallsand applying two coats of cement base paint over a coat ofchalk whiting, on plastered surfaces complete all as specified and as directed by Engineer-in-charge. 89 Material and labour for preparation of old plastered surfaces of wallsand applying two coats of cement base paintcomplete all as specified and as directed by Engineer-in-charge. 90 Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preparation ofsurfaces, complete all as specified and as directed by Engineer-in-charge. 91 Material and Labourfor preparingold plastered or unplastered surface on ceiling and applying one coat of white wash complete all as specified and as directed by Engineer-in-charge. 92 Supply and fixing in replacement sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and as directed by Engineer-in-charge. 93 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,complete all as specified and as directed by Engineer-in- charge. 94 Material & Labourfor 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears,laid in trenches and jointing with cement mortar/lead joint as speicified and directed,including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge. Note: Excavation and earth work shall be measure and paid seperately. 95 Material & Labourfor 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears,fixed to wall and jointing with cement mortar/lead joint as speicified and directed,including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge. 96 Supply & fixing 100mm bore cast iron Bends (any radius) with ducks foot or heel rest with oval access door fixed with cement mortar/lead joint as speicified and directed, joints complete all as specified and as directed by Engineer-in- charge. 97 Material & Labourfor 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears,fixed to wall and jointing with cement mortar/lead joint as speicified and directed, complete all as specified and as directed by Engineer-in- charge. 98 Supply & fixing 75mm bore Bends (any radius), diminishing pieces or tapers (larger boremeasured) complete all as specified and as directed by Engineer-in- charge. 99 Supply & fixing 75mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge. 100 Material & Labour for 75 mm diacast iron floor trap with CP grating including fixed in cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregatecomplete all as specified and directed by Engineer-in-Charge. 101 Supply and fixing 150mm x 150mm size salt glazed stone ware gully traps, square or round mouthed, type P complete all as specified and as directed by Engineer-in- charge. 102 Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along wallsincluding nut bolt and PCC work, complete all as specified and as directed by Engineer-in- charge. 103 Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge. 104 Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge. 105 Material and Labour Brick work with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge. 106 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in- charge. 107 Demolition of cement concrete reinforced of any discription and in any position,including reinforcement cut as required to facilitatecomplete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. 108 Supply and Fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) andhanging; also fastening and fixing complete complete all as specified and directed by Engineer-in -charge. 109 Material and Labour precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as Kitchen, Platfrom slabs of any thickness size or shape including necessary moulds/ form work etc set and jointed in cement mortor CM (1:4) complete all as specified and as directed by Engineer-in- charge. 110 Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etccomplete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) 111 Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges onrough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge. 112 Supply & fixing factory made steel window confirming to IS 1038 with side hung shutters including Box type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with and including one shop coat of zinc chromate primer without glazing barscomplete all as specified & as directed by Engineer-in- charge.Note: The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account. 113 Supply & fixing factory made steel window confirming to IS 1038 with side hung shutters including Box type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with and including one shop coat of zinc chromate primer with glazing barscomplete all as specified & as directed by Engineer-in- charge.Note: The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account. 114 Supply & fixing 4 mm thick,sheet glass ordinary quality and glazing with oil puttyin square not exceeding 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge. 115 Supply & fixing 4 mm thick,sheet glass ordinary quality and glazing with oil puttyin squareexceeding 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge. 116 Supply & fixing 4 mm thick Figured glass pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed 117 Material and labour Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micronfor doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including 100mm long aluminium handle , roller , sliding plate and saftey lockwith necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required with andincluding aluminiumcleat angle, Aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .Note :- (i) Weight of aluminium sections , aluminiumcleat angles & Aluminium snap beading shall be physically ascertained through a board of officers convened by GEand payment shall be made only after ascertaining the actual weightof aluminium at site.(ii) The rate of material and labour for providing the 100mm long aluminium handle , roller , sliding plate and saftey lock ,EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws is included in this item and nothing shall be paid extra on this account.(iii)During considering the weighing of aluminium sections , aluminiumcleat angle & Aluminium snap beading, the weight of 100mm long aluminium handle , roller , sliding plate and saftey lock,EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screwsshall not be considered formeasurments and payments. onlythe weightof the aluminium sections ,aluminiumcleat angles & Aluminium snap beading shall be considered andmeasurment and payment shall be made accourdingly.(iv) During the weighing of aluminium sections , aluminiumcleat angle & Aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account..(v) Glazing /Panelingand wire mesh shall be measured and paid seperately. 118 Supply and fixing in replacement 10 litres capacityPVCvalveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handleincluding brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge. 119 Supply & fixingin replacements vitreous China squatting pan, Orissa pattern, size 580mm x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and as directed by Engineer-in- charge. 120 Supply & fixing Stack clamps for 100mm dia pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by Engineer-in- charge. 