Special Repair To Or Md Accn Bldg No. Np 21 Of D At E Zone And Np 30 01 To 30 06 Of Aj At A Zone Under Ge (West) Ferozepur Cantt- 1 Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed. 2 Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. 3 M&L 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed.Note : WPC shall be measured and paid for separately. 4 Supply only water proofing compound. 5 M&L 80mm thick average consolidated thickness mud phuska on flat roof including 25mm thick mud plaster complete all as specified and directed. 6 M&L 40mm thick brick tiles laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed. 7 All as per ser item No 6 here-in-before but except tiles.Note : Serviceable tiles received from ser item No. 1 shall be reused after cleaning and cost of the same shall be deemed inclusive of the quoted rate. 8 APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm) land on primed surface by forced apllication complete all as specified and directed. 9 M&L applying a layer of blown grade of industrial bitumen 85/25 @ 1.20 Kilogram per Sqm over a coat of bitumen primer @ 0.30 litre per Sqm including preparation of roof surfaces complete all as specified and directed. 10 M&L APP membrane to be finished with two coats of solar reflactive bituminous Aluminium paint @ 0.1 kg per Sqm complete all as specified and directed. 11 Taking down cement plaster any description on brick or stone walls, /RCC walls surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 12 M&L rendering 15mm thick in cement mortar 1:4 on external surface of the brick wall surfaces, surfaces finished even and fair without using extra cement complete all as specified and directed. 13 M&L rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished evenand smooth without using extra cementcomplete all as specified and directed. 14 M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed. 15 M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. 16 M&L preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and directed. 17 M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distember over a coat of primer complete all as specified and directed. 18 M&L preparation of old treated plastered surfaces of walls after complete removal of existing treatment and applying two coats of cement base paintcomplete all as specified and directed. 19 M&L applying wall putty of 1mm thick interior/exterior on wall surfaces finished smooth and even complete all as specified and directed. 20 M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zink primer on steel surfaces complete all as specified and directed. 21 M&L preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 22 M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 23 M&L preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 24 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. 25 M&L marble work 18mm to 20mm thick in steps, jambs, pillars, cooking platform and like includingpointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade other than white and black types over a15 mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. 26 M&L non-skid ceramic tiles coloured 7mm to 8mm thick (square/ rectangular), premium quality area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6, complete all as specified and directed. 27 M&L non-skid ceramic tiles coloured 7mm to 8mm thick (square/ rectangular), premium quality area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. 28 S&F glazed coloured and cereamic tiles in vertical surfaces size 450mm X 350mm and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed. 29 Dismantling brickwork built in cement mortar of any specification and in any position complete all as specified and directed. 30 M&L brickwork in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed. 31 All as per ser item No. 30 here-in-before but using old serviceable bricks retrieved from dismantling item No. 29 here-in-before including proper cleaning and removal of mortar from old bricks. 32 M&L covet fillet plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) minimum radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including formork complete all as specified and directed. 33 M&L formwork to chajjas, including edges, complete all as specified and directed. 34 M&L RCC 1:1.5:3, type B-1 (using 20 mm graded stone aggregate) as in chajjas etc. complete all as specified and directed. 35 Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm Each complete all as specified and directed. 36 Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm Each complete all as specified and directed. 37 S&F factory made box type side hung steel window with pintol hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. 38 S&F factory made box type side hung steel window with pintol hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. 39 S&F factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. 40 M&L forming jambs etc. built in cement mortor 1:6 to openings including cutting toothing and properly bonding into old work also facing , jointoingand pointing to match with existing work complete all as specified and directed. 41 S&F factory made pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. 42 All as per ser item No. 41 here-in-before but size 125mm X 60mm with double rebate. 43 All as per ser item No. 41 here-in-before but size 75mm X 50mm with single rebate. 44 M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in filling of steel chowkhats, bed blocks, coping etcincluding necessary form work complete all as specified and directed. 45 S&F factory made 35mm thick second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. 46 S&F factory made 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed. 47 S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. 48 S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples as in repair complete all as specified and directed. 