Tender For Construction Of Aganwadi Kendra Harikaranpur; 1 Supply of Cement (PPC) at site including l/unloading complete. 2 Supply of Fine Sand at site including l/unloading etc complete. 3 Supply of. Coarse Sand at site including l/unloading etc complete. 4 Supply of 20mm Stone Grite includingL/Uloading & stackingat site 5 Supply of. 40mm Brick Ballast including L/Unloading & stacking at site. 6 Supply of Bricks M150 including L/Unloading & stacking at site 7 Supply of. TMT Bar including L/Unloading at site. 8 M.S or Iron work in Angle Iron door & window frame including cutting welding & wastage including supply of labour material TMP etc required for completion of work as S.I. No 503 (a) 9 Hire Charge for M.S.iron/ wood ply shuttering with Balles for support & wooden 10 cm squre Batta,Phanti ,Gutka ,Scafolding etc also labour counting and shuttering and erection after completion of work required for proper complition including cartage to site.CHAP. 19 S.NO. 16 10 Providing and appling white cement based putty of average thickness of 1 mm aapproved brand and manufacture over the plssterd wall surface to prepare the surface even and smooth including cost of material labour and T&P etc complete. Ch 16 DSR 13.8 11 Water tank 12 Providing & fixing110 mm dia PVC Pipe 6kg/cm2 13 Shrounding and packing gradedCoarse sand in between bore wall & the Strainer including supply of Coarse Sand,labour,T&Pete required for proper completion of work. 14 Providing & fixing CPVC pipe 32 mm dia nominal bore complete with G.I.fittings . 15 Single phase Starter for submersible pump complete. 16 E/W in filling or in embankment in oridnary soil excavation to be in the form of regular pit not exceeding Half M in depth and earth work in embankment to be in 20cm. Layers including rammaing and dressing the surface to required levels & slopes and also including 1.5m. lifts and 3.00km. Lead by cartage the earth from cutting/filling to be used in making embankment are to be 1.00km distance as directed by Engineer-in-charge. S.I. No 253 17 25 mm cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 stone aggregate of sizes 12.5 mm and below) by laid over base concrete finished with floating coat of neat cement as per SI no 14.69 18 P/F glass strips of 3.15mm thickness in joints of floor and skirting at the time of laying floors, flush with floor level including labour, T&P etc, complete in all respect,2.2 cm depth. 631(a) 19 Provinding and Laying of 8 to 10 mm Thick Ivory or Light shade vetrified tiles of 600x600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement : 3 Coarse Sand ) finishing with cement slury & with pigment grouting & polishing complete i/c supply of all material labour T&P required for proper.(Ch - 14 New item ) 20 Distemperring with Oil bond distemper of approved brand and manufacture (tow coats) and of required shade on undecorated wall surface to give an even shade over and including priming coatwith cement primer of approved brand and manufacture such as berger ,J&N Salimar , Asian Paints after throughly brushing the surfacefree from mortar droppings and other foreign matters & also including preparing the surface even with plaster of parish of approved synthetic material and sand paper smoothing cost of all mterials T &P etcAs per SI no 649+650 21 Finishing wall with water proof cement paint in two coat of approved make and quality on new work with two coats at give an even shade including supply of all materials labour tools and plants etc. required for proper complete of work.As per S.I. No. 660+661. 22 Painting two coats on newwork in small area of new wood work with one coat of redimix priming paintand one coat of approved superior quality redimix paint including supply all materials labour T & P etc required for proper completion of the work as per SI no 641+642 23 Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch & ceiling rose/ angle/ batten holder on 3 mm thick phenolic laminated backelite sheet etc.,complete in all respect, as directed including matching color wash. SI No.-138 (C) 24 Wiring point for fan with 1.5 sq. mm FRLSH PVC insulated multistrand copper conductor cablein PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch & ceiling rose on 3 mm thck phenolic laminated backelite sheet etc complete in all respect, including matching color wash. SI No.