121 Excavating in trenches, not exceeding 1.5 m wide and not exceeding1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, sewage pipe line , water supply pipes ,cables etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge. 122 Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and as directed by Engineer-in-charge. 123 Removing surplus excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-charge. 124 Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe set in cement mortarof150 mm bore pipes all as specified and directed by Engineer-in-Charge. 125 Supply and fixing Salt-glazed stoneware drain pipes 150mm bore (internal) of grade Alaid in trenches and jointed etc. complete all as specified and as directed by Engineer-in-charge. Note: Excavation and earth work shall be measured and paid seperately under respective items of Schedule A BoQ. 126 Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of SGSW drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-charge. Note :-(i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm. 127 Material and Labour forCutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l using 20mm stone aggregates smooth finished, and reforming benching as required forInternal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge. 128 Supply and fixingStainless steel plate rack of size 0.75m x 0.60m and thickness of Stainless Steel strip of 1mm fixed on wall etc. complete all as specified and as directed by Engineer-in-charge. 129 Supply & fixing magnetic catcher of best quality approved by GE as in cupboards etc. to catch & support shutterscomplete all as specified and as directed by Engineer-in- charge. 130 Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed by Engineer-in-Charge. 131 Material and labour for 75 mm thickcement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. 132 Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engineer-in-Charge. Note:interlocking paver block shall be approved by GE. 133 Material and labourSand filling under interlocking tiles including watering andconsolidationcomplete all as specified and as directed by the Engineer-in-Charge.Note: Sand shall be approved by GE before incorporation in the work. 134 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curveshall not to more than 5 mm), including making drainage opening whereverrequired complete all as specified and as directed by the Engineer-in-Charge 135 Material and Labour for 20-25 mmthick Kota stone slab as approved by GEflooring, mirror polished laid over 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. 136 Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 20-25 mm thick laid overand including 10 mm thick rendering inCM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. 137 Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc.complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrapfor schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii)The rate of cutting chases (as required) and making good surfaces to match with adjoining surfaceshall be measured and paid seperately under serialitem no. 138.00,139.00,140.00,141.00,142.00 & 143.00 of BoQ. 138 Material and Labour for modular type fittingpoint wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed multi stranded FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) 20mm bore surface onwall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colourof required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories for one light/fan/call bell/exhaust fan point controlled by one 5/6 Amps switch and including cutting chases (as required) and making good surfaces to match with adjoining surfacecomplete all as specified and as directed by Engineer-in- chargeNOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flushfixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of ScheduleA BoQ. 139 All as per item No 138 here in before but for one socket outlet 3 pin, 5/6 Amp 230 volts flush type on same boardcomplete all as specified and as directed by Engineer-in- charge. 140 All as per item No 138 here in before but for one socket outlet 3 pin, 5/6 Amp 230 volts flush type on independent board complete all as specified and as directed by Engineer-in- charge. 141 AllAs per item No 138.00here- in- beforebut for call bell point, complete all as specified and directed by Engineer-in-charge. 142 All as per item No 138 here in before but for one light point controlled by two way switch complete all as specified and as directed by Engineer-in- charge. 143 All as per item No 138 here in before but for one socket outlet 6 pin, 6/16 Amp 2 in 1 & for one flood light with cable 2.5 sqmm multistranded copper conductor FRLSH cable on the independent board including provn of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continues as earth wire connected to earth dolly complete all as specified and as directed by Engineer-in- charge. 144 Supply & Fixing modular type Switch single pole, one way, 6 Amp, one module, ISI Marked, complete all as specified and as directed by Engineer-in-charge.. 145 Supply & Fixingmodular typeSwitchsingle pole one way, 16 Amp,one module,ISI Marked complete all as specified and as directed by Engineer-in-charge.. 146 Supply & Fixingmodular type Socket outlet , multipurpose, 3 pin, single pole one way, 6 Amp,two module, shutter type ,ISI Marked complete all as specified and as directed by Engineer-in-charge.. 147 Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered typeISI marked, model fantasy complete all as specified and directed by Engineer-in-charge. 148 Supply and fixing modular Bell push, 6 amp 250 Volts, ISI Marked complete all as specified and directed by Engineer-in-charge. 149 Supply and fixing modular switch 2 way 6 amp 1 module 250 Volts, AC , ISI marked model fantasy s complete all as specified and directed by Engineer-in-charge. 150 Supply and fixingceiling rose 3 phase flush type 6 Amp 250V AC topline series with polycarbonate 20mm X 50 mmtwo to three terminal, complete all as specified and directed by Engineer-in-charge. 151 Supply and fixingstepped type electronic fan regulator flush type , ISI marked complete all as specified and directed by Engineer-in-charge. 152 Supply and fixing Electric/ Electronic Bell, music type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge. 153 Supply and Fixing in replacementSquare profile Batten decorative type wall mounted LED 20 Watt, white flux, 4 feet long, pre wired,6000K with Built driver complete fitting and all aother accessories fitting arrangements with and including providing1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector and testing complete all as specified and directed. Note: The rate of1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector is included in this item and nothing shall be paid extra on this acccount. 154 Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 9/10 watt220 V AC6000K, lineer and compact with decorative grey end caps, poycarbonate body and ribbrd opal difuser complete fitting with lamp and all other accessories fitting arrangement with and including providing1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector and testing complete all as specified and directed. Note: The rate of1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector is included in this item and nothing shall be paid extra on this acccount. 