49 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm Each pane complete with oil putty complete all as specified and directed. 50 Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and directed. 51 Dismantling of boarding of any description and in any position complete all as specified and directed. 52 S&F 16mm - 18mm solid PVC board plain colour, fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and directed.Make : Rajshri or equivalent as approved by GE 53 S&F continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed. 54 S&F hasp and staple of Aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed. 55 S&F solid PVC door frame of size 50mm X 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010). 56 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S&F in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make : Rajshri or equivalent as approved. 57 S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed. 58 S&F PTMT butt hinge, 100mm long,fixed with steel screws with brass/bronze hinge pin complete all as specified and directed. 59 S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed. 60 S&F 100mm size butt hinges exturded Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B21 complete all as specified and directed. 61 S&F 150mm long Aluminium, anodisedbarrel tower bolts of extruded section, as fixed in repairs complete all as specified and directed. 62 S&F 250mm long Aluminium alloy anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast Aluminium alloy and fixed in repairs complete all as specified and directed. 63 S&F 125mm extruded Aluminium alloy handle as fixed in repairs complete all as specified and directed. 64 S&F 300mm mild steel helical door spring including roller and roller plate complete all as specified and directed. 65 S&F 15mm dia galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors including taking up or down old steel tubingcomplete all as specified and directed. 66 S&F 20mm dia galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors including taking up or down old steel tubingcomplete all as specified and directed. 67 Taking up or down 15mm steel tubing and connections, including cleaning for refixing & refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.Note : The cost of new fittings and accessories, if required shall deemed inclusive of quoted rates. 68 Taking up or down 20mm steel tubing and connections, including cleaning for refixing & refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.Note : The cost of new fittings and accessories, if required shall deemed inclusive of quoted rates. 69 S&F rotational moulded triple layered polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and directed. 70 S&F ball valves of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed as in repair complete all as specified and directed.Make : Prayag/ Polytuf or equivalent in approved makes 71 S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 72 S&F 125mm dia chromium plated grating doom with waste hole of PTMT (minimum weight 40 gm) complete all as specified and directed. 73 S&F 125mm PTMT grating doom with waste hole of PTMT (minimum weight 40gm) complete all as specified and directed. 74 Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation or for laying of underground cable, etc. not exceeding 10 Sqm on plan and getting out soft/loose soil, complete all as specified and direced. 75 Returing, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soill, complete all as specified and directed. 76 Removing excavated material as soil exceeding 50 m and not exceeding 250 m, depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed. 77 M&L PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. 78 M&L 150mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed. 79 M&L PCC 1:3:6, type C-2 (using 40mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and directed. 80 M&L precast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed.Note : Steel for reinforcement will be measured and paid for seperately. 81 S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed. 82 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 83 S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed. 84 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed. 85 S&F cast iron floor trap for 75 mm bore pipe with cast iron grating including jointing to waste pipe in run lead fixed with cement concrete 1:2:4, typeB-1 complete all as specified and directed. 86 S&F stainless steel sink with drainage board made of of 1mm thick sheet for kitchen or laboratory with plugs washers 38mm/40mm dia PVC waste pipe andincluding 38mm/40mm dia chromium plated waste coupling fixing cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified and directed. 87 S&F stainless steel plate rack 1mm thick racks of standard quality 900mm X 750mm X 250mm size including necessary shelves etc. as fixed in repairs complete all as specified and directed. 88 S&F wash hand basin, flat back 550mm X 400mm vitreous China (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed. 89 S&F chromium plated soapdish oval /squaretype as fixed in repairs complete all as specified and directed. 90 S&F vitreous China white squatting pan Orrissa pattern of size 580mm X 440mm with integral foot rests including necessary lime concrete and 100mm bore cast iron ‘P’ trap with 550mm to 600mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and directed. 91 S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc. and fixed in repairs complete all as specified and directed. 92 S&F looking mirror 600mm X 450mm with Aluminium channel frame, selected quality mounted on 6mm thick commercial ply wood back and fixed with chromium plated brass screws and cup washers complete all as specified and directed. 