-140 (C) 25 Erection and testing of fan and regulator for room height upto 3.5meters including supply of 3mm thick G.I.Pipe 19mm dia duly painted, complete in all respect as per SI No 1116 26 Supply and Fixing of Electronic Fan Regulator 120-180 V ISI Marked including all coplete as per SI No 1203 A 27 Supply and fixing of BEE3 starrated-1200mm 1709/1984 with latest amendment. The rated voltage 220/240volts,50Hz,1-phsweep ceiling fans with fan moter of A.C permanent insulation capacitor rating confirming BEE 3star rating and IS:347/79 and also comply with IS:1709/1984 with latest amendment.The rated voltage220/240volts,50Hz,1-ph A.C the fan assemble should consist of down rod ,blades,shackle canopies etc and with double ball bearing system as per S.I.No. 1501(ii) 28 Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cablein PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch and socket etc., complete in all respect, including matching color wash. SI No.-141 (C) 29 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. S.I No.- 1139 30 LED Bulb 9 watt PESL 31 For Light Distribution Board-:S&F of 6 A 240V SP MCB (10 KA) C CurveSI No.-1002, CAT B 32 supply and fixing of Hexagonal / Round GP fan Box of approved make made upof 1.00mm thick ISI marked GP sheet sopt welded four to eight holes of 25.4mm for pipe entry of the box .holes should be semi -shutterdtype with 0.5mm GP sheet made upper and lower cover duly screwed fitted with 300mm round zink coated MS Bar x 12mm & brand name should be embossed .fixing with wiring conduit laid in the rcc roof before concreting alongwith supply of all material ,labour T & P etc Required for proper completion of the work SI no 1149 33 Provinding and Laying of 8 to 10 mm Thick Ivory or Light shade vetrified tiles of 600x600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement : 3 Coarse Sand ) finishing with cement slury & with pigment grouting & polishing complete i/c supply of all material labour T&P required for proper completion of work 34 20 mm cement plaster 1:3 Cement : C Sand ) finished with 3 mm thick floating coat of neat cement as per Ch- 13 S.No. 13.90 35 25 mm cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 stone aggregate of sizes 12.5 mm and below) by laid over base concrete finished with floating coat of neat cement as per SI no 601 (a) 36 P/F glass strips of 3.15mm thickness in joints of floor and skirting at the time of laying floors, flush with floor level including labour, T&P etc, complete in all respect,2.2 cm depth. 631(a) 37 Supply an fixing of HEP Nahani trape of indian make HCI 100x75 mm 4kg 58+ch22 38 providing and fixing stainless steel ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with CI brakets and stainless steel plug 40mm including painting of fittings andbrakets , fitting and making good the walls whever required (610x460mm bowl depth 200mm as per S.I. No. 5B (ii) 39 providing and fixing 32 mm dia flexuablePVC waste pipe for sink including PVC waste fittings complete As per chapter no 24,8 B (i) 40 Providing and fixing C.P.Brass long body bib cock of standered design and of 15 mm nomonal bore of approved make conforming to IS:8931as per chapter-23 SI No 34 41 Providing and fixing water closet squatting pan (Indian tyoe W.C pan) with 100 mm sand cast Iran P or Strap, 10 liter low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Viterous china Orissa pattern W.C pan of size 580x440 mm with integral typd foot rests. Chapter- 24 SI No1 42 Providingand fixing 32 mm dia chlorinated polyvinyl chloride (CPVC)Pipes ,having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge . as per SI no 17 ( D) 43 Providingand fixing 16mm dia chlorinated polyvinyl chloride (CPVC)Pipes ,having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge .concealed work including cutting chase and making good the wall etc as per SI no 18 (A) 44 Providing and fixing C.P.Brass long body bib cock of standered design and of 15 mm nomonal bore of approved make conforming to IS:8931as per chapter-23 SI No 34 45 Providing and Laying of Pre cast Interlocking Concrete tiles of thickness 80 mm (compressive strenght not less than 30 MPA and weight 4.5 kg) including 25 mm thick local sand based levelling and dressing of surface to requied level and slope filling joints with local sand all complete 46 Boring 150 mm dia bore hole including labour, T&P etc required forcomplete of the work. 47 Lowering 110mm dia PVC Pipe in bore hole including labour, T&P etc required for proper completion of work. 48 Submersible Pump kirlosker 1.5 HP ISI marked 49 2.50 mm sq. cable for submersible moter pump 50 4 inch diaMS Clamp made with 32x5mm flat iron with nut & bolt complete. 51 100mm dia PVC End Cap 52 Solution for jointing PVC Pipe,