155 Supply and fixingin replacementBuilding security light IP 66luminaire with high power LED of 25 watt with toughened glass completeall as per manufacturers instructionsand fixed with Existing GI Bracket suitable for security light fitting fixing to wall / column & electrical connection to the light fitting with and including providing1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector and testing complete all as specified and directed. Note: The rate of1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector is included in this item and nothing shall be paid extra on this acccount. 156 Supply and fixing in replacement flood light luminaire with high power COB LED light fitting 70 watt LED, 5000K, IP 66 complete fitting with LED and all other accessories and fitting arrangments with and including providing1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector and testing complete all as specified and directed. Note: The rate of1.5 Sqmm twin core round copper conductor cablefrom ceiling rose to connector is included in this item and nothing shall be paid extra on this acccount. 157 Material and Labourin replacement Sub main wiring with two single core of size 6 SqmmFRLSH PVC insulated unsheathedwith multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-IISI marked including all fitting such as Tee, Elbow, bend etc drawn in andincludingone single core of size 6 SqmmFRLSH PVC insulated unsheathedwith multistranded copper conductor cable 1100 volts gradeasin contineous earth conductor cable connected to earth dollycomplete all as specified and as directed by Engineer-in- charge.(Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge..Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b)Threesingle core6SqmmFRLSH PVC insulated unsheathedwith multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length. 158 Material and Labourin replacement Sub main wiring with two single core of size 4 SqmmFRLSH PVC insulated unsheathedwith multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-IISI marked including all fitting such as Tee, Elbow, bend etc drawn in andincludingone single core of size 4 SqmmFRLSH PVC insulated unsheathedwith multistranded copper conductor cable 1100 volts gradeasin contineous earth conductor cable connected to earth dollycomplete all as specified and as directed by Engineer-in- charge.(Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge..Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b)Threesingle core4SqmmFRLSH PVC insulated unsheathedwith multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length. 159 Material and labour for inverter wiring in same conduit used in point wiring with 1.5 sqmm PVC insulated unsheathed multi stranded single core copper conductor (yellow colour) to light/fan/5A socket/bell point control by same switch complete all as specified and directed by Engineer-in-charge. 160 Supply and Fixingin repair Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-43 protection, flush mounted for metal door, powder coated DB V TPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etccomplete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ. 161 Supply and fixing in replacement(concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ. 162 Supply and fixing in replacementsingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, complete all as specified and directed by Engineer-in-charge. 163 Supply and fixingMCCB 125 Amp, 4 Pole,415 volt, short circuitbreaking capacity not less than 16KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc .complete all as specified and directed by Engineer-in-charge. 164 Supply and fixingMCB63 Amps,SPN 10 KACcurve230 V AC, 50 Hzincluding necessary attachmentcomplete all as specified and directed by Engineer-in-charge. 165 Supply and fixing MCBSP 63 Amps suitable for 230 V AC supply , rupturing capacity not less than 10 KACcurveISI marked,complete all as specified and directed by Engineer-in-charge. 166 Supply and fixingMCB5 to 32 Amps,SP,240 volts AC supply rupturing capacity not less than 10KA, CCurve , complete all as specified and directed by Engineer-in-charge. 167 Supply and Fixingexhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and making suitable hole on wall for fixing of fan andmaking good as per existing surfaces , with and including serial number of fan as issued by Engineer-in-charge and GE office namewith red colour permaent marker complete all as specified and directed.complete all as specified and directed by Engineer-in- Charge. 168 Supply and Fixingexhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers and making suitable hole on wall for fixing of fan andmaking good as per existing surfaces , with and including serial number of fan as issued by Engineer-in-charge and GE office namewith red colour permaent marker complete all as specified and directed.complete all as specified and directed by Engineer-in- Charge. 169 Supply& Fixing Ceiling fan of 1400mm sweep complete with blades, down rods, including electronic regulator (modular type, 120w, 2 module) and accessories, 230 Volts, single phase, 50 Hz, Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable sizefrom ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement, with and including serial number of fanas issued by Engineer-in-charge and GE office namewith red colour permaent marker complete all as specified and directed including taking down old fan and deposited in the store K.V. No4Bathinda as directed by Principal. 170 Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor having cross sectional area 35 Sqmm3.50 coreconforming to IS-7098 (Part-I -1988) complete allas specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately) 171 Material andLabour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cablecomplete all as specified.(Note:- Punned thickness shall be considered for payment purpose) 172 Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection , laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete allas specified and as directed by Engineer-in-Charge. 173 Material and labour in replacementfor Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means ofGI bolts/nuts/washersand including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI mediumgrade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type ofsoil , returning filling and disposal of surplus soil to a distance not exceeding 50m,complete all as specified & shown in electrical plate No. 3 ofSSR 2009 (Part-I) complete all as specified and and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. 174 Supply and Fixing 15mm bore Brass chromium plated Sink mixture, connecting legs and wall flange complete all as specified and as directed by Engineer-in-charge. 175 Supply and Fixing Aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and as directed by Engineer-in-charge. 176 Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule A/BOQ