93 S&F mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as inrepairs complete all as specified and directed. 94 S&F brass chromium plated bib tap for iron pipe of 15mm borefancy type with crutch or butterfly handle, screwed down high pressure as in repair complete all as specified and directed. 95 S&F 15mm bore pillar tap, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe as in repair complete all as specified and directed. 96 S&F 15mm bore fancy type chromium plated Stop cock cast Copper alloy screwed down, high pressure screwed both ends for iron pipe or union as fixed in repairs complete all as specified and directed. 97 S&F chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed. 98 S&F 600mm long towel rail fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gm) complete all as specified and directed. 99 Demolition of stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. 100 S&F machine pressed precast 60mm thick concrete interlocking paver block (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE, set over & including 50mm sand cushioning complete all as specified and directed.Note : Sand will be measured and paid for seperately. 101 M&L sand filling under interlocking tiles floors or for laying of underground cable of required thickness including watering and consolidation complete all as specified and directed. 102 M&L 75mm thick cement concrete 1:4:8, type D-2, (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. 103 M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed. 104 Dismantling of steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. 105 S&F mild steel Fe 410 -W (Gde E-250 quality roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. 106 S&F framed work such as grills grating etc. with ends of bars shoulders or riveted, or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk way railing framework of water cooler stand, angle iron in stair steps, iron gate and similar work conforming to Fe - 290 Gde E-165 complete all as specified and directed. 107 S&F 1mm thick mild steel, plain sheet in gates and similar work cut to size, holes punched including round headed screws clout nails or rivets and fixed to steel framing with plain 40mm lap joints with rivited or welded including bending or turning up etc. complete all as specified and directed. 108 Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and directed. 109 S&F pre-painted galvalume Aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 110 Removing mud phuska/soil material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed complete all as specified and directed. 111 Demolition of reinforced cement cocrete of any description and in any position complete complete all as specified and directed. 112 M&L use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed. 113 M&L RCC 1:1.5:3, type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 114 S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed. 115 S&F 150mm long mild steel pressed handle, oval type, stove enameled black and fixed with steel screws, complete all as specified and directed. 116 S&F 200mm long mild steel barrel tower bolts stone enamelled black with bright bolt complete all as specified and directed. 117 S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed. 118 S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm including hacking out old broken glass and putty/beading complete all as specified and directed. 119 S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in Each pane complete all as specified and directed. 120 S&F 18mm thick solid PVC board plain colour, fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mm X 18mm X 500mm on three sides complete all as specified and directed. 121 S&F 20mm thick solid PVC board plain colour, fixed with screws or adhesive with complete accessaries as in shutters complete all as speciifed and directed. 122 S&F 150mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed. 123 S&F 125mm extruded Aluminium alloy handle complete all as specified and directed. 124 M&L glazed ceramic tiles, coloured (light colour as approved), of size 300mm X 200mm / 300mm X 450mm and 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. 125 Demolition of unreinforced cement concretein ground floors and paving not exceeding 15 cm thickness below or above ground level complete all as specified and directed. 126 S&F machine pressed precast 60mm thick concrete interlocking paver block (M-35) cement concrete tiles with grey cement and no pigment of approved design & pattern as approved by GE, set over & including 50mm sand cushioningcomplete all as specified and directed.Note : Sand will be measured and paid for seperately. 127 M&L Granite 18mm - 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 128 S&F 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed. 129 S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 210 gm) and fixed complete all as specified and directed. 130 S&F 15mm fancy type chromium plated stop cock with long shank and cup (concealed type) screwed down, high pressure with crutch handle both end screwed for iron pipe or union as fixed in repairs complete all as specified and directed. 131 S&F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer as in repair complete all as specified and directed. 132 S&F vitreous China white squatting pan Orrissa pattern of size 580mm X 440mm with integral foot rests including necessary lime concrete and 110mm bore PVC (SWR) P’ trap with 550mm to 600mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed. 133 Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed. 134 S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. 135 S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed. 136 S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed. 137 S&F PVC(SWR) vent cowl, for 110mm bore pipe complete all as specified and directed. 138 S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. 139 S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and directed. 140 M&L preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed. 141 M&L washing, rubbing down and stopping of distempered and painted surfaces and apply one coat of oil bound distemper complete all as specified and directed. 142 M&L washing rubbing down and stopping of cement based painted surfaces and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed. 143 M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed. 144 M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices complete all as specified and directed. 145 Taking down carefully Copper / Aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for taking down items shall be paid for separately) and making good to the disturbed surfaces of walls, floors ,etc. to match with the existing specifications complete all as specified and directed. 146 M&L point wiring complete with 1100 Volts grade PVC insulated unsheathed FRLS cable of Copperconductor, multi stranded of size 1.5 Sqmm, single core,in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheated stranded Copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Pointcontrolled by one single pole one way switch. 147 (b) One socket outlet on the sameboard controlled by one single pole one way switch 148 (c) One 5 Amps socket outlet independent controlled by one single pole 6 Amps switch. 149 All as per ser item No. 146 here-in-before but one three pin 15 Amps switch socket out let on the independent boardwith 2.5 Sqmm PVC insulated Copper conductor and 2.5 Sqmm Copper conductor for continuous earthing complete. 150 S&F switch piano flush type single pole one way5/6 Amps complete all as specified and directed. 151 S&F switch piano flush type 15 Amps, single pole one way complete all as specified and directed. 152 S&F socket outlet 2 in one, 5/6 Amps flush type complete all as specified and directed. 153 S&F socket outlet, 2 in one6 pin 5 and 15 Amps piano flush type complete all as specified and directed. 154 S&F bell push flush type 5 Amps duly complete all as specified and directed. 155 S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed. 156 S&F lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10 Watts LED bulb complete all as specified and directed. 157 S&F bell ding dong type AC 230 Volts single pole complete all as specified and directed. 158 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200mm sweep minimum air delivery 210 CFM with service value 6.00 BEE. five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 159 S&F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as required as in repair complete all as specifed and directed 160 S&F exhaust fan, steel body AC single Phase 230 Volts of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. 161 S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 Volts, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 162 S&F LED tube light fitting 1 X 18 Watts decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient230 Volts, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible Copper conductor cable with suitable size complete all as specified and directed.Make : Cat Part No LHEXBLP7UN1W018 of Make - Havells or techno-commercially equivalent in approved makes 163 S&F LED street light fitting 35 Watts 230 Volts AC outdoor type with high pressure die cast Aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. 164 S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 Volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. 165 S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amps rated bus bar, neutral link, earth bar and din rail,8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. 166 S&F MCCB 100 Amps, 415 Volts, 16 KA, 4 pole complete all as specified and directed. 167 S&F 240 Volts, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps, in the MCB DB complete with connection testing and commissioning complete all specified and directed. 168 S&F MCB single pole (SP) 240 Volts, 40 Amps, 10 KA B Series as in repair complete all as specified and directed. 169 S&F MCB, single pole and neutral 240 Volts, 32 Amps 10 KA B series as in repair complete all as specified and directed. 170 S&F sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps complete all as specified and directed. 171 S&F sub main wiring of 4 Sqmm PVC insulated unsheathed FRLS cable multistranded Copper conductor with earth wire of 4.0 Sqmm PVC insulated unsheathed FRLS cable multistranded Copper conductor including PVC conduit pipe 25 mm dia as in repair complete all as specified and directed. Note : Two run of single core 4 Sqmm cable and one run single core 4.0 Sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length. 172 M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC Concealed with 1 x 6 Sqmm PVC insulated Copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated Copper conductor single core,one run of PVC conduit shall be measured as single run. 173 Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. 174 M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise across the line of cable in trenches for protection of underground cable complete all as specified and directed. 175 S&F mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e mild steel clamps nuts & bolts etc as required complete all as specified and directed. 176 M&L earthing complete with galvanized steel plate elecrode of size60cm x 60cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5m below the ground level with top edge of earth plate at a depth not less than 1.5 m below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate). The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete 1:2:4, type B-1 (using 20 mm graded stone aggregate), excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50m as